Multifunctional fibrous wound dressings for refractory wound healing

Refractory wounds have always been an important issue to healthcare systems, whose healing process is always delayed by multiple factors, including bacterial infections, chronic inflammation, and excessive exudates, etc. Employing multifunctional wound dressings is recognized as an effective strategy to deal with refractory wounds, which has yielded promising outcomes in recent years. Among these advanced wound dressings, fibrous dressings have gained growing attention due to their unique merits. Such wound dressings have demonstrated great potential in delivering theranostic agents, such as antibacterial agents, anti-inflammatory drugs, growth factors, and diagnostic probes, etc., for the purposes of accelerating wound healing. This paper reviews the development of multifunctional fibrous dressings and their applications in treating refractory wounds. The construction approaches of novel fibrous dressing with capabilities of antibacterial, anti-inflammation, exudate management and diagnosis were also introduced. Furthermore, the existing problems and challenges are also discussed briefly.     

基于Retinex理论与概率非局部均值的红外图像增强方法

针对传统红外图像增强算法中细节模糊及过度增强的问题,提出了一种基于Retinex理论与概率非局部均值相结合的红外图像增强方法.首先通过单尺度Retinex方法调整图像中过暗与过亮部分的灰度级;然后利用概率非局部均值对图像进行分解处理得到基本层与细节层,对基本层采用直方图均衡化拉伸对比度,对细节层采用非线性函数进行增强;最后,将不同层次的结果融合得到对比度与细节增强的红外图像.用该方法对多组不同场景的红外图像进行仿真实验,并将其与多种增强方法进行主、客观对比分析,结果表明所提方法在红外图像的细节及对比度增强方面都获得了更好的效果.     

Promotion of a quality standard for Porana sinensis Hemsl. based on the efficacy-oriented Effect-Constituent Index

Multicompound determination for the quality control of traditional Chinese medicine (TCM) may often be inadequate, since these compounds may not be associated with, or fully represent, the clinical effects of TCM. Moreover, the individual contributions of each constituent to the pharmacological effect are often not considered. In China, Porana sinensis is widely used as a substitute for Erycibe sources to treat joint pain and rheumatoid arthritis. The existing quality control methods for P. sinensis neither consider the individual contributions of various compounds nor control the actual quality associated with different clinical efficacies. In the present study, a novel efficacy-oriented approach, named the effect-constituent index (ECI), was established for P. sinensis. Analyses of the spectrum–effect relationship and components in rat plasma were conducted to systematically and scientifically select quality markers. Quantitative analysis of multicomponents via a single marker method was introduced to enhance the practical application value of the established ECI. The established ECI shows a good ability to distinguish and predict the bioeffect-based quality of P. sinensis. The present study also provides a reference for the establishment and application of ECI as a quality control method for TCMs.     

Synthesis of Mesoporous Wall‐Structured TiO2 on Reduced Graphene Oxide Nanosheets with High Rate Performance for Lithium‐Ion Batteries

Mesoporous wall‐structured TiO₂ on reduced graphene oxide (RGO) nanosheets were successfully fabricated through a simple hydrothermal process without any surfactants and annealed at 400 °C for 2 h under argon. The obtained mesoporous structured TiO₂–RGO composites had a high surface area (99 0307 m² g^?1) and exhibited excellent electrochemical cycling (a reversible capacity of 260 mAh g^?1 at 1.2 C and 180 mAh g^?1 at 5 C after 400 cycles), demonstrating it to be a promising method for the development of high‐performance Li‐ion batteries.     

实验仪器和教学方法优化研究

针对大学生物理知识减少和仪器设备智能化的现状,在综合分析的基础上,提出了相应的对策.     

多片导模法蓝宝石晶体的缺陷研究

使用导模法(EFG)生长了多片a面蓝宝石晶体。显微拉曼光谱结合电感耦合等离子体发射光谱(ICP-AES)测试得出晶体的气泡中可能存在含S化合物。晶体表面明显的生长条纹主要与温度、生长速度的波动以及模具的加工精度有关。化学腐蚀分析表明晶体位错密度在4.2×10⁴ cm^-2,未存在小角度晶界缺陷,双晶摇摆曲线半峰宽(FWHM)为70.63″。由于采用石墨保温材料,晶体中存在F心与F⁺色心。晶体在400~3 000 nm波段透过率高于80%,空气中退火后可减弱色心吸收。本文研究结果可为蓝宝石晶体缺陷形成理论研究提供参考,也可为导模法蓝宝石工业生产技术改进提供借鉴。     

柠檬果茶中游离态和键合态挥发性成分分析

以柠檬果茶为研究对象,建立了顶空固相微萃取前处理结合气相色谱质谱联用技术测定其中挥发性化合物的分析方法。采用开水冲泡对样品进行提取,通过Amberlite XAD-2大孔吸附树脂对柠檬果茶中的糖苷类挥发性组分键合,分离游离态和键合态化合物,甲醇溶剂作为洗脱剂对键合态化合物进行洗脱,Almondsβ-D-葡萄糖苷酶对其酶解。使用气质联用对样品中游离态和键合态挥发性成分进行检测,其结果根据数据库匹配和对比文献保留时间定性,内标法进行定量。结果表明,柠檬果茶中含有游离态物质24种,键合态物质16种,主要为(+)-柠檬烯、1-辛醇、橙花醇、(-)-4-萜品醇、alpha-松油醇等。方法为花果茶干燥工艺提供参考。     

等热流密度加热垂直下降液膜的研究

利用等热流密度加热条件下降膜流动的三维模型方程进行线性稳定性分析和数值模拟。线性稳定性分析表明，模型方程在小到中等Reynolds数下都适用，并且流向不稳定性增长率随着Reynolds数和Marangoni数增加而增加，展向不稳定性增长率则随着Marangoni数增加而增加，随着Reynolds数增加而减小，流向和展向对扰动波数都存在一个不稳定区间。三维数值模拟表明，在等热流密度加热条件下，液膜在随机扰动的情况下最终会形成带孤立波的三维溪流状结构，液膜与气体的换热也因溪流状结构的出现而加强；在随机扰动的基础上引入占优势地位的展向最不稳定扰动会使得换热增强，液膜会提前破裂；在随机扰动的基础上引入占优势地位的流向最不稳定扰动时，液膜的换热会增强，但不会提前破裂；在随机扰动的基础上同时引入占优势地位的流向和展向最不稳定扰动时，换热会加强且液膜会提前破裂。