Virtual Field Characterization for Ratcheting Effect Under Cyclic Loading

Experimental Mechanics - Ratcheting is an important mechanical behavior of metals and alloys, which is caused by the repeated accumulations of tensile and compressive strain in circle load....     

非富勒烯受体DA'D型稠环单元的结构修饰及电池性能研究

近年来,设计和合成高性能非富勒烯受体(NFAs)材料已经成为太阳能电池研究领域的前沿课题。基于DA'D型稠环结构的NFAs由于具有吸光系数高、能级和带隙可调、结构易于修饰、分子可高效合成、光电学性能优异等优点而受到了越来越广泛的关注。在短短7年的时间里,能量转换效率(PCE)从3%~4%提高到18%。2019年初邹应萍等报道了一个优秀的受体分子Y6,与PM6共混制备单结电池,获得了15.7%的能量转换效率。Y6类受体材料的中心给电子单元为DA'D型稠环结构,缺电子单元(A')通过氮原子与两个给电子单元(D)并联形成稠环结构,这有助于降低前线分子轨道能级并增强吸收,同时与氮相连的两个烷基链和位于噻吩并噻吩β位的两个侧链则有助于提高溶解度及调节结晶性。自Y6问世以来,人们对分子的结构剪裁进行了深入的研究,并报道了数十种新的结构。在这些新的受体中,DA'D部分的结构裁剪对提高器件效率和太阳能电池的性能起着至关重要的作用。本文对A'、D单元和侧链结构修饰的研究进展进行了综述。通过选择几组受体,对最近报道的分子进行分类,并将它们的光学、电化学、电学和光电性质与精确的结构修饰相关联,从而对结构-性能关系进行全面概述。     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Effect of temperature on the interactions between cellulose and lignin via molecular dynamics simulations

Cellulose - Heating is essential in various biomass pre-treatments and thermal conversion processes. It is of practical significance to study the characteristics of cellulose-lignin and...     

算子代数上2-局部Lie三重导子的结构

设X是维数大于2的Banach空间,映射δ:B(X)→B(X)是2-局部Lie三重导子,则对所有A∈B(X)有δ(A)=[A,T]+φ(A),这里T∈B(X),φ是从B(X)到FI的齐次映射且满足对所有A,B∈B(X)有φ(A+B)=φ(A),其中B是交换子的和.     

Facile fabrication of oxygen-doped carbon nitride with enhanced visible-light photocatalytic degradation of methyl mercaptan

Research on Chemical Intermediates - Element doping has demonstrated an effective strategy for enhancing photocatalytic performance of carbon nitride (CN). Herein, we reported that oxygen-doped CN...     

Electrochemiluminescence Enhanced by the Synergetic Effect of Porphyrin and Multi-walled Carbon Nanotubes for Uric Acid Detection

The design and exploration of efficient, stable and environmentally compatible organic emitters for an electrochemiluminescence (ECL) sensor is a promising topic. Herein, a novel environmentally-friendly luminophore, ZnBCBTP@MWCNTs, were fabricated via self-assembly of porphyrin molecules (ZnBCBTP) onto multi-walled carbon nanotubes (MWCNTs). The resulting luminophore ZnBCBTP@MWCNTs displayed not only the highly ECL property and but also the good accelerated electron mobility. Then, a label-free ECL biosensor based ZnBCBTP@MWCNTs was constructed for the ultrasensitive detection of uric acid. Excitingly, this proposed ECL biosensor performed a good linear relationship in the range of 0–300 μM with a low detection limit of 1.4 μM, thus offering another reliable and feasible sensing platform for clinical bioanalysis with good selectivity, stability, and repeatability.     

Portfolio Selection and Risk Control for an Insurer With Uncertain Time Horizon and Partial Information in an Anticipating Environment

Methodology and Computing in Applied Probability - This paper is devoted to the study of an optimal investment and risk control problem for an insurer. The risky asset process and the insurance...     

氧等离子体对以石墨为碳源合成的CVD金刚石颗粒的影响

采用一种新型的金刚石颗粒制备方法,利用微波辅助化学气相沉积技术,向反应室内通入氢气,以固态石墨片同时作为碳源和衬底沉积金刚石颗粒.利用该方法合成的金刚石颗粒具有微米级尺寸,可用作研磨剂、抛光剂、形核剂等.但是合成的金刚石颗粒中仍含有少量的非晶碳,且合成颗粒的尺寸均匀性有待提高.为解决以上问题,本文中在反应不同阶段(初期、中期及末期)通入氧气,形成氧等离子体;研究氧等离子体对合成的金刚石颗粒形貌、尺寸、质量、纯度的影响,以及随氧等离子体添加阶段不同而产生的不同变化情况.结果 表明,经氧等离子体处理的金刚石颗粒形貌略有改变,表面光滑度更好,且金刚石颗粒尺寸的一致性有所提高;经过激光粒度测试发现,金刚石颗粒的尺寸主要集中在25～ 29 μm.添加氧等离子体有助于消除金刚石中的非晶碳,提高金刚石纯度;且在反应初期添加氧等离子体可最大程度提高金刚石颗粒质量.