A visible light responsive molecularly imprinted photoelectrochemical sensor for the sensitive detection of BSA

Journal of Solid State Electrochemistry - A molecularly imprinted photoelectrochemical (PEC) cathodic sensor was developed for the detection of bovine serum albumin (BSA). The PEC sensor was...     

Study on the mechanism of catalytic synthesis of dimethyldichlorosilane by AlCl3/MIL‐53(Al)@γ‐Al2O3

Dimethyldichlorosilane, one of the most consumed organosilicon monomers in the industry, can be prepared in a highly efficient and environmentally friendly synthesis method of disproportionating methylchlorosilanes. However, the internal mechanism of the reaction remains unclear. In this paper, the mechanism catalyzed by AlCl₃/MIL‐53(Al) and AlCl₃/MIL‐53(Al)@γ‐Al₂O₃ catalysts was calculated at B3LYP/6‐311++G(3df, 2pd) level by using the density functional theory (DFT). The results showed that although the two catalysts had similar active structures, the catalytic effects were significantly different. The Lewis acid center on the surface of γ‐Al₂O₃ in the core‐shell catalyst is complementary to the classic Lewis acid AlCl₃ through the spatial superposition effect, which greatly improves the Lewis acid catalytic activity of AlCl₃/MIL‐53(Al)@γ‐Al₂O₃.     

Vertically aligned γ-AlOOH nanosheets on Al foils as flexible and reusable substrates for NH<Subscript>3</Subscript> adsorption

Vertically aligned γ-AlOOH nanosheets (NSs) have been successfully fabricated on flexible Al foils via a solvothermal route without morphology-directing agents. Three different reaction temperature (25, 80, and 120 ?C) and time (30 min, 45 min, and 24 h) are discussed for the growth period, which efficiently tune the density and size of the γ-AlOOH NSs. Meanwhile, the growth speed of the nanosheets confirms that dominant growth stage is seen in the initial 45 min. Furthermore, the interlayer of the γ-AlOOH NSs displays an average height of 140 nm and superhydrophilicity. By dynamic adsorption, the assynthesized γ-AlOOH NSs exhibit an outstanding NH₃ adsorption capacity of up to 146 mg/g and stably excellent regeneration for 5 cycles. The mechanism of NH₃ adsorption on the in-plane of the γ-AlOOH NSs is explained by the Lewis acid/base theory. The H-bond interactions among the NH₃ molecules and the edge groups (-OH) further improve the capture ability of the nanosheets.     

A nanocomposite consisting of plasma-polymerized propargylamine and graphene for use in DNA sensing

We report on a novel graphene-based nanoarchitecture modified with plasma-polymerized propargylamine (G-PpPG) and its application in electrochemical sensors for DNA. Films of G-PpPG were characterized by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The presence of graphene enhances the electrochemical activity of the films, and the high density of amino groups (deposited at a low plasma input power) on their surface assists in the immobilization of probe DNA on the water-swollen polymeric network. By contrast, the degree of hybridization of the total complementary target DNA to the probe DNA remains unchanged when G-PpPG nanofilms prepared at higher input power. No substantial non-specific adsorption of totally mismatched target DNA on the polymer films is observed because of the complete coverage of the probe DNA. The detection limit for total complementary target DNA is approximately 1.84 nmol?·?L^?1. The dynamic range extends from 0.1 to 1,000 nmol?·?L^?1. The new nanocomposite may also be used to immobilize other probe DNA sequences, and this makes the approach potentially applicable to the detection of other oligomers. Figure

Preparing the DNA sensor made from the graphene-based nanoarchitecture modified by using PpPG (G-PpPG) includes the following processes: (a) Modifying the Au electrode with the graphene nanosheet, (b) depositing the PpPG film onto the Au electrode coated with graphene, (c) immobilizing the probe DNA onto the G-PpPG film, and (d) hybridizing the MM0 target with the G-PpPG film immobilized with P1     

A Long‐Cycling Aqueous Zinc‐Ion Pouch Cell: NASICON‐Type Material and Surface Modification

Aqueous zinc‐ion batteries (ZIBs) have become the highest potential energy storage system for large‐scale applications owing to the high specific capacity, good safety and low cost. In this work, a NASICON‐type Na₃V₂(PO₄)₃ cathode modified by a uniform carbon layer (NVP/C) has been synthesized via a facile solid‐state method and exhibited significantly improved electrochemical performance when working in an aqueous ZIB. Specifically, the NVP/C cathode shows an excellent rate capacity (e. g., 48 mAh g^?1 at 1.0 A g^?1). Good cycle stability is also achieved (e. g., showing a capacity retention of 88% after 2000 cycles at 1.0 A g^?1). Furthermore, the Zn²⁺ (de)intercalation mechanism in the NVP cathode has been determined by various ex‐situ techniques. In addition, a Zn||NVP/C pouch cell has been assembled, delivering a high capacity of 89 mAhg^?1 at 0.2 A g^?1 and exhibiting a superior long cycling stability.     

石墨烯纳米孔的制备及λ-DNA穿孔初步研究

纳米孔测序是有可能实现"$1,000 Genome"目标的技术之一.近年来,研究较多的纳米孔有蛋白质纳米孔和硅基材料的固态纳米孔.蛋白孔寿命比较短,而基于硅基底的固态纳米孔深度显著超过单链DNA相邻碱基的间距,所以,无法实现DNA的单个碱基的分辨.作者用聚焦离子束先制造氮化硅基底,并在该基底上铺设石墨烯,再用聚焦电子束刻蚀石墨烯,获得直径10 nm以下的纳米孔,初步分析了DNA穿越纳米孔时产生的电信号及穿孔噪音,向单层石墨烯纳米孔测序DNA迈出了一步.     

A facial approach to fabricate superhydrophobic aluminum surface

A facial chemical etching method was developed for fabricating superhydrophobic aluminum surfaces. The resultant surfaces were characterized by scanning electron microscopy, water contact angle (WCA) measurement, and optical methods. The surfaces of the modified aluminum substrates exhibit superhydrophobicity, with a WCA of 154.8° ± 1.6° and a water sliding angle of about 5°. The etched surfaces have binary structure consisting of the irregular microscale plateaus and caves in which there are the nanoscale block‐like convexes and hollows. The superhydrophobicity of aluminum substrates occurs only in some structures in which the plateaus and caves are appropriately ordered. The resulted surfaces have good self‐cleaning properties. The results demonstrate that it is possible to construct superhydrophobic surface on hydrophilic substrates by tailoring the surface structure to providing more spaces to trap air. Copyright © 2009 John Wiley & Sons, Ltd.     

A New Photochemical Reaction of Sulfonic Acid Esters

Abstract

In 1968 Zen and coworkers reported that thep-tolylsulfonyl group could be removed from carbohydrate systems by photochemical reaction (eq 1).¹ Since then other investigators have used this deprotection process in carbohydrate synthesis.^2-10 Mechanistic studies^11-16 have shown that tosylate photolysis is promoted by compounds (e.g., triethylamine) that donate an electron to an excitedp-toluenesulfonate to generate a radical anion (1). This intermediate then fragments to form the anion of the deprotected sugar (Scheme 1). Since generating a radical anion is the central element in this photochemical process, structural changes that impact radical anion formation should influence the reaction. Replacing the p - tolylsulfonyl group with the pentafluorophenylsulfonyl group generates a more stable radical anion (2) because the electronegative fluorine atoms can help stabilize the negative charge. Since we have a continuing interest in the photochemistry of sulfonic acid esters, we synthesized the pentafluorobenzenesulfonates (pentaflates) 3-6 and studied their photochemistry under electron transfer conditions.     

Highly sensitive lable-free electrochemical aptasensor for thrombin detection with cobalt hexacyanoferrate as the electrochemical probe

A highly sensitive label-free electrochemical aptasensor has been constructed for the electrochemical detection of thrombin (TB), where two layers of cobalt hexacyanoferrate (CoHCF) redox probes sandwiched with carbon nanotubes–Nafion were directly immobilized on the electrode surface by electrodeposition. Through the strong interaction between CN^? (CoHCF) and gold nanoparticles (GNPs), GNPs were assembled on the CoHCF-modified electrode for the immobilization of thiolated thrombin aptamers (TBA). In the presence of target TB, TBA on the electrode surface could catch TB to form TBA–TB complex, which made a barrier for the electron transfer, resulting in a greater decrease in CoHCF redox probe signals. Thus, the proposed aptasensor showed a high sensitivity and a much wider linearity to TB in the range of 1.0 pg/mL?～?1.0 μg/mL with a detection limit of 0.28 pg/mL.     

The finite element method based on interpolating with wavelet basis function

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｐｒｏｂｌｅｍｓｗｉｔｈｌａｒｇｅｇｒａｄｉｅｎｔａｒｅｃｏｍｍｏｎｉｎｐｒａｃｔｉｃａｌｅｎｇｉｎｅｅｒｉｎｇｆｉｅｌｄｓ,ｅ．ｇ．ｉｎｍａｔｅｒｉａｌｌｏｃａｌｉｚａｔｉｏｎ,ｗｉｔｈｉｎｔｈｅｌｏｃａｌｉｚａｔｉｏ...