电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

Highly insulating alkane rings with destructive σ-interference

Science China Chemistry - Destructive quantum interference (DQI) provides a unique approach to controlling the leakage current in the OFF state of molecular devices. However, the DQI in...     

High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

Sobolev-Lorentz范数约束下的次临界型Adams不等式

本文在Sobolev-Lorentz空间W²L^2,q(R⁴)的范数约束下得到了一个最佳的二阶次临界型Adams不等式.进一步,当次临界指标逼近最佳常数时,得到了Adams泛函的上、下界的估计.本文主要采用了Lam和Lu[A new approach to sharp MoserTrudinger and Adams type inequalities:a rearrangement-free argument,J.Diff Equ.,2013,255(3):298-325]的分割水平集方法.     

基于深度学习的离轴菲涅耳数字全息非线性重构

针对离轴菲涅耳数字全息图,提出基于深度学习的单幅数字全息非线性重构方法 .采用经典的菲涅耳衍射积分模拟数字全息成像以供给网络训练所需样本,利用深度卷积残差神经网络通过学习数字全息图与相关物像之间的非线性数学映射关系实现全息图的物像重构.数值模拟表明,与传统的频率滤波和四步相移技术实现菲涅耳数字全息重构相比,本文提出的方法可直接消除零级像及孪生像,无需条纹物项抽取预处理步骤,且重构的物像具有较高的质量,针对相同记录参考光下不同衍射距离所生成的测试集亦具有较强的稳健性.     

AlGaN基宽禁带半导体光电材料与器件

AlGaN基材料是带隙可调的直接带隙宽禁带半导体材料,是制备紫外(UV)光电子器件的理想材料.经过数十年的研究,目前已经在异质衬底外延生长AlGaN基材料、高效掺杂等方面取得了巨大进展.以此为基础,AlGaN基紫外光电器件制备领域也得到长足发展.在本综述中,主要介绍了高质量AlGaN基材料的MOCVD外延生长方法、掺杂方法以及近年来在紫外发光、紫外探测器件方面取得的进展.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。     

Simultaneous determination of cinnamaldehyde and its metabolite in rat tissues by gas chromatography–mass spectrometry

Cinnamaldehyde (CA), an active ingredient isolated from the traditional Chinese medicine Cortex Cinnamomi, has a wide range of bioactivities. To clarify the distribution characteristics of CA, a selective and sensitive method utilizing gas chromatography–mass spetrometry was initially developed for simultaneously determining the concentration of CA and its metabolite cinnamyl alcohol in rat tissues. Selected ion masses of m/z 131, 105 and 92 were chosen, and separation of the analytes was performed on a DB‐5 ms (30 m × 0.25 mm, 0.25 µm, thickness) capillary column by gas chromatography–mass spectrometry. The calibration curves demonstrated good linearity and reproducibility over the range of 20–2000 and 20–4000 ng/mL for various tissue samples. Recoveries ranged from 86.8 to 107.5%, while intra‐ and interday relative standard deviations were all <11.3%. The analysis method was successfully applied in tissue distribution studies for CA and cinnamyl alcohol. As CA and cinnamyl alcohol may inter‐convert to one another, simultaneous determination of both analytes provides a comparative and accurate data for tissue study. The concentrations of CA and cinnamyl alcohol remaining in spleen were the highest among the main organs, including heart, liver, spleen, lung, kidney and brain. In addition, there was no long‐term accumulation of CA in rat tissues. Copyright © 2014 John Wiley & Sons, Ltd.     

硫源和六元瓜环对硫化镉性质的影响

以硫代硫酸钠和硫脲为硫源,氯化镉为镉源,六元瓜环(Q[6])为修饰剂,采用水热法制备Q[6]/CdS复合光催化剂.利用傅里叶变换红外光谱、X射线粉末衍射和扫描电子显微镜对产物进行结构和形貌表征,考察Q[6]和硫源对产物结构和性能的影响.结果表明,硫源对产物形貌和结构都有影响,Q[6]对硫化镉光催化性能有增强作用,15 mg Q[6]/CdS能使50 mL,6 mg/L的次甲基蓝溶液反应200 min时的降解率达到93.0;以上.