电机驱动微装配在双光子制备微结构中的应用

对微结构的制作、微装配系统进行了研究. 采用飞秒激光双光子聚合微加工技术制作有底座、精细的三维立体“拱形”微结构, 其高250μm、长300μm、厚50μm. 将此微结构与实验室自主搭建的二维微装配平台相结合, 利用自主编程的人机交互界面驱动步进电机, 远程操控微装配设备; 将荧光闪烁陶瓷粉末装配到微结构中, 对装配后的微结构进行荧光光谱表征发现, 纯荧光粉末和微结构中的荧光粉末的发射光谱在测量误差范围内基本一致, 表明荧光粉末的光学性质未发生改变. 利用该装置可以将各类微纳米级材料和微结构进行装配, 形成含有不同材料的微结构系统.     

TG酶与单宁酸对鱼明胶凝胶强度的影响

明胶是胶原蛋白适度水解生成的多肽分子聚合物,在食品、医药等领域具有广泛的应用。采用单宁酸和谷氨酰胺转胺酶（TG酶）对鱼明胶进行改性,探讨它们对鱼明胶凝胶强度的影响。分别从明胶浓度、氧化型和非氧化型的单宁酸添加、TG酶处理条件等方面进行优化,通过测定鱼明胶的凝胶强度变化,获得两种改性方式的最优组合。结果显示,在6%明胶浓度下,添加1 U·g-1TG酶和0.2%（V/V）的（2%m/V）氧化型单宁酸母液,鱼明胶的凝胶强度高达946.2 g。单宁酸和TG酶能协同作用,进而提升鱼明胶的凝胶强度。这一研究将有助于减少单位明胶用量,降低鱼明胶使用成本,拓展其应用范围。     

污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

基于模糊神经元PID算法的注塑机注射速度控制算法研究

基于一款市场较为畅销的注塑机, 设计出一种能精确控制注射速度的模糊神经元PID控制器. 首先, 设计出具有自学能力的神经元PID控制器, 利用模糊算法对其进行优化; 其次, 在原有注射速度线性数学模型的基础上, 构建注塑机注射速度的非线性模型; 最后, 利用MATLAB在所建数学模型的基础上对模糊神经元PID控制器进行仿真实验. 实验结果表明, 所设计控制器具有响应迅速、无超调量、控制精度高、控制稳定等优点.     

部分还原氧化石墨烯的制备、 表征及对人宫颈癌HeLa细胞的体外杀伤作用

以氧化石墨烯(GO)为原料, 利用温和方法制备了3种不同还原程度的部分还原氧化石墨烯pRGO₁, pRGO₂和pRGO₃(pRGO_1—3)； 利用傅里叶变换红外光谱(FTIR)、 拉曼光谱(Raman)、 X 射线光电子能谱(XPS)、 紫外-可见光谱(UV-Vis)、 透射电子显微镜(TEM)和 EDS能谱对其结构和形貌进行了表征. 细胞实验结果表明, 无激光照射下pRGO_1—3本身的细胞毒性较低; 近红外(NIR)激光照射下pRGO_1—3通过光热和光毒性双重作用杀伤肿瘤细胞. 实验结果显示了pRGO 在肿瘤光热疗法和光动力疗法领域的应用潜力.     

Tuning the shell thickness of core-shell α-Fe2O3@SiO2 nanoparticles to promote microwave absorption

Various advanced microwave absorbing materials have been developed for reducing/avoiding the harm of microwave radiation.Among them,core-shell structural nanomaterials have been widely fabricated for microwave absorption.However,the“structure-performance”relationship between shell thickness and microwave absorption performance is rarely reported.In this paper,we first explored the“structureperformance”relationship between shell thickness and microwave absorption performance,based on the core-she...     

Au(Ⅰ)-Catalyzed 6-endo-dig Cyclizations of Aromatic 1,5-Enynes to 2-(Naphthalen-2-yl)anilines Leading to Divergent Syntheses of Benzo[α]carbazole,Benzo[c,h]cinnoline and Dibenzo[i]phenanthridine Derivatives

A gold(Ⅰ)-catalyzed 6-endo-dig cyclization of aromatic 1,5-enynes was developed to synthesize 2-(naphthalen-2-yl)anilines.The functional group tolerance of this cyclization was examined systematically and a possible mechanism was proposed.The derivatization of 2-(naphthalen-2-yl)aniline was carried out to facile access to benzo[α]carbazole,benzo[c,h]cinnoline and dibenzo[i]phenanthridine derivatives in a divergent way.     

A self-powered and sensitive terahertz photodetection based on PdSe2

With the rapid development of terahertz technology, terahertz detectors are expected to play a key role in diverse areas such as homeland security and imaging, materials diagnostics, biology, medical sciences, and communication. Whereas self-powered, rapid response, and room temperature terahertz photodetectors are confronted with huge challenges. Here, we report a novel rapid response and self-powered terahertz photothermoelectronic (PTE) photodetector based on a low-dimensional material: palladium selenide (PdSe₂). An order of magnitude performance enhancement was observed in photodetection based on PdSe₂/graphene heterojunction that resulted from the integration of graphene and enhanced the Seebeck effect. Under 0.1-THz and 0.3-THz irradiations, the device displays a stable and repeatable photoresponse at room temperature without bias. Furthermore, rapid rise (5.0 μs) and decay (5.4 μs) times are recorded under 0.1-THz irradiation. Our results demonstrate the promising prospect of the detector based on PdSe₂ in terms of air-stable, suitable sensitivity and speed, which may have great application in terahertz detection.     

Vacuum-gap-based lumped element Josephson parametric amplifier

We propose a lumped element Josephson parametric amplifier with vacuum-gap-based capacitor.The capacitor is made of quasi-floating aluminum pad and on-chip ground.We take a fabrication process compatible with air-bridge technology,which makes our design adaptable for future on-chip integrated quantum computing system.Further engineering the input impedance,we obtain a gain above 20 dB over 162-MHz bandwidth,along with a quasi quantum-limit noise performance.This work should facilitate the development of quantum information processing and integrated superconducting circuit design.