Enhanced output voltage of nano energy harvester with diverse textiles

Abstract

We demonstrate the electrical properties of nano energy harvesters (NEHs) with various textiles for smart textiles that can be applied to the next generation wearable electronics. Output voltages and currents of NEHs with various fabrics, such as a cotton, rayon and wool that have different triboelectricity were measured. Cotton, rayon and wool shows the maximum output voltages of 1.250, 3.313 and 4.063 V, respectively. In addition, output currents of those textiles were 0.75, 4.4, 1.063 μA, respectively. Wool, in particular, which has the highest triboelectricity of 350 V exhibits the highest output voltage.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

MXene-based composite electrodes for efficient electrochemical sensing of glucose by non-enzymatic method

A recently discovered 2D transition titanium metal carbides also called as MXenes (Ti₃C₂T_x)-based nanocomposite was prepared with Cu₂O through wet precipitation technique, and these materials were further developed as the electrode for sensing glucose by chronoamperometry technique. The prepared MXene-Cu₂O (Ti₃C₂T_x-Cu₂O) nanocomposite was characterized by XRD, FTIR, UV–Vis spectroscopy, FE-SEM, EDAX, and Raman spectroscopy. Morphological studies of the composites revealed that the micro-octahedral shape of Cu₂O is distributed on the surface of MXene with size larger than bare Cu₂O. Further, the prepared composite material was fabricated as a sensing probe, and the electrochemical activities were examined by cyclic voltammetric analysis (CV) and chronoamperometric (CA) methods. From the CV and CA investigation, the current response was higher for the composite than the bare material (Cu₂O & MXene) in the presence of glucose. The amperometric investigation of MXene-Cu₂O composite for the detection of glucose shows a broad linear range (0.01–30 mM) with a sensitivity of 11.061/μAmM cm^?2 and a detection limit of 2.83 μM. Further, the fabricated sensor exhibits good selectivity with interfering species like NaCl, fructose, sucrose, urea, ascorbic acid, lactose, short response time, stability, good reproducibility, and compatibility with human serum sample. From the investigation, the prepared MXene-Cu₂O composite is a good candidate for the direct detection of glucose molecules and is also well suitable for clinical diagnosis.     

Cover Feature: How Many O-Donor Groups in Enterobactin Does It Take to Bind a Metal Cation? (Chem. Eur. J. 28/2019)

The E. coli siderophore enterobactin, the strongest Fe^III chelator known to date, forms hexacoordinate complexes with Si^IV, Ge^IV, and Ti^IV. Synthetic protocols have been developed to prepare non-symmetric enterobactin analogues with varying denticities. Various benzoic acid residues were coupled to the macrocyclic lactone to afford a diverse library of ligands. These enterobactin analogues were bound to Si^IV, Ge^IV, and Ti^IV, and the complexes were investigated through experimental and computational techniques. The binding behavior of the synthesized chelators enabled assessment of the contribution of each of the phenolic hydroxy groups in enterobactin to metal-ion complexation. It was found that at least four O-donors are needed for enterobactin derivatives to act as metal binders. Density functional theory calculations indicate that the strong binding behavior of enterobactin can be ascribed to a diminished translational entropy penalty, a common feature of the chelate effect, coupled with the structural arrangement of the three catechol moieties, which allows the triseryl base to be installed without distorting the preferred local metal-binding geometry of the catecholate ligands.     

Efficient preparation of UCl3 by ZnCl2 mediated chlorination

Journal of Radioanalytical and Nuclear Chemistry - U chlorination is demonstrated using electrochemical and chemical reactions with ZnCl2 in LiCl–KCl molten salts. Voltammetric studies...     

Novel quantum description of time-dependent molecular interactions obeying a generalized non-central potential

Nonlinear Dynamics - Quantum features of time-dependent molecular interactions are investigated by introducing a time-varying Hamiltonian that involves a generalized non-central potential....