Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Shooting flexible electronics

The trends of the future electronic devices should be miniaturized,flexible,stable,portable,light,and highly integrated.Although flexible electronic products(i.e.,flexible display products^[1-3],batteries^[4,5],cell phones[6])have been commercially available recently,which represents the starting of a new era in electronics,these progresses are still in their infancy and more efforts are required to boom their multifunction and speed up their marketization from lab.Considering their low-cost and mass-productive synthesis technologies,rich species,high performances,and especially,the excellent flexibility and stability,organic materials(insulating,conductive and semiconducting)have triggered the tide of the development of"plastic electronics",especially in transistors,an indispensable logic device in these logic-control based devices(i.e.,intelligent electronics).     

USING EIGENMODULI AND EIGENSTATES TO EVALUATE THE POSSIBILITY OF MARTENSITIC PHASE TRANSFORMATIONS

Journal of Applied Mechanics and Technical Physics - The possibility of phase transitions (martensitic transformations) in&nbsp;shape-memory alloys is evaluated using the concept of eigenmoduli...     

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Acta Mechanica Sinica - Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood...     

On the Theory of Acoustic Scanning of Damage to Underground Pipelines

Acoustical Physics - The paper studies the evolution of a pulsed signal initiated by the pushing of a cylindrical piston and propagating through a stationary fluid filling a buried pipeline with an...     

硅和锗纳米线的原子排布和电荷分布的密度泛函紧束缚方法研究

低维硅锗材料是制备纳米电子器件的重要候选材料，是研发高效率、低能耗和超高速新一代纳米电子器件的基础材料之一，有着潜在的应用价值。采用密度泛函紧束缚方法分别对厚度相同、宽度在0.272 nm~0.554 nm之间的硅纳米线和宽度在0.283 nm~0.567 nm之间的锗纳米线的原子排布和电荷分布进行了计算研究。硅、锗纳米线宽度的改变使原子排布，纳米线的原子间键长和键角发生明显改变。纳米线表层结构的改变对各层内的电荷分布产生重要影响。纳米线中各原子的电荷转移量与该原子在表层内的位置相关。纳米线的尺寸和表层内原子排列结构对体系的稳定性产生重要影响。     

Complexes of Nitrilotriacetic Acid with Amines. Molecular Structures of 2-Ammonioethanol Nitrilotriacetate and Bis{2-Ammonio-2-(Hydroxymethyl)propane-1,3-Diol} Nitrilotriacetate

Crystallography Reports - Reactions of nitrilotriacetic acid with 2-aminoethanol, 2-amino-2-(hydroxymethyl)propane-1,3-diol, and 2,2'-(ethylenedioxy)bis(ethylamine) afford the following salts...     

Crystal Structure of the First Representative of the Eudialyte Group with Primitive Unit Cell

Crystallography Reports - The first representative of the eudialyte group with a primitive unit cell has been investigated by X-ray diffraction analysis, electron probe microanalysis, and IR...     

Optimal control of an SIQRS epidemic model with three measures on networks

Nonlinear Dynamics - At present, the main measures for disease control are vaccination, quarantine and treatment. Taking the three measures into consideration, time-varying optimal control problems...