Hybrid control strategy of delayed neural networks and its application to sampled-data systems: an impulsive-based bilateral looped-functional approach

Nonlinear Dynamics - In this work, the problem of hybrid control strategy for delayed neural networks is investigated via an impulsive-based bilateral looped-functional (IBBLF) approach. Firstly, a...     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

Hierarchical Porous Tubular Biochar Based Sensor for Detection of Trace Lead (II)

Hierarchical porous tubular biochar (PTBC) was prepared by selectively removing lignin simply according to reverse the pyrolysis sequence of cellulose. The properties of the PTBC sample were characterized by XRD, SEM, TEM, Raman spectra, cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical performances of PTBC modified on the screen-printing electrode illustrated excellent detection of lead ions (lead (II)) in water with the linear range (0.5–120 μg/L) and the detection limit (0.02 μg/L) by in-situ bismuth film square wave anode stripping voltammetry.     

Multi-functional cotton textiles design using in situ generating zeolitic imidazolate framework-67 (ZIF-67) for effective UV resistance,antibacterial activity,and self-cleaning

Cellulose - In this study, a multifunctional cotton fabric with durable superhydrophobic, antibacterial, and UV resistance properties was prepared by in situ growth of zeolitic imidazolate...     

基于ZigBee技术的信息交互系统设计与实现

基于生物电的人-机交互（HCI）技术作为特殊场景下常规人-机交互方法的一种补充,具有非常广阔的应用前景。为了解决基于生物电的HCI系统中多用户通信问题,文章设计并实现了一种基于ZigBee技术的信息交互系统。该系统主要由ZigBee无线通信模块、信息生成/处理模块、串口通信模块三部分组成,用以实现多用户间使用眼电信号（EOG）进行无线信息交互。在实验室环境下,眼电信号有效检出率98.2%,传输距离在无遮挡、无路由的情况下可达到70m。实验结果表明该系统具有识别率高、稳定性好、配置简单、使用方便等优点,具有较强的实际应用价值。     

STUDY ON THE OVERALL PRESSURE BALANCE OF A DOWNFLOW CIRCULATING FLUIDIZED BED SYSTEM

A pressure balance model for a circulating fluidized bed unit that incorporates a downer has been proposed. The model predictions were validated with the experimental data obtained from a special cold-model circulating fluidized bed. Comparison of the operation stability between a CFB downer and a CFB riser has been carried out. Only one critical gas velocity exists in the CFB-riser for a given riser solids flux, while there can be many critical gas velocities for the operation of a CFB downer. Therefore, it is possible to achieve high solids concentration in a CFB downer if appropriate operating conditions are used.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

时一空守恒元解元（CE／SE）方法综述

时一空守恒元解元方法是近年来兴起的一种全新的高分辨率守恒型方程计算方法．它具有物理概念清晰、计算精度高和格式构造简单等优点,是一种具有广阔发展前景的计算方法．本文详细地介绍了cE／ss方法的基本原理、发展历史、应用情况和最新进展、并指出了当前研究的不足和发展方向．     

腔内倍频调Q激光器中脉冲光场的时间不稳定性研究

以腔内倍频调Q激光器工作原理为基础,研究了多种形式抽运光分布的情况下倍频光的脉冲形状以及脉冲持续过程中光场分布的时间不稳定性,分析了倍频光光束质量随时间的变化规律.发现腔内倍频调Q激光器输出的倍频光光场分布在脉冲的持续过程中并不稳定,呈持续变化.对高斯型抽运的情况研究发现,减小腔长会使脉冲光场分布的不稳定性减小;而增加...