Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Acta Mechanica Sinica - Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood...     

A stable pillared metal–organic framework constructed by H4TCPP ligand as luminescent sensor for selective detection of TNP and Fe3+ ions

A novel luminescent metal–organic framework ( Zn‐TCPP/BPY ) with pillared structure based on 2,3,5,6‐tetrakis(4‐carboxyphenyl)pyrazine (H₄TCPP) and 4,4′‐bipyridine (BPY) has been designed and synthesized through a solvothermal reaction. The [Zn₂(COO)₄] paddlewheel units are linked by TCPP^4? ligands to form two‐dimensional layers and further connected by BPY ligands as pillars to construct the twofold interpenetrating three‐dimensional framework. Interestingly, Zn‐TCPP/BPY possesses outstanding stability in organic solvents and water as well as maintains its structural rigidity in aqueous solutions of different pH values (3–12). After activation, Zn‐TCPP/BPY possesses permanent porosity with Brunauer–Emmett–Teller surface area of 630 m² g^–1. Remarkably, Zn‐TCPP/BPY displays excellent fluorescent property in virtue of the aggregation‐induced emission effect of the H₄TCPP ligand, which can be highly active and quenched by small amounts of 2,4,6‐trinitrophenol (TNP) and Fe³⁺ ions. Furthermore, the detection effect of Zn‐TCPP/BPY remains basically the same even after five cycles. The excellent stability, high sensitivity, and recyclability of Zn‐TCPP/BPY make it an outstanding chemical sensor for detecting TNP and Fe³⁺ ions.     

Random copolymerization of macromonomers as a versatile strategy to synthesize mixed-graft block copolymers

The random copolymerization of norbornene-functionalized macromonomers was explored as a method of synthesizing mixed-graft block copolymers (mGBCPs). The copolymerization kinetics of a model system of polystyrene (PS) and poly(lactic acid) (PLA) macromonomers was first analyzed, revealing a gradient composition of side chains along the mGBCP backbone. The phase separation behavior of mGBCPs with PS and PLA side chains of various backbone lengths and side chain molar ratios was investigated, and increasing the backbone length was found to stabilize the phase-separated nanostructures. The graft architecture was also demonstrated to improve the processability of the mGBCP, compared to a linear counterpart. Investigations of mGBCPs comprised of polydimethylsiloxane and poly(ethylene oxide) side chains exemplified the diverse self-assembled morphologies, including a Frank-Kasper A15 phase, that can be obtained with mGBCPs synthesized by random copolymerization of macromonomers. Lastly, a ternary mGBCP was synthesized by the copolymerization of three macromonomers.     

Effects of Thieno[3,2-b]thiophene Number on Narrow-Bandgap Fused-Ring Electron Acceptors

Chinese Journal of Polymer Science - We synthesize and compare four near-infrared absorbing fused-ring electron acceptors named as nTTIC (n=2, 3, 4, and 5), based on different number of...     

Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application

A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples.     

Determination of selected polychlorinated biphenyls in soil and earthworm (Eisenia fetida) using a QuEChERS‐based method and gas chromatography with tandem MS

Soil and earthworms are important objects in soil pollution assessment and environmental behavior and toxicity study for polychlorinated biphenyls. Accelerated solvent extraction and solid‐phase extraction are generally required for the extraction and clean‐up of polychlorinated biphenyls in soil and earthworm, which are tedious and time‐consuming. In this work, a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure combined with gas chromatography and triple quadrupole mass spectrometry was developed for the determination of 20 selected polychlorinated biphenyl congeners in soil and earthworm. Different extraction times, solvents, and clean‐up adsorbents were compared and optimized. The average recoveries from spiked soils ranged between 70 and 120% with satisfactory relative standard deviations for all the polychlorinated biphenyls. In earthworm, the recoveries of polychlorinated biphenyls 180, 183, and 189 were relatively low (< 70% in some spiking levels) compared to that of the other polychlorinated biphenyls. The limits of quantification were in the range of 0.01–0.05 ng/g. The method was successfully applied to the analysis of 66 agricultural soils. To our knowledge, a combined method based on QuEChERS for the determination of polychlorinated biphenyls in soil and earthworms has not been published before. The procedure proved to be simple, sensitive, efficient, and environmentally friendly.     

Ambient Preparation of Benzoxazine-based Phenolic Resins Enables Long-term Sustainable Photosynthesis of Hydrogen Peroxide

Rational design of polymer structures at the molecular level promotes the iteration of high-performance photocatalyst for sustainable photocatalytic hydrogen peroxide (H₂O₂) production from oxygen and water, which also lays the basis for revealing the reaction mechanism. Here we report a benzoxazine-based m-aminophenol-formaldehyde resin (APFac) polymerized at ambient conditions, exhibiting superior H₂O₂ yield and long-term stability to most polymeric photocatalysts. Benzoxazine structure was identified as the crucial photocatalytic active segment in APFac. Favorable adsorption of oxygen/intermediates on benzoxazine structure and commendable product selectivity accelerated the reaction kinetically in stepwise single-electron oxygen reduction reaction. The proposed benzoxazine-based phenolic resin provides the possibility of production in batches and industrial application, and sheds light on the de novo design and analysis of metal-free polymeric photocatalysts.     

重量法测定土壤水溶性盐总量的优化

土壤水溶性盐是表征土壤盐碱化程度的重要指标,也是评价耕地地力的重要参数,被纳入第三次全国土壤普查（“三普”）监测指标体系中。重量法是测定土壤水溶性盐总量的最常用方法,其测定过程易受多种因素影响,导致其测定结果不准。鉴于此,本文设计试验分别验证了水溶性盐浸提和浸提液固液分离这两个过程对测定结果的影响,结果表明浸提液固液分离是影响土壤水溶性盐总量测定准确度和精密度的主要因素。基于此进一步探究4种不同固液分离方式（布氏漏斗过滤、滤膜真空抽滤、离心、滤纸组合过滤）对测定结果的影响,结果表明相较于其它方式,滤纸组合过滤测定结果准确度高,适用于土壤水溶性盐总量的测定。对改进后的重量法测定土壤水溶性盐总量进行方法学确认,结果表明其检出限为0.01 g/kg,测定下限为0.04 g/kg;方法的准确度和精密度、适用范围等均符合相关要求。本文推荐的土壤水溶性盐总量测定方法为：土壤样品采用1:5土水比浸提,180 r/min振荡3 min,浸提液采用滤纸组合自然过滤;其测定结果的准确度和精密度符合相关要求。本文旨在为“三普”内业检测提供参考和借鉴,为全面摸清不同区域土壤水溶性盐含量水平及土壤盐渍化程度提供技术支撑。     

Determination of PEGylation homogeneity of polyethylene glycol-modified canine uricase

Polyethylene glycol-modified canine uricase (PEG-UHC) was prepared by modifying the ε-amino group of lysine residues on the canine uricase (UHC) protein to near-saturation with 5 kDa monomethoxyl-polyethylene glycol succinimide (mPEG-SPA-5k). In order to accurately determine the PEGylation uniformity of PEG-UHC, CZE, 3–8% gradient gel SDS-PAGE, and imaging CIEF (iCIEF) analyses were compared. CZE could not effectively separate PEG-UHC proteins with different degrees of modification, 3–8% gradient gel SDS-PAGE could separate PEG-UHC into seven gel bands; however, most of the gel bands were smeared or blurred, and the separation of PEG-UHC samples by iCIEF was significantly better than that by 3–8% gradient gel SDS-PAGE. Under denatured conditions, iCIEF separated 12 pI peaks, and could also accurately quantify the relative monomer PEG-UHC content. More than 85% of the total monomeric PEG-UHC was conjugated with 7–12 PEG molecules; of this 85%, approximately 40% was conjugated with 9–10 PEG molecules. These results demonstrated that iCIEF exhibits good potential for determining the PEGylation homogeneity of PEGylated protein drugs.