Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Biohybrid Organic Heterostructure Based on Chlorophyll-Bacteriochlorophyll Aggregates for Ecofriendly Hydrogen Production

Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti₃C₂T_x nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti₃C₂T_x composite has a high HER performance with 114 μmol/h/g_cat, which is much higher than the BChl@Ti₃C₂T_x and Chl@Ti₃C₂T_x composites.     

Synthesis of Bis(phosphanyl)alkane Monosulfides by the Addition of Diphosphane Monosulfides to Alkenes under Light

Bis-phosphanated compounds are regarded as the most ubiquitous privileged ligand structures in transition-metal catalysis. The development of highly atom economical reactions is of great importance for their syntheses because less atom economical methods often require complicated purification procedures under inert atmospheres to remove excess starting materials and byproducts. Herein, the photoinduced addition reactions of diphosphane monosulfides bearing P^V(S)−P^III single bonds to alkenes is disclosed. These reactions require only equimolar amounts of the diphosphane monosulfide relative to the alkene and facilitate highly selective introduction of two different types of phosphorus-containing groups, such as thiophosphoryl and phosphanyl groups, into a variety of alkenes without any catalyst, base, or additive.     

Embedding of RCD⁎(K,N) spaces in L2 via eigenfunctions

In this paper we study the family of embeddings ${\mathrm{\Phi }}_t$ of a compact ${\mathrm{RCD}}^{?}(K,N)$ space $(X,\mathsf{d},\mathfrak{m})$ into $L^2(X,\mathfrak{m})$ via eigenmaps. Extending part of the classical results [10], [11] known for closed Riemannian manifolds, we prove convergence as $t\downarrow 0$ of the rescaled pull-back metrics ${\mathrm{\Phi }}_t^{?}{g}_{L^2}$ in $L^2(X,\mathfrak{m})$ induced by ${\mathrm{\Phi }}_t$. Moreover we discuss the behavior of ${\mathrm{\Phi }}_t^{?}{g}_{L^2}$ with respect to measured Gromov-Hausdorff convergence and t. Applications include the quantitative $L^p$-convergence in the noncollapsed setting for all $p<\infty$, a result new even for closed Riemannian manifolds and Alexandrov spaces.     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Effect of a topical formulation containing Calophyllum brasiliense Camb. extract on cutaneous wound healing in rats

This study evaluated the wound healing effects of topical application of an emulsion containing the HPLC-standardised extract from Calophyllum brasiliense Cambess (Clusiaceae) leaves in rats. The macroscopic analysis demonstrated that the wounds treated with the C. brasiliense emulsion healed earlier than the wounds treated with emulsion base and Dersani®. The percentage of wound healing in the group treated with the C. brasiliense emulsion was significantly higher than in the other groups at 7 and 14 days. On day 14, the animals treated with the C. brasiliense emulsion exhibited a 90.67% reduction of the wound areas. The histological evaluation revealed that on day 21, the group treated with the C. brasiliense emulsion exhibited a significant increase in fibroblasts compared with the other groups. Thus, the C. brasiliense emulsion had healing properties in the topical treatment of wounds and accelerated the healing process.     

A general extension theorem for cohomology classes on non reduced analytic subspaces

The main purpose of this paper is to generalize the celebrated L~2 extension theorem of Ohsawa and Takegoshi in several directions: The holomorphic sections to extend are taken in a possibly singular hermitian line bundle, the subvariety from which the extension is performed may be non reduced, the ambient manifold is K¨ahler and holomorphically convex, but not necessarily compact.     

Upper limit of enhancement of boiling heat transfer in a narrow vertical rectangular channel due to passing bubbles

An experimental study has been made of saturated boiling heat transfer for water and R113 in a narrow vertical rectangular channel (2 mm space, 20 mm wide, and 200 mm long) at atmospheric pressure, in which the vertical heated surface (10 mm long and 20 mm wide) is located on one side at a position of 150 mm from its entrance and bubbles are forcibly passed through it at a designated period from 0.33 to 1.0 sec. The experiment shows that the heat transfer coefficients are increased by the bubble passing through the heated surface for the value of thermal diffusivity,a, times period, T₀, of the passing bubbles above about 6×10^–9 m² (a T ₀>6×10^–9 m²) while fora T ₀< 6×10^–9 m², the heat transfer coefficients become independent of the period and the effectiveness of the enhancement of the heat transfer owing to the passing bubble disappears.

---

Die obere Grenze der Verbesserung des Wärmeübergangs beim Sieden in einem vertikalen, rechteckigen Kanal infolge von aufsteigenden Blasen

Zusammenfassung Es wurden Experimente über den Wärmeübergang beim Sättigungssieden mit Wasser und R113 in einem engen, vertikalen, rechteckigen Kanal (2 mm Abstand, 20 mm Breite und 200 mm Länge) bei Umgebungsdruck durchgeführt, wobei die vertikale, beheizte Oberfläche (10 mm lang und 20 mm breit) auf der einen Seite in einem Abstand von 150 mm vom Eintritt angeordnet ist und die Blasen zwangsweise durch den Kanal sich mit einem Periodenabstand von 0,033 bis 1,0 s bewegen. Das Experiment zeigt, daß die Wärmeübergangskoeffizienten durch das Vorbeistreichen der Blasen an der beheizten Oberfläche verbessert werden, wenn das Produkt aus Temperaturleitfähigkeit,a, mal der Periode, T₀, der vorbeistreichenden Blasen größer als 6×10^–9 m² liegt, während unterhalb dieses Wertes der Wärmeübergangskoeffizient unabhängig von der Blasenperiode ist und die Effektivität der Wärmeübergangsverbesserung infolge der Blasenströmung verschwindet.

---

Nomenclature a thermal diffusivity of liquid - ¯h time-averaged heat transfer coefficient - q _w heat flux at wall - T ₀ period of passing bubble - T _w(t) temperature of heated surface - T _w amplitude of heated surface temperature Greek symbols thermal conductivity - thickness of liquid film