A structurally stable, 3d-4f heterometallic coordination polymer has been solvothermally synthesised and evaluated for its accomplished materials properties. The light absorption activity in the visible band was higher for unique Ce-Fe MOF than that of the homometallic Ce-MOF or Fe- MOF. The intimate overlap of two different metal clusters in heterometallic environmental induced the formation of low line conduction orbital, which ultimately lowered the transition energy. The heterometallic acquired an additional sensitisation from a Fe-μ3-oxo cluster that had vibrantly enhanced the light uptake activity. The vacancy created in the 6s, 5d orbital of Ce in Ce-Fe MOF contributed to the photo-excitation of electrons and reduced the recombination time. This distinct intramolecular arrangement assisted the exciton trapping characteristic. Also, the presence of multiple metal cores in the framework aided to confine the increased number of excitons for a redox reaction. The solar photocatalysis study with acetaminophen revealed these improved materialistic features by degrading it 94.6% with a rate constant of 0.0137 min−1. The recycle studies confirmed the robust stability of the synthesised MOF. 相似文献
Co–Fe bimetallic nanoparticles-affixed polyvinylidene fluoride-co-hexafluoropropylene (PVdF-HFP) nanofiber membrane is fabricated using the electrospinning and chemical reduction techniques. The semicrystalline polymeric backbone decorated with the highly crystalline Co–Fe bimetallic nanoparticles enunciates the mechanical integrity, while the incessant and swift electron mobility is articulated with the consistent dissemination of bimetallic nanoparticles on the intersected and multi-layered polymeric nanofibers. The diffusion and adsorption of glucose are expedited in the extended cavities and porosities of as-formulated polymeric nanofibers, maximizing the glucose utilization efficacy, while the uniformly implanted Co4+/Fe3+ active centers on PVdF-HFP nanofibers maximize the electrocatalytic activity toward glucose oxidation under alkaline regimes. Thus, the combinative sorts including nanofiber and nanocomposite strategies of PVdF-HFP/Co–Fe membrane assimilate the enzyme-less electrochemical glucose detection concerts of high sensitivity (375.01 μA mM?1 cm?2), low limit of detection (0.65 μm), and wide linear range (0.001 to 8 mM), outfitting the erstwhile enzyme-less glucose detection reports. Additionally, the endowments of high selectivity and real sample glucose-sensing analyses of PVdF-HFP/Co–Fe along with the binder-less and free-standing characteristics construct the state-of-the-art paradigm for the evolution of affordable enzyme-less electrochemical glucose sensors.
A recently discovered 2D transition titanium metal carbides also called as MXenes (Ti3C2Tx)-based nanocomposite was prepared with Cu2O through wet precipitation technique, and these materials were further developed as the electrode for sensing glucose by chronoamperometry technique. The prepared MXene-Cu2O (Ti3C2Tx-Cu2O) nanocomposite was characterized by XRD, FTIR, UV–Vis spectroscopy, FE-SEM, EDAX, and Raman spectroscopy. Morphological studies of the composites revealed that the micro-octahedral shape of Cu2O is distributed on the surface of MXene with size larger than bare Cu2O. Further, the prepared composite material was fabricated as a sensing probe, and the electrochemical activities were examined by cyclic voltammetric analysis (CV) and chronoamperometric (CA) methods. From the CV and CA investigation, the current response was higher for the composite than the bare material (Cu2O & MXene) in the presence of glucose. The amperometric investigation of MXene-Cu2O composite for the detection of glucose shows a broad linear range (0.01–30 mM) with a sensitivity of 11.061/μAmM cm?2 and a detection limit of 2.83 μM. Further, the fabricated sensor exhibits good selectivity with interfering species like NaCl, fructose, sucrose, urea, ascorbic acid, lactose, short response time, stability, good reproducibility, and compatibility with human serum sample. From the investigation, the prepared MXene-Cu2O composite is a good candidate for the direct detection of glucose molecules and is also well suitable for clinical diagnosis. 相似文献
This study aimed to investigate the antioxidant, anti-inflammatory and biosorption properties of starch nanocrystals (SNC). The characterization of synthesized SNC was done using various analytical techniques like microscopic and spectroscopic analysis. The antioxidant property was determined using DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and metal ion chelating assay. SNC showed the highest scavenging activity of 70.03?±?0.74% at 100 µg/mL concentration. Protein denaturation assay and proteinase inhibitory assay depicted the anti-inflammatory property of SNC. The results revealed that the maximum inhibition activity was found at 100 µg/mL with 72.71% inhibition. The maximum removal efficiency was found to be 83.42% at pH 2.0 with 0.15 g biosorbent. As the pH increases, biosorption capacity of SNC were reduced from 8.17 to 6.30 mg/g and the efficiency of the dye removal was decreased from 80.95 to 36.01%. The shape of synthesized SNC was spherical nanoplatelets and it shows agglomeration. The Langmuir isotherm model is best suited for the biosorption experiments with the R2 value of 0.986. SNC were subjected to cytotoxic and phytotoxic evaluation. Cell viability and phytotoxic assays proves the non-toxic nature of the SNC.
We have designed photodetectors and UV field emitters based on a combination of ZnO nanowires/nanorods (ZNRs) and bilayer diamond films in a metal–semiconductor–metal (MSM) structure. The ZNRs were fabricated on different diamond films and systematic investigations showed an ultra‐high photoconductive response from ZNRs prepared on ultrananocrystalline diamond (UNCD) operating at a lower voltage of 2 V. We found that the ZNRs/UNCD photodetector (PD) has improved field emission properties and a reduced turn‐on field of 2.9 V μm?1 with the highest electron field emission (EFE) by simply illuminating the sample with ultraviolet (UV) light. The photoresponse (Iphoto/Idark) behavior of the ZNRs/UNCD PD exhibits a much higher photoresponse (912) than bare ZNRs (229), ZNRs/nanocrystalline diamond (NCD; 518), and ZNRs/microcrystalline diamond (MCD; 325) under illumination at λ=365 nm. A photodetector with UNCD films offers superior stability and a longer lifetime compared with carbon materials and bare ZNRs. The lifetime stability of the ZNRs/UNCD‐based device is about 410 min, which is markedly superior to devices that use bare ZNRs (92 min). The ZNRs/UNCD PD possesses excellent photoresponse properties with improved lifetime and stability; in addition, ZNRs/UNCD‐based UV emitters have great potential for applications such as cathodes in flat‐panel displays and microplasma display devices. 相似文献
The stereochemical preference of the biocatalyst, Candida parapsilosis ATCC 7330, was investigated with respect to the E/Z configuration in the deracemization and the asymmetric reduction of aryl secondary alcohols and prochiral ketones, respectively. The biocatalyst preferred the E-isomers over Z-isomers as substrates as evidenced from the experimental results of >99% ee and up to 86% isolated yield for E-secondary alcohols. The synthesis of enantiomerically pure E-4-phenylbut-3-ene-1,2-diol (ee >99%, isolated yield 86%) by whole cell mediated deracemization is reported here for the first time. The geometric preference of the enzymes was confirmed by using the cell free extract of this biocatalyst. Mechanistic insights using in silico studies showed that the E-isomers when located in the active site are favourably placed with respect to the catalytic triad (Ser-Tyr-Lys) for hydride transfer from NADPH. 相似文献
Effects of substituents and dopants on the structure–property relationships of poly(aniline) (PANI)-type homopolymers are analyzed. The gravimetric method was used for the estimation of rate of polymerization (Rp). FTIR spectroscopy was used for the calculation of relative intensities (RI) of benzenoid (RI[B/CH]), quinonoid (RI[Q/CH]), and their internal conversion (RI[B/Q]). Thermogravimetric analysis (TGA) characterized the thermal stability of PANIs. A standard four probe method was employed for the conductivity measurements. The results are analyzed and critically compared. 相似文献
The ligand salt, Me6[14]diene·2HClO4 (L·2HClO4) was prepared by condensation of acetone and ethylene diamine in the presence of perchloric acid. On reduction of this diene ligand salt, L·2HClO4 with sodium borohydride, the two isomeric ligands, ‘tet-a’ and ‘tet-b’ were produced. The ligands, on reaction with ZnX2 (X=Cl, ClO4, NO3 or CH3COO) and ZnSO4 produced the corresponding complexes. These complexes have been characterized on the basis of elemental analyses; IR, UV–Vis and 1H-NMR spectroscopies; magnetic and conductance data. Based on these data, all of the complexes of the diene ligand L, as well as the perchlorate complexes of all of the ligands attained a square-pyramidal arrangement, whereas the complexes of ‘tet-a’ and ‘tet-b’, with X=NO3, Cl or CH3COO and with ZnSO4 salt, were octahedral. Moreover, all complexes were monometallic except the nitrato complex, [(ZnL)2(µ-NO3)](ClO4)3 which is bimetallic. The structure of [(ZnL)2(µ-NO3)](ClO4)3 has been confirmed by X-ray crystallography. In this complex the zinc centres lie within a N4O donor set, with the four nitrogen donors from L and one of the oxygen atom stemming from the bridging NO3. The complexes show different electrolytic behavior in different solvents. The antibacterial activities of the ligands and complexes towards different phytopathogenic bacteria have been investigated. 相似文献