排序方式: 共有15条查询结果,搜索用时 46 毫秒
1.
2.
3.
研究了基于互补色的高效聚合物白光器件,双色材料包括蓝绿光材料双(4,6-二氟苯基吡啶-N,C2)吡啶甲酰合铱(Firpic)和黄光材料三[3-(2,6-二甲基苯氧基)-6-(2-噻吩基)-哒嗪]铱(Fs-1),器件结构为ITO/PEDOT(40 nm)/PVK:OXD-7:Firpic:Fs-1(80 nm)/Ba(4 nm)/Al(120 nm).当发光层材料PVK∶OXD-7∶Firpic∶Fs-1质量比为63∶27∶10∶0.25时,用溶液加工方法得到高效白光器件,此时CIE色坐标为(0.30,0.39),最大电流效率为10.8 cd.A-1,亮度可达到4200 cd.m-2.在此基础上,引入水溶性电子注入材料聚[9,9-二(3′-N,N-二甲基胺基丙基-2,7-芴-2,7-交-(9,9-二辛基芴)](PFN)修饰阴极界面,使载流子注入和传输更平衡,当阴极为PFN(20 nm)/Al(120 nm)时,电流效率获得显著改善,达到13.1 cd.A-1,此时电流密度为4.9 mA.cm-2,亮度可达到6096 cd.m-2,白光器件的色坐标为(0.33,0.39),同时发光光谱稳定.另外通过电致发光(EL)、光致发光(PL)光谱及能级结构图分析了载流子俘获和能量转移在发光中的作用. 相似文献
4.
绝缘层LiF/Al电极对提高P-PPV发光器件发光性能的研究 总被引:1,自引:0,他引:1
为了提高聚合物电致发光器件中Ba(Ca)/Al阴极的稳定性,在该阴极与聚合物发光材料poly(2-(4-ethylexyl)phenyl-1,4-phenylene vinylene)(P-PPV)层之间插入一层7nm的LiF绝缘层,发光器件的发光性能在多项参数(发光器件的电压.电流特性、发光强度及外量子效率,以及电流效率等发光性能指标)上能够与工作性能优良但稳定性较差的Ba(Ca)/Al电极结构PLEDs器件的发光特性具有可比性。这对于研制高效率、高稳定的聚合物电致发光器件并最终将其用于商业目的,具有重大现实意义。 相似文献
5.
一种新型共轭聚合物发光二极管老化的拉曼光谱研究 总被引:1,自引:1,他引:0
通过显微共焦拉曼光谱 ,对一种以新型的共轭聚合物半导体材料 3,4 (2 乙基己氧基 )苯基 1,3 丙二醇酯 (poly(2 (4 Ethylhexyl) phenyl 1,4 phenylenevinylene) (P PPV) )为发光层的聚合物发光二极管(PLEDs)器件进行了老化研究 ,无论是光致发光光谱还是拉曼光谱都提供证据说明造成器件老化的原因主要是发光层的聚合物的主链结构 ,即聚合物的共轭结构被破坏 ,这对提高以P PPV作为发光层的PLEDs器件的性能提出有用信息。 相似文献
6.
有机/聚合物电致发光器件(O/PLEDs)具有低能耗、宽视角、色彩丰富、快速响应、绿色环保以及可制备柔性屏等诸多优异特性,被业界公认为是21世纪最具潜质和最具发展前景的高技术领域之一.白光聚合物电致发光器件(WPLEDs)具有可通过湿法加工技术(如旋涂、丝网印刷、喷墨打印)大大降低器件的制作成本等优点,在显示和照明领域有着极大的应用前景,而受到人们广泛的关注.本文就国内在白光聚合物和聚合物白光器件方面的的研究现状,从聚合物白光器件和制备单一白光聚合物两个方面进行阐述,并介绍这一领域的发展前景和目前亟待解决的一些问题. 相似文献
7.
Highly efficient polymer phosphorescent light-emitting devices based on a new polyfluorene derivative as host 下载免费PDF全文
Several highly efficient iridium-complex polymer light-emitting devices (PLEDs) are fabricated,with a newly synthesized blue conjugated polymer,poly[(9,9-bis(4-(2-ethylhexyloxy)phenyl)-fluorene)-co-(3,7-dibenziothiene-S,S-dioxide15)] (PPF-3,7SO15),chosen as host.High luminous efficiencies of 7.4 cd·A 1 and 27.4 cd·A 1 are achieved in red and green PLEDs,respectively,by optimizing the doping concentrations of red phosphorescent dye iridium bis(1-phenylisoquinoline) (acetylacetonate) (Ir(piq)) and green phosphorescent dye iridium tris(2-(4-tolyl)pyridinato-N,C 2) (Ir(mppy) 3).Furthermore,highly efficient white PLEDs (WPLEDs) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.35,0.38) are successfully produced by carefully controlling the doping concentration of the irid-ium complex.The obtained WPLEDs show maximal efficiencies of 14.4 cd·A 1 and 10.1 lm·W 1,which are comparable to those of incandescent bulbs.Moreover,the electroluminescent spectrum of the white device with an initial luminance of about 1000 cd·m 2 is stable,subject to constant applied current stress,indicating that good device stability can be obtained in this system. 相似文献
8.
Improved Performance of Polymer Light-Emitting Diodes with an Electron Transport Emitter by Post-Annealing 下载免费PDF全文
The enhancement of electroluminescent (EL) performance of polymer light emitting diodes (PLEDs) with electron transport emitter poly(9,9-dioctylfluorene-co-benzothiadiazole) (FSBT) through thermal annealing treatment is investigatedl Post-annealing of the PLEDs at temperature 120℃ over the glass transition temperature of F8BT (99℃) could bring about an improvement of EL efficiency to more than twice that of the untreated devices, up to 6.02 cd/A. The improvement of the EL efficiency is due to the balance of electron and hole carriers in the exciton recombination zone, because the dominative electron current in the PLEDs could be reduced by post-annealing in terms of both issues of electron transport limited in the FSBT film and electron injection decreased by the interface between FSBT/cathode. 相似文献
9.
10.
聚苯撑乙烯(PPV)类聚合物是优异的发光材料, 有望作为全色显示中三基色的材料之一得到应用. 我们采用2-溴-1,4-亚二甲苯二乙酯为原料, 合成了商品名为Supper Yellow PPV (SY PPV)的苯基取代PPV. 中间体、单体和聚合物的结构都通过核磁共振、元素分析进行了表征. SY PPV的吸收峰在434 nm, 吸收边在510 nm, 带隙2.44 eV. 光致发光峰值和电致发光峰值分别在516和552 nm. SY PPV的器件性能为: 启动电压为2.4 V, 最大亮度大于49000 cd·m-2, 最大流明效率为21 cd·A-1, 显著优于采用老方法合成SY PPV的最大流明效率(16-18 cd·A-1). 相似文献