Edge-pumped passively Q-switched thin Nd:YAG slab lasers

We report a high-power thin Nd：YAG slab laser with slab dimension of 1 × 10 ×60 （mm） partially edgepumped by diode laser arrays. Passive Q-switching is achieved with a Cr^4＋ ：YAG microchip adopted as the saturable absorber mirror. The pulse duration is around 10 ns while the pulse repetition rate is higher than 10 kHz. The average output power of 70 W is obtained with a slope efficiency of 36%. The diffraction limited beam quality in the thickness direction is obtained by controlling the pump beam diameter inside the slab. The laser head is very compact with size of only 60 × 74×150 （mm）.     

High-power diode-end-pumped Tm：YAP and Tm：YLF slab lasers

Diode-end-pumped continuous-wave(CW) Tm:YAP and Tm:YLF slab lasers are demonstrated. The a-cut Tm:YAP and Tm:YLF slabs with doping concentrations of 4 at.-% and 3.5 at.-%,respectively,are pumped by fast-axis collimated laser diodes at room temperature. The maximum CW output powers of 72 and 50.2 W are obtained from Tm:YAP and Tm:YLF,respectively,while the pump power is 220 W,corresponding to the slope efficiencies of 37.9% and 26.6%,respectively.     

Study of diode-pumped Yb:YAG disk lasers at low temperature

A Yb:YAG disk laser with V-shaped stable resonator and active-mirror configuration,end-pumped by a 940-nm InGaAs laser diode array,is demonstrated.Performances and optimization of the disk laser at low temperature over a range of 130-200 K are investigated theoretically and experimentally.Laser output energy of 1.46 J/pulse operating at 10-Hz repetition rate is obtained with the optimum output coupler transmission of 30%,and the corresponding optical-to-optical efficiency is 48.7%.     

End-Pumped Tm:YAG Ceramic Slab Lasers

Lasers from a Tm：YAG slab is end-pumped by continuous-wave output of the Tm：YAG ceramic ceramic am~e reported for the t~rst time to our best knowledge. The Tm：YAG ceramic a laser diode with central wavelength 792nm. At room temperature, the maximum power is 4.5 W, and the sloping efficiency is obtained to be 20.5%. The laser spectrum is centered at 2015nm.     

分数自成像平面波导的光束组束

研究了激光束在分数自成像平面波导中的传输特性,提出了利用分数自成像平面波导进行光束组束的技术方案,讨论了激光束之间相位失配对光束组束的影响,并对两个输出平均功率为300W的板条激光器的光束组束进行了数值实验模拟.结果表明,分数自成像平面波导的光束组束可以有效地改善多个激光器组束后的光束质量因子M²,从而提高激光输出的亮度;而且这种组束方法对激光束之间相位失配的敏感度明显降低. 关键词： 分数自成像 平面波导 组束 光束质量     

部分抽运的板条激光器的热效应分析

基于热传导方程和高斯赛德尔数值计算方法,对部分抽运板条激光器的温度分布、热应力和热致折射率变化等热效应进行了详细分析,并与单侧抽运及双侧抽运方式进行了比较。结果表明,设计合理的部分抽运板条激光器,可以获得较高的抽运效率,其热效应相比于均匀抽运的情况并没有显著劣化,不论是采用锯齿形传播方式还是直线传播方式的激光器都可以获得较好的光束质量,当一束高斯激光直线经过板条晶体中部时,光束质量因子为1.4,若采用锯齿形传播方式,则光束质量因子可提高到1.1。     

板条激光放大器中寄生振荡的研究

寄生振荡的存在使得放大器在信号光到达之前消耗了大量的反转粒子数,降低了放大器的激光增益和储能效率,严重地影响了激光放大器的性能,尤其对高功率激光放大器。在理论分析和实验研究的基础上,以Nd∶YAG晶体板条为例,用8条半导体激光阵列对晶体进行双侧抽运,研究了高功率激光放大器的寄生振荡现象,分析了板条晶体寄生振荡产生的原因,并详细比较了晶体在不同的抽运功率和表面处理下的放大效果,得到了2倍的单程放大,当输入能量为140 mJ时,获得了278 mJ的激光输出。     

用于铝板缺陷无损检测的激光超声有限元模拟研究

激光超声技术能够在材料表面形成超声波，是实现材料缺陷无损检测的重要环节。借助Abaqus有限元分析工具，基于激光超声热弹机制建立了轴对称铝板的表面缺陷模型，模拟了激光激发产生的表面波在材料中的传播特性及其与铝板缺陷的相互作用过程。数值模拟实验表明，铝板表面缺陷的分布深度值越大，反射波越强，并且当缺陷深度达到一定程度时，反射波的幅值趋于稳定；但缺陷的分布宽度对于反射波的影响则十分有限。所得结论为基于激光超声的材料缺陷的定量检测及识别提供有效的理论依据。     

Short Tm^3＋-doped fiber lasers with watt-level output near 2 μm

High-power operation of diode-pumped fiber lasers at wavelength near 2 μm are demonstrated with short length of heavily Tm^3＋-doped silica glass fibers. With 7-cm long fiber, a laser at near 2 μm is obtained with the threshold of 135 mW, maximum output power of 1.09 W, and slope efficiency of 9.6% with respect to the launched power from a laser diode at 790 nm. The output stability of this fiber laser is within 5%. The dependence of the performance of fiber lasers on the operation temperature and cavity configuration parameters is also investigated.