Elemental analysis of particulate matter in a metal workshop and of biological samples from exposed workers

During metal welding and cutting, large amounts of particulate matter (PM) are produced that might represent a significant health risk for the exposed workers. In the present pilot study, we performed an elemental analysis of fine PM collected in a metal workshop. Also, elemental analysis of the hair and nail samples collected from workers exposed to the workshop dust and control group was done. Concentrations of 15 elements in PM were measured with X‐Ray Fluorescence (XRF) and Particle Induced X‐ray Emission (PIXE), whereas inductively coupled plasma mass spectrometry (ICP‐MS) was used to determine 12 elements in hair and nail samples. Mean 8‐hr concentrations of PM_2.5, Fe, and Mn in the vicinity of welders were up to 1803, 860, and 30 μg/m³, respectively, whereas in the nearby city, daily PM_2.5 concentrations are on average 11 μg/m³. We found that several elements, especially Fe and Mn, had substantially higher concentrations in hair and nail samples of exposed workers than in the control group, which indicates the accumulation of metals in workers' tissues, although limit values were not exceeded.     

A visual uncertainty analytics approach for weather forecast similarity measurement based on fuzzy clustering

Journal of Visualization - Forecast calibration methods based on historical similar atmospheric state are effective means weather forecast accuracy. Conventional approaches search similar forecasts...     

Comparison of different methodologies for the computation of damped nonlinear normal modes and resonance prediction of systems with non-conservative nonlinearities

Nonlinear Dynamics - The nonlinear modes of a non-conservative nonlinear system are sometimes referred to as damped nonlinear normal modes (dNNMs). Because of the non-conservative...     

Development of an improved divergence‐free‐condition compensated coupled framework to solve flow problems with time‐varying geometries

In this article a coupled version of the improved divergence‐free‐condition compensated method will be proposed to simulate time‐varying geometries by direct forcing immersed boundary method. The proposed method can be seen as a quasi‐multi‐moment framework due to the fact that the momentum equations are discretized by both cell‐centered and cell‐face velocity. For simulating time‐varying geometries, a semi‐implicit iterative method is proposed for calculating the direct forcing terms. Treatments for suppressing spurious force oscillations, calculating drag/lift forces, and evaluating velocity and pressure for freshly cells will also be addressed. In order to show the applicability and accuracy, analytical as well as benchmark problems will be investigated by the present framework and compared with other numerical and experimental results.     

A note on statistical analysis of factor models of high dimension

Science China Mathematics - Linear factor models are familiar tools used in many fields. Several pioneering literatures established foundational theoretical results of the quasi-maximum likelihood...     

Effect of monomer hydrophilicity on ARGET–ATRP kinetics in aqueous mini-emulsion polymerization

Activators regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP)-based aqueous miniemulsion polymerization where the polymerization takes place in the stabilized monomer droplets is described. In this work, we compared styrene, n-butyl methacrylate (nBMA) and tert-butyl methacrylate (tBMA) and investigated the influence of their hydrophobicity on dispersity, molecular weight and particle stability based their partition coefficients (logP) (2.67, 2.23, and 1.86, respectively). Tetrabutylammonium bromide (TBAB) was used as a phase transfer agent for the controlled delivery of Cu²⁺-Br/tris(2-pyridylmethyl)amine (TPMA), a hydrophilic catalyst, into monomer droplets of varying hydrophobicity. The resulting dispersity and particle stability of each polymer is a function of its logP value, with the most hydrophobic monomer (styrene) displaying the narrowest dispersity and most control (Đ < 1.3), and the most hydrophilic polymer poly(tert-butyl methacrylate) (PtBMA) having reduced emulsion stability, determined by the observation of aggregate formation. Selected polymerization parameters, including effects of total ascorbic acid feed concentration and the monomer concentration and their effects on dispersity are reported. The controlled polymerizations of hydrophilic monomers using ARGET-ATRP in miniemulsion conditions and understanding the effect of monomer hydrophilicity on the emulsion stability will broaden the use of ARGET-ATRP in emulsion polymerization for the synthesis of polymer-grafted nanoparticles with hydrophilic corona.     

Fully Chemical Recyclable Poly(γ-butyrolactone)-based Copolymers with Tunable Structures and Properties

Chinese Journal of Polymer Science - The emerging chemical recyclable polymers, such as poly(γ-butyrolactone) (PGBL) and poly((R)-3,4-trans six-membered ring-fused GBL) (P((R)-M)), provide a...     

High-efficient surface tailoring via reverse atom transfer radical polymerization and reversible addition-fragmentation chain-transfer polymerization in an aqueous system initiated by a monocenter redox pair

The commonly used multi-center initiation methods always lead to the formation of quantities of homopolymer in the surface tailoring based on reverse atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. In this study, a monocenter redox pair constructed of silica bearing tert-butyl hydroperoxide groups and ascorbic acid (SiO₂-TBHP/AsAc) was applied to substitute the commonly used initiation method of R-supported RAFT grafting polymerization. All the propagating radicals were restricted on the surface of solid particles during the whole procedure theoretically, resulting in a higher grafting efficiency of 95.1% combined with the “controllable” feature at 10 h. This redox pair was also used to initiate the reverse ATRP in miniemulsion successfully with a grafting efficiency of 86.3% at 10 h. The grafting efficiency obtained under this monocenter initiation method was significantly higher than that of the frequently reported surface modification by reverse ATRP and RAFT polymerization. In addition, the high-efficient surface tailoring was traced and confirmed by nuclear magnetic resonance, Fourier transform infrared, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, and other analysis tests. The advantage of this monocenter redox pair will open a new avenue for the potential “high-efficient” surface tailoring of various materials.     

Dynamic mechanism of epileptic seizures generation and propagation after ischemic stroke

Nonlinear Dynamics - Epilepsy is the second largest neurological disease which seriously threatens human life and health. The one important reason of inducing epileptic seizures is ischemic stroke...