Modeling and design of a tuned liquid damper using triangular-bottom tank by a concentrated mass model

Nonlinear Dynamics - Rectangular flat-bottom liquid tanks known as tuned liquid dampers (TLDs) are often used as passive mechanical dampers. Sloped- and triangular-bottom TLDs have been reported to...     

Improvement in flow-sheet of extraction chromatography for trivalent minor actinides recovery

Journal of Radioanalytical and Nuclear Chemistry - Extraction chromatography flow-sheet employing octyl(phenyl)-N,N-diisobutylcarbonoylmethylphosphine oxide and bis(2-ethylhexyl) hydrogen phosphate...     

Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.     

Fabricating Dual-Atom Iron Catalysts for Efficient Oxygen Evolution Reaction: A Heteroatom Modulator Approach

Understanding the thermal aggregation behavior of metal atoms is important for the synthesis of supported metal clusters. Here, derived from a metal–organic framework encapsulating a trinuclear Fe^III₂Fe^II complex (denoted as Fe₃) within the channels, a well-defined nitrogen-doped carbon layer is fabricated as an ideal support for stabilizing the generated iron nanoclusters. Atomic replacement of Fe^II by other metal(II) ions (e.g., Zn^II/Co^II) via synthesizing isostructural trinuclear-complex precursors (Fe₂Zn/Fe₂Co), namely the “heteroatom modulator approach”, is inhibiting the aggregation of Fe atoms toward nanoclusters with formation of a stable iron dimer in an optimal metal–nitrogen moiety, clearly identified by direct transmission electron microscopy and X-ray absorption fine structure analysis. The supported iron dimer, serving as cooperative metal–metal site, acts as efficient oxygen evolution catalyst. Our findings offer an atomic insight to guide the future design of ultrasmall metal clusters bearing outstanding catalytic capabilities.     

Developments of nano-polycrystalline diamond anvil cells for neutron diffraction experiments

ABSTRACT

A new high pressure cell for neutron diffraction experiments using nano-polycrystalline anvils is presented. The cell design, off-line pressure generation tests and a gas-loading procedure for this cell are described. The performance is illustrated by powder neutron diffraction patterns of ice VII to ～82?GPa. We also demonstrate the feasibility of single crystal neutron diffraction experiments of Fe₃O₄ at ambient conditions using this cell and discuss the current limitation and future developments.     

Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

One‐Handed Single Helicates of Dinickel(II) Benzenehexapyrrole‐α,ω‐diimine with an Amine Chiral Source

Benzenehexapyrrole‐α,ω‐dialdehyde, composed of a pair of formyltripyrrole units with a 1,3‐phenylene linker, was metallated to give dinuclear single‐stranded helicates. X‐ray studies of the bis‐nickel(II) complex showed a helical C₂ form with a pair of helical–metal coordination planes of a 3N+O donor set. The terminal aldehyde was readily converted into the imine by optically active amines, whereby helix‐sense bias was induced. Bis‐nickel(II) and bis‐palladium(II) complexes of the benzenehexapyrrole‐α,ω‐diimines were studied to show that an enantiomer pair of the helical C₂ form are interchanged by slow flipping of each coordination plane and fast rotation around the C(benzene)?C(pyrrole) bond. The helical screw in the bis‐nickel(II) complexes was biased to one side in more than 95 % diastereoselectivity, which was achieved by using a variety of optically active amines, such as (R)‐1‐cyclohexylethylamine, (S)‐1‐ phenylethylamine, L ‐Phe(OEt) (Phe=phenylalanine), and (R)‐valinol. The nickel complexes showed much better diastereoselectivity than the corresponding palladium complexes.     

Conformational Changes and Redox Properties of Bimetallic Single Helicates of Hexapyrrole-α,ω-dicarbaldehydes

The hexapyrrole-α,ω-dicarbaldehydes 1 a and 1 b were metallated with Cu^II, Ni^II, and Pd^II to give bimetallic complexes where a pair of 3 N+O four-coordinate metal planes are helically distorted and the central 2,2′-bipyrrole subunit adopts a cis or trans conformation. X-ray crystallographic analysis of the bisCu complex revealed a closed form with a cis-2,2′-bipyrrole subunit and an open form with a trans-2,2′-bipyrrole subunit. The bisPd complexes took a closed form both in the solid state and in solution. They are regarded as single helicates of two turns and the energy barrier for the interchange between an M helix and a P helix was remarkably influenced by the bulky 3,3′-substituent of the central 2,2′-bipyrrole subunit. Although the bisNi complexes adopt a closed form in the solid state, they exist as a homohelical open C₂-symmetric form or a heterohelical open C_i-symmetric form in solution. A theoretical study suggested that the closed form of 1 a Pd was stabilized by the Pd–Pd interaction. Compound 1 a Pd was reversibly oxidized by one electron at 0.14 V versus ferrocene/ferrocenium (Fc/Fc⁺) and this oxidized species showed Vis/NIR absorption bands at λ=767 and 1408 nm.     

Microstructural stability and age-hardening behavior of Re-added dual two-phase Ni3Al and Ni3V intermetallic alloys

The effect of Re addition on the microstructure and hardening behaviour of the dual two-phase Ni₃Al (L1₂) and Ni₃V (D0₂₂) intermetallic alloy was investigated by scanning electron microscopy, transmission electron microscopy and Vickers hardness test. The two-phase eutectoid microstructure accompanying the Re-rich precipitates were observed in the channel region of the alloys in which Re substituted for Ni but not in those in which Re substituted for Al and V. The concomitant addition of Nb (or Ta) with Re more stabilized the two-phase eutectoid microstructure and consequently more induced the fine precipitates in the channel region. The annealing at temperatures below the eutectoid temperature was necessary to induce the fine precipitates in the channel region and thereby result in the precipitation hardening. The fine precipitation in the channel region and related hardening was attributed to the alloying feature so that Re is soluble in the A1 (fcc) phase at high temperatures and becomes less soluble in the two intermetallic phases decomposed from the A1 phase at low temperatures.     

pH-Sensitive Oscillatory Motion of a Urease Motor on the Urea Aqueous Phase

A self-propelled object coupled with an enzyme reaction between urease and urea was investigated at the air/aqueous interface. A plastic object that was fixed to a urease-immobilized filter paper was used as a self-propelled object, termed a urease motor, placed on an aqueous urea solution. The driving force of the urease motor is the difference in the surface tension around the object. Oscillatory motion or no motion was triggered depending on the initial pH of the urea solution. Both the frequency and maximum speed of the oscillatory motion varied depending on the initial pH of the water phase. The mechanisms underlying the oscillatory motion and no motion were discussed in relation to the bell-shaped enzyme activity of urease in the enzyme reaction and the surface tension around the urease motor.