PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

一维链状1,8-萘二酸四核锌配位聚合物[Zn4(1,8-nap)4(4,4''-bipy)2·0.5en·H2O]n的合成、结构、热稳定性及发光性质

羧酸配位聚合物是金属离子与有机羧酸构造块通过配位键或其他分子间弱作用力经自组装而成的一维、二维、三维的聚合物.由于这些配位聚合物具有新颖的拓扑结构以及在功能材料方面的潜在应用,同时又由于羧酸配合物比较稳定,所以设计和调控特殊配位聚合物成了当前的研究热点[1～4].     

Preparation and photochromic properties of pyrazolones/polyvinyl alcohol composite films

Novel photochromic composite films have been successfully fabricated by dispersing pyrazolone derivative:1,3-Diphenyl-4-(3-chlorobenzal)-5-hydroxypyrazole 4-phenylsemicarbazone (1a) into hydrosol of polyvinyl alcohol (PVA). The microstructure, photochromic behaviors and thermal bleaching properties were investigated by Raman spectroscopy, X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible absorption spectroscopy (UV-vis). The results showed that 1a was not only blended but also well dispersed in the PVA polymer films with a suitable content of chromophore. Upon UV light irradiation, the composite films gradually changed from colorless to yellow and recovered fully to the initial state upon thermal bleaching. The time constants of photochromic reactions were almost the same as those of 1a observed in their crystalline state, indicating that the photochromic phenomenon is barely disturbed by the polymer matrix.     

β-石竹烯醇的合成研究

石竹烯醇作为倍半萜醇在香料原料中占有一定地位，具有较强的生理活性，是一种平喘作用强而持久、毒性低的新平喘药物［１］．此外它还可抑制真菌和细菌的生长［２］，并且是棉田的某种甲虫的较强的引诱剂［３］．由于β－石竹烯醇存在于亚洲薄荷油或椒薄荷油的高沸点馏分...     

转基因棉花残体土壤降解特征的红外光谱研究

采用重铬酸钾容量法和红外光谱(FTIR)法分析了转基因抗虫棉花残体降解后的土壤腐殖质组分富里酸(FA)、胡敏酸(HA)和胡敏素(HM)的含量和结构特征.结果表明,棉花残体的降解使土壤各腐殖质组分含量增加,胡敏素的相对含量增加最大,胡敏酸次之,富里酸最小.与相应非转基因对照相比,转Bt基因棉花残体处理土壤各腐殖质组分含量...     

Simple schemes for generation of W-type multipartite entangled states and realization of quantum- information concentration

We propose simple schemes for generating W-type multipartite entangled states in cavity quantum electrodynamics (CQED). Our schemes involve a largely detuned interaction of Λ-type three-level atoms with a single-mode cavity field and a classical laser, and both the symmetric and asymmetric W states can be created in a single step. Our schemes are insensitive to both the cavity decay and atomic spontaneous emission. With the above system, we also propose a scheme for realizing quantum-information concentration which is the reverse process of quantum cloning. In this scheme, quantum-information originally coming from a single qubit, but now distributed into many qubits, is concentrated back to a single qubit in only one step.     

4-甲基苯硫乙酸与含氮配体构筑的两个化合物的合成，晶体结构，热稳定性与发光性质的研究

合成了2个配合物[ZnL₂(Him)₂] (1)和[ (Cu₂L₂(phen)₂( μ₂-Cl)₂)·(Cu₂( μ₂-L)₂(phen)₂Cl₂)] (2)(L=4-甲基苯硫乙酸,Him=咪唑,phen=1,10-邻菲咯啉),进行了元素分析、红外、热重等表征,并测定了其晶体结构。配合物1晶体属于单斜晶系,空间群为C2/c。配合物2晶体属于三斜晶系,空间群为P1。配合物1是由N-H…O氢键作用形成的一维带状结构。配合物2的单胞中含有2个分别由氯原子与羧基氧原子桥联的双核独立分子,通过C-H…O,C-H…Cl氢键以及C-H…π作用而构成三维结构。室温固体荧光分析显示配合物1具有较强荧光吸收。     

N263和TBP为协同流动载体的液膜体系分离钐(Ⅲ)和钆(Ⅲ)的研究

研究了N263和TBP为协同载体的液膜体系分离钐和钆的行为.考察了膜相添加剂、内水相反萃剂、外水相盐析剂和膜相中载体浓度对传质分离的影响.当用TBP作为膜相添加剂时,N263能很好地溶解在煤油中.N263-TBP-LMA-1-煤油和NH₄NO₃协同流动载体液膜体系在迁移稀土离子时表现出"倒序"特性,与单纯的N263体系相比,该体系对钐、钆具有较高的选择性.     

Preparation of insulin-loaded PLA/PLGA microcapsules by a novel membrane emulsification method and its release in vitro

Uniform-sized biodegradable PLA/PLGA microcapsules loading recombinant human insulin (rhI) were successfully prepared by combining a Shirasu Porous Glass (SPG) membrane emulsification technique and a double emulsion-evaporation method. An aqueous phase containing rhI was used as the inner water phase (w1), and PLA/PLGA and Arlacel 83 were dissolved in a mixture solvent of dichloromethane (DCM) and toluene, which was used as the oil phase (o). These two solutions were emulsified by a homogenizer to form a w1/o primary emulsion. The primary emulsion was permeated through the uniform pores of a SPG membrane into an outer water phase by the pressure of nitrogen gas to form the uniform w1/o/w2 droplets. The solid polymer microcapsules were obtained by simply evaporating solvent from droplets. Various factors of the preparation process influencing the drug encapsulation efficiency and the drug cumulative release were investigated systemically. The results indicated that the drug encapsulation efficiency and the cumulative release were affected by the PLA/PLGA ratio, NaCl concentration in outer water phase, the inner water phase volume, rhI-loading amount, pH-value in outer water phase and the size of microcapsules. By optimizing the preparation process, the drug encapsulation efficiency was high up to 91.82%. The unique advantage of preparing drug-loaded microcapsules by membrane emulsification technique is that the size of microcapsules can be controlled accurately, and thus the drug cumulative release profile can be adjusted just by changing the size of microcapsules. Moreover, much higher encapsulation efficiency can be obtained when compared with the conventional mechanical stirring method.     

Fe-Pb合金凝固多相体系内偏析形成过程的三维数值模拟

基于Eulerian-Eulerian方法和流体体积技术,建立了三维多相流体动力学凝固模型,并将其与质量、动量、溶质和热焓守恒方程相耦合,对Fe-Pb合金侧向凝固过程进行了数值模拟.首先,分析了分布面积二次梯度((SPb))和浓度二次梯度((CPb))对偏析模式的影响,结果表明:液、气两相的流动相变使偏析模式表现为上端X形下端V形,X偏析由气相相变驱动力和多取向相变作用下的"散射"形成;ttc时,随(SPb)和(CPb)曲线降低,X偏析的下偏析角增大,上偏析角和V偏析角减小,Pb收得率增大,有利于获得含量稳定弥散的凝固组织.此外,还研究了液、气两相交互流动下通道偏析的形成机理,结果表明:通道偏析仅存在于流动-相变交互作用(ul·cl和ug·cg)为负值的区域,该区域的流动扰动抑制合金的局部凝固,促进偏析通道生长;流动-相变交互作用负值越小,偏析通道持续增长越稳定.模拟结果与实验结果相符合,验证了模型的准确性.