Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

Modeling and design of a tuned liquid damper using triangular-bottom tank by a concentrated mass model

Nonlinear Dynamics - Rectangular flat-bottom liquid tanks known as tuned liquid dampers (TLDs) are often used as passive mechanical dampers. Sloped- and triangular-bottom TLDs have been reported to...     

A new periodic pattern with five‐neighbored domain packing from ABC triblock terpolymer/B homopolymer blend

Self‐assembled structures from poly(isoprene‐b‐styrene‐b‐2‐vinylpyridine)(ISP)/styrene homopolymer blend were investigated. Five terpolymers whose total molecular weight, M, is in the narrow range of 121k < M < 214k, and volume fractions of the center block polystyrenes, ?_S, are similar at around 0.55, were prepared as parent block terpolymers. Their ?_P/?_I ratios, used as an indicator of asymmetry, are varied in the range 0.32 < ?_P/?_I < 2.46. Three low‐molecular weight styrene homopolymers with molecular weights of 3k, 9k, and 12k, respectively, were mixed with those block terpolymers to produce blends with almost constant styrene content within the range 0.65 < ?_S < 0.68. Both ISP/S(3k) and ISP/S(12k) blend series show a morphological transition from tetragonally packed cylinders (TPC) to double hexagonal structure (DHS) with hexagonally arrayed polyisoprene cylinders, each surrounded by six thin cylinders as satellites. If one focuses on ISP‐III(150k)/S blends whose ?_P/?_I is 0.88, TPC for ISP‐III/S(3k) was transformed to DHS for ISP‐III/S(12k), evidently due to the molecular weight effect of the added homopolymer. Finally a new periodic pattern, having P cylinders surrounded by five I cylinders each, has been discovered from ISP‐III/S(9k) at overall composition of ?_I/?_S/?_P = 0.17/0.68/0.15 and polystyrene block/styrene homopolymer ratio of w_S(b)/w_S(h) = 1.4. This structure was confirmed to possess hexagonal symmetry with larger unit cell than regular patterns ever known by X‐ray diffraction experiment. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 907–911     

Formation of Supramolecular Nanostructures through in Situ Self-Assembly and Post-Assembly Modification of a Biocatalytically Constructed Dipeptide Hydrazide**

Aqueous self-assembly of short peptides has attracted growing attention for the construction of supramolecular materials for various bioapplications. Herein, we describe how the thermolysin-assisted biocatalytic construction of a dipeptide hydrazide from an N-protected amino acid and an amino acid hydrazide leads to the formation of thermally stable supramolecular hydrogels. In addition, we demonstrate the post-assembly modification of the supramolecular architectures constructed in situ tethering hydrazide groups as a chemical handle by means of fluorescence imaging.     

Multiply Twisted Chiral Macrocycles Clamped by Tethered Binaphthyls Exhibiting High Circularly Polarized Luminescence Brightness

Chiral macrocyclic dimers, trimers, and tetramers composed of paraphenylene and tethered binaphthyl were synthesized, and their molecular structures and chiroptical properties were investigated. X-ray analysis and theoretical calculations revealed that multiple twisted molecular structures – dimers, trimers, and tetramers – adopt figure-of-eight, Möbius triangle, and concave rectangle structures, respectively. These homologues have large ϵ values in their UV-vis absorption spectra because of the π-conjugation of the naphthalene-phenylene-naphthalene frameworks. Owing to the shape-persistent ring structure and tethering with −OCH₂CH₂O−, high fluorescence quantum yields and a relatively high dissymmetry factor g_CPL in circularly polarized luminescence (CPL) spectra were achieved. This results in CPL brightness (B_CPL) of over 100, which is greater than that of the conventional organic CPL dye.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

Mechanistic Study of the Solvent-Dependent Formation of Extended and Stacked Supramolecular Polymers Composed of Bis(imidazolylporphyrinatozinc) Molecules

Bis(imidazolylporphyrinatozinc) molecules linked through a 1,3-butadiynylene moiety respond to the solvents they are dissolved in to afford exclusively extended (E) or stacked (S) supramolecular polymers. This system is expected to be a solvation/desolvation indicator. However, the principles underlying the solvent-dependent formation of the two types of polymers and the mechanism of the transformation between them are unclear. The formation of the polymers is considered to depend on the two types of complementary coordination bonds that can be formed and the π–π interactions between the porphyrins. In this study, the contributions and solvent dependence of both the coordination bonds and the π–π interactions have been investigated. The results clearly indicate that the coordination bonds are weakly or little solvent-dependent, and that the π–π interactions function effectively only in the inner porphyrins of the S-polymer and are strongly solvent-dependent. Thermodynamic analysis revealed that the formation of the E- or S-polymer in solution is determined by the total energies and the type of solvent used. The transformation of the E- to S-polymer was investigated by gel permeation chromatography. The kinetics of the transformation were also determined. The role of the terminal imidazolylporphyrinatozinc moieties was also investigated: The results indicate that the transformation from the E- to S-polymer occurs by an exchange mechanism between the polymers, induced by attack of terminal free imidazolyl groups on a polymer to zinc porphyrins on other polymers.     

Control of Axial Chirality by Planar Chirality Based on Optically Active [2.2]Paracyclophane

Optically active X-shaped molecules based on the planar chiral [2.2]paracyclophane building block were prepared, in which di(methoxy)terphenyl units were stacked on the central benzene rings. At 25 °C, anisolyl rings freely rotate in solution, while in the crystal form, they are fixed by intramolecular CH–π interactions, thereby leading to the expression of the axial chirality, i.e., propeller chirality was exhibited by the planar chiral [2.2]paracyclophane moiety. The X-shaped molecule exhibited good circularly polarized luminescence (CPL) profiles with moderate Φ_PL and a large g_lum value in the order of 10⁻³ at 25 °C, in solution. In contrast, at −120 °C, dual CPL emission with opposite signs was observed. According to the theoretical studies, the rotary motion of the anisolyl units is suppressed in the excited states, and so emission from two isomers could be observed. These results demonstrate that the axial chirality was controlled by the planar chirality, leading ultimately to propeller chirality.     

Spectral Mismatch Effect of Ultraviolet Radiometers in Actual UV-C Measurement

The management of radiant exposure to ultraviolet (UV) radiation, especially in the wavelength range from 100 nm to 280 nm (i.e. UV-C), is important for virus inactivation or photobiological safety. Recently, many commercial UV radiometers have been used to measure UV-C irradiance for industrial and public applications. The accuracy of the four types of commercial UV radiometers was investigated by comparing the reference irradiance values obtained from the spectral irradiance standard. It was found that the displayed values of the UV radiometers have discrepancies, such that the measured value can be more than twice the actual value in a certain case. The spectral mismatch between the calibration and test sources is a major factor in the discrepancies in the UV-C measurements. With spectral mismatch correction, most corrected values show a tendency to improve the result to approaching the reference values within 20%. Users need to provide spectral information about the source and radiometer used for UV-C measurement.     

Heterodinuclear M1M2 Complexes (M1=Ni,Pd, Pt; M2=Rh,Ir) Supported by a Tetradentate Phosphine Ligand and Their Application for Hydrosilylation

A new series of cationic heterodinuclear complexes, [M¹M²Cl₂(meso-dpmppp)(RNC)₂]PF₆ (M¹=Ni, M²=Rh, R=^tBu ( 1 a ); M¹=Pd, M²=Rh, R=^tBu ( 2 a ), Xyl ( 2 b ); M¹=Pt, M²=Rh, R=^tBu ( 3 a ), Xyl ( 3 b ); M¹=Pd, M²=Ir, R=^tBu ( 4 a )), supported by a tetradentate phosphine ligand, meso-Ph₂PCH₂P(Ph)(CH₂)₃P(Ph)CH₂PPh₂ (meso-dpmppp), were synthesized by stepwise reactions of meso-dpmppp with NiCl₂ ⋅ 6H₂O or MCl₂(cod) (M=Pd, Pt), forming mononuclear metalloligands of [M¹Cl₂(meso-dpmppp)], and with [M²Cl(cod)]₂ (M²=Rh, Ir) and RNC (R=^tBu, Xyl) in the presence of [NH₄][PF₆]. The related neutral PdRh complex, [PdRhCl₃(meso-dpmppp)(XylNC)] ( 5 ), was also prepared. The structures of 1 – 5 were determined by X-ray analyses to contain two square planar d⁸ metal centers with face-to-face arrangement, where meso-dpmppp supports M¹ and M² metal ions in cis/trans-P,P coordination mode, combining cis-{M¹P₂Cl₂} and trans-{M²P₂(CNR)₂} units. Complexes 1 – 4 showed an intence characteristic absorption around 422–464 nm derived from Rh^I→RNC MLCT transition (HOMO→LUMO+1), which are influenced by changing M¹ (Ni^II, Pd^II, Pt^II) metal ions since HOMO composed of dσ* orbitals appreciably destabilized by changing M¹ from Ni to Pd, and Pt. The electronic structures of 1 a – 4 a were investigated on the basis of DFT calculations and NBO analyses to show weak but noticeable d⁸–d⁸ metallophilic interaction as empirical dispersion energy of 0.9–1.5 kcal/mol without M¹–M² covalent bonding interaction. In addition, 1 – 5 were utilized as catalysts for hydrosilylation of styrene, and the NiRh complex 1 a was found to show higher activity and chemo- and regioselectivity compared with 2 – 5 .