1,3,5-苯三甲醛的合成与应用研究进展

介绍了1,3,5-苯三甲醛的合成与应用。在1,3,5-苯三甲醛的众多合成方法中,以氧化还原方法最常见,此外水解、聚合等方法各具优点,在满足高产率和绿色化学方面有了更多选择。1,3,5-苯三甲醛是一种具有广泛开发应用前景的化学合成中间体,以其为原料合成的大分子物质具有优异的化学、物理特性和生物活性,在催化、光电、抗病毒,以及分子吸附和药物包材等方面具有广泛的应用。     

Synthesis and Chromatographic Evaluation of Perfluorooctyl Stationary Phase for Separation of Basic Compounds

Fluorinated stationary phases provide unique separation effect on basic compounds, due to the fluorine atoms, and pentafluorophenyl stationary phases (PFPs) are the most widely used. Considering that some fluoroalkyls have higher fluorine contents than PFPs do, it is speculated that fluoroalkyl stationary phases should have potential new applications. Herein, we synthesized a silica-based stationary phase bonding perfluoroctyl (FC8) proved by characterization through elemental analysis and solid-state ¹³C cross-polarization/magic-anglespinning nuclear magnetic resonance. The chromatographic behavior of the stationary phase was evaluated with test compounds. In addition, to further study the applicability of FC8 materials, Corydalis decumbens (Thunb.) Pers. fraction, considered as a challenging medicine on reversed-phase chromatography columns, was chosen as a test sample. Results demonstrated that the FC8 stationary phase had better and more satisfactory separation performance than the PFP stationary phase on basic compounds.

     

Modeling,nonlinear dynamic analysis and control of fractional PMSG of wind turbine

This study aims to reveal the laws of the relationship between fractional-order system and integer-order system. Meanwhile, delayed feedback control is introduced to control the fractional-order PMSG (permanent magnet synchronous generator) model of a wind turbine. First, the fractional-order mathematical model of PMSG is established. Next, numerical simulations under different system orders are given and the system dynamic behaviors are analyzed in detail. Then, the delayed feedback control method is introduced to control the fractional-order PMSG and the control results when different parameters vary are analyzed. Complex dynamics are presented and some interesting phenomena are discovered. It is found that the system order influences the dynamics of the system in many aspects such as chaos pattern, bifurcation behavior, period window, shape and size of strange attractor. The delayed time, feedback gain, feedback limitation, system order can obviously influence the control result except the initial state of the system. Moreover, the feedback limitation has a minimum to successfully control the system to stable states and the system order also has a maximum to do so.     

Evaluation of in vitro antioxidant activities of soyasaponins from soy hypocotyls in human HepG2 cell line

Soyasaponins were shown to have a wide range of biological activities in previous studies; however, the activities of their monomeric compounds are unclear. The aim of this study was to evaluate the in vitro antioxidant activities of soyasaponins in HepG2 cells. Four soyasaponins were isolated from soy hypocotyls and identified as soyasaponin Aa, Ab, Ba, and Bb. The protective effects of these soyasaponins against production of hydrogen peroxide-induced reactive oxygen species in cells were investigated. The cellular antioxidant activity of soyasaponins was found to be in a dose-dependent manner at concentrations ranging between 25 and 400 μg/mL in 24 h. Finally, based on cell morphology observations, group A soyasaponins showed better cellular antioxidant activity and anti-oxidative enzyme activity than group B ones, with an optimal concentration of 100 μg/mL.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

石墨相氮化碳可见光下活化过一硫酸盐氧化降解光惰性邻苯二甲酸二甲酯的机理研究（英文）

近几年过一硫酸盐(PMS)活化技术备受关注,其中利用太阳能活化PMS具有可持续和环保的优势,但PMS本身不吸收可见光.因此,本文提出利用具有可见光响应的石墨相氮化碳(g-C3N4)激发产生光电子进而活化PMS.首先利用三聚氰胺前驱体通过热缩聚法制备g-C3N4,通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见光漫反射(UV-Vis)、荧光光谱(PL)、透射电镜(TEM)、N2吸附脱附测试(BET)、电化学等一系列方法对g-C3N4进行表征,研究其表面性质及光学性能.结果显示, g-C3N4具有典型的片层结构和可见光活性,禁带宽度为2.7 e V.本文选取光惰性的内分泌干扰物邻苯二甲酸二甲酯(DMP)为目标污染物,系统地研究了其降解动力学和降解机理.研究发现,在短波紫外光(254和300nm)照射下,直接光解和·OH参与的反应机理能实现DMP的光降解,而在可见光照射下g-C3N4介导的光催化过程不能使DMP分解;但当添加PMS时,体系主导自由基由·O2–转化为SO4·–和·OH,从而实现DMP的有效降解和矿化.研究还发现,高浓度的PMS和高剂量的g-C3N4均可以提高PMS的活化量和相应的DMP降解效率,但提高催化剂剂量的方式能更充分的利用PMS.尽管高浓度的DMP阻碍了PMS和光催化剂g-C3N4的有效接触,但可以提高PMS的利用率.当p H低于零电荷点(5.4)时, DMP的降解效率较高.此外,使用两种淬灭剂(乙醇和叔丁醇)与DMP进行竞争性实验,结合电子自旋共振检测,表明SO4·–和·OH都是体系主要的自由基.此外,还对g-C3N4的可持续性能进行考察,四次循环实验结果显示,该催化剂具有良好的可重复利用性.对DMP降解进行总有机碳测定,发现降低了19%.最后,利用液相色谱质谱联用对DMP降解产物进行定性定量分析,发现DMP主要通过SO4·–和·OH对苯环的攻击以及脂肪族链的氧化断键这两种途径进行降解.综上可见,利用可见光激发g-C3N4产生的光电子能有效活化PMS降解顽固型有机污染物,可为实现太阳能活化PMS技术提供有力的技术参考.     

Growth and annealing of zinc-blende CdSe thin films on GaAs (0 0 1) by molecular beam epitaxy

CdSe thin films have been grown on GaAs (0 0 1) substrates by molecular beam epitaxy (MBE). The effects of substrate temperature and annealing treatment on the structural properties of CdSe layers were investigated. The growth rate slightly decreases due to the accelerated desorption of Cd from CdSe surface with an increase in the temperature. The sample grown at 260 °C shows a polycrystalline structure with rough surface. As the temperature increases over 300 °C, crystalline CdSe (0 0 1) epilayers with zinc-blende structure are achieved and the structural quality is improved remarkably. The epilayer grown at 340 °C displays the narrowest full-width at half-maximum (FWHM) from (0 0 4) reflection in double-crystal X-ray rocking curve (DCXRC) and the smallest root-mean-square (RMS) roughness of 0.816 nm. Additionally, samples fabricated at 320 °C were annealed in air for 30 min to study the films’ thermal stability. X-ray diffraction (XRD) results indicate that the zinc-blende structure remains unchanged when the annealing temperature is elevated to 460 °C, meaning a good thermal stability of the cubic CdSe epilayers.     

Copper‐Catalyzed Three‐Component Azidotrifluoromethylation/Difunctionalization of Alkenes

A novel three‐component strategy for the azidotrifluoromethylation of alkenes has been presented here. The reaction proceeded smoothly under gentle temperature and gave the bifunctional olefins in high yields. Furthermore, 1,3‐dipolar reactions between azide‐containing products and phenylacetylene revealed great potential in molecular modification by using this method.     

氨酯化合物对聚碳酸1,2-丙二酯的同时增韧和增强研究

采用非异氰酸酯路线合成了1,6-六亚甲基二氨基甲酸羟异丙酯(BPU),分子量为320.利用熔融共混方法制备了聚碳酸1,2-丙二酯(PPC)/BPU共混物.研究发现BPU与PPC间有较好的相容性,随着BPU含量的增加,共混体系的起始热分解温度(Td.5％)可分别增加24～33℃,共混物韧性也显著提高,断裂伸长率最大可增至...     

Reversible Photoisomerization from Borepin to Boratanorcaradiene and Double Aryl Migration from Boron to Carbon

B(npy)Ar₂ (npy=2‐(naphthalen‐1‐yl)pyridine) compounds bearing various nonbulky aryl groups undergo a clean and sequential two‐step photoisomerization in which two aryl substituents on boron migrate to a carbon atom of the naphthyl moiety. The second isomerization step is the first example of a reversible photoisoermization between a borepin and a borirane. Both steric and electronic factors have been found to have a great impact on this photoreactivity. Furthermore, the borirane isomer reacts with oxygen, forming a rare oxaborepin dimer.