掺杂meso-四(对葵酰氧基苯基)卟啉铂的饱和红色聚合物发光器件

在聚2,7-(9,9-二辛基)芴(PFO)和30%的2-(对联苯基)-5-(对叔丁基苯基)-1,3,4-噁二唑(PBD)主体材料中掺杂短磷光寿命的meso-四(对正葵酰氧基苯基)卟啉铂（TDPPPt）,制成聚合物基发光器件。 器件结构为：ITO/PEDOT∶PSS/PVK/PFO+30%PBD∶TDPPPt/Ca/Al（ITO:氧化铟锡;PEDOT:聚3,4-乙撑二氧噻吩;PSS：聚苯乙烯磺酸盐;PVK：聚乙烯基咔唑）。 当客体掺杂浓度≥3%时,器件给出饱和的红色发射。 当驱动电压从7 V升高至14 V时,器件发光色度保持不变,CIE(国际发光照明委员会)色坐标稳定在(0.66,0.28）左右。 器件的最大亮度和电流效率分别为1.390 cd/m2和1.34 cd/A。 在电流密度100×10-3和150×10-3 A/cm2时,电流效率分别为1.18和0.99 cd/A,器件在高电流密度下具有良好的稳定性。     

侧链含金属铱配合物的电磷光白光聚合物

设计了一系列新型芴-咔唑电磷光共轭聚合物.通过共价键将双(2-(9,9-二乙基-9H-芴-2-基)吡啶-N,C2’)合铱(III)(Ir Fpy)接枝到3,6-二溴咔唑的N-烷基侧链,采用Suzuki缩聚反应合成了铱配合物(Ir Fpy)含量分别为0.25 mol%,0.5 mol%和1 mol%的聚合物PF-Ir Fpy.当引入的配合物Ir Fpy含量为1 mol%时,得到的共轭聚合物发射色坐标为(0.44,0.56)的黄光.随着接枝的铱配合物Ir Fpy在共轭聚合物中含量降低,作为主体的聚(9,9-二辛基芴)蓝光发射不能被完全淬灭,得到共聚物同时发射主体蓝光及客体铱配合物黄光的单分子白光共轭聚合物.共聚物发光器件结构为ITO/PEDOT:PSS(50 nm)/polymer+PBD(30 wt%)(80nm)/Ba(4 nm)/Al(150 nm)[氧化铟锡/苯磺酸掺杂聚乙烯基二氧噻吩/聚合物+(2,4-二苯-5-4-叔丁基苯-1,3,4-噁二唑)(w=30%)/钡/铝],基于共聚物PF-Ir Fpy025的器件流明效率为3.97 cd/A,色坐标为(0.34,0.34),非常接近于标准白光发射的色坐标(0.33,0.33).为了研究采用共聚物PF-Ir Fpy025和PF-Ir Fpy05制备的白光器件的光谱稳定性,测试了外加电压在8~13 V范围内的EL光谱,当外加电压从8 V升高到13 V时,两个EL器件都表现出了良好的EL光谱稳定性.研究结果表明,在共轭聚合物侧链上引入螯合金属铱配合物单元是实现高效、稳定的白光电致磷光器件的有效方法之一.     

9,9-二-(3-(9-苯咔唑基))-2,7-芘基芴的光电性质

芴类化合物作为有机电致发光材料近年来引起了人们的广泛关注, 其具有高亮度和高工作效率等性能. 本论文采用量子化学方法研究了一种新型的芴类发光材料, 9,9-二-(3-(9-苯咔唑基))-2,7-芘基芴的光电性质. 具体研究内容包括基态和激发态几何结构、前线分子轨道、能隙、电离能、电子亲和势、重组能以及吸收光谱和发射光谱等. 理论计算结果表明, 9,9-二-(3-(9-苯咔唑基))-2,7-芘基芴发射光谱为450.6 nm, 其在电致发光器件应用上是一种具有开发前景和实用价值的蓝光发光材料.     

烷基芴与三苯胺取代-3,6-芴共聚物的合成及其性能

用Suzuki偶联反应制备了一系列新型的9,9-二辛基-2,7-芴(DOF)与9,9-二(4-二苯胺基苯基)-3,6-芴(36FT)的共聚物. 所有的聚合物均可溶于常见的有机溶剂(如THF, CHCl3和甲苯等), 分子量在47000~189000之间. 电化学研究结果表明, 所有聚合物的HOMO能级都高于均聚烷基芴, 并且随着36FT含量的增加, HOMO值逐渐上升. 以该类聚合物为发光层制作了结构为ITO/PEDOT/PVK/polymer/Ba/Al的器件, 获得了稳定的蓝光发射, 其中以36PFT10为发光层的器件获得了0.52%的最大外量子效率.     

二-[2',6'-二氟-2,3'-联吡啶- N,C4'][2,4-戊二酮-O,O]铱(III)的合成及其光致和电致发光性能

以2',6'-二氟-2,3'-联吡啶(Hdfpypy)为主配体,乙酰丙酮为辅助配体,合成了二-[2',6'-二氟-2,3'-联吡啶-N,C4'][2,4-戊二酮-O,O]铱(Ⅲ)配合物((dfpypy)2Ir(acac))。在THF溶液中,该配合物溶液最大光致发光光谱为465 nm(半峰宽为53 nm),同时伴有490 nm的肩峰,与面式-Ir(dfpypy)3在438和463 nm两个强度相近的发光光谱相比,发生了红移。配合物在脱气四氢呋喃溶液中的PL量子效率为0.41。将(dfpypy)2Ir(acac)以不同的浓度掺杂在主体材料聚乙烯基咔唑(PVK)中,制备了器件结构为:ITO/PEDOT∶PSS(聚二氧乙基噻吩∶聚对苯乙烯磺酸)/PVK∶(dfpypy)2Ir(acac)(100∶x)(70 nm)/Ba/Al的蓝色聚合物发光器件(x代表掺杂量)。在驱动电压为15.4 V时,2%掺杂器件的最大发光亮度为1400 cd/m2。当电流密度为0.23×10-3A/cm2时,2%掺杂器件最大亮度效率(ηc)为1.6 cd/A。器件的色坐标(CIE)值为(0.15,0.27)。     

一步法合成螺双芴及螺氧杂蒽衍生物及其在有机发光二极管中的应用:性能增强及相关的光学现象（英文）

以芴为原料,以钯为催化剂一步合成了2-(9-苯基芴基)-9,9′螺二芴(PF-SBF)。以PF-SBF作为有机发光二极管的发光及主体材料(FIrpic为磷光客体)时,观察到了不同于PF-SBF及FIrpic发光的红光带。这分别源于PF-SBF分子间的聚集和发光层/传输层诱导的激基复合物。通过选择合适的空穴和电子传输层,有效抑制了激基复合物的发光。同时,PF-SBF和TAPC双主体的结构不仅实现了纯FIrpic和Ir(ppy)_3蓝光和绿光,还大幅提升了器件性能。蓝光、绿光器件的最大电流效率和最大亮度分达到16.7、50.5 cd?A~(-1)和7857 cd?m~(-2)(11 V)、23390 cd?m~(-2)(8 V)。另外,除了PF-SBF,利用相似的合成方法,我们也合成了2-(9-苯基芴基)-9,9′螺芴氧杂蒽(PF-SFX),其较大的三线态能级(2.8 eV)较PF-SBF更适合做蓝光主体。以TAPC和PFSFX为双主体的器件最大电流效率提升到了22.6 cd?A~(-1)。所有实验结果均表明,PF-SBF和PF-SFX是构建高效绿光/蓝光磷光主体材料的有效结构单元。     

一步法合成螺双芴及螺氧杂蒽衍生物及其在有机发光二极管中的应用：性能增强及相关的光学现象关

以芴为原料,以钯为催化剂一步合成了2-(9-苯基芴基)-9,9′螺二芴(PF-SBF)。以PF-SBF作为有机发光二极管的发光及主体材料(FIrpic为磷光客体)时,观察到了不同于PF-SBF及FIrpic发光的红光带。这分别源于PF-SBF分子间的聚集和发光层/传输层诱导的激基复合物。通过选择合适的空穴和电子传输层,有效抑制了激基复合物的发光。同时,PF-SBF和TAPC双主体的结构不仅实现了纯FIrpic和Ir(ppy)3蓝光和绿光,还大幅提升了器件性能。蓝光、绿光器件的最大电流效率和最大亮度分达到16.7、50.5 cd·A^-1和7857 cd·m^-2(11 V)、23390 cd·m^-2(8 V)。另外,除了PF-SBF,利用相似的合成方法,我们也合成了2-(9-苯基芴基)-9,9′螺芴氧杂蒽(PF-SFX),其较大的三线态能级(2.8 eV)较PF-SBF更适合做蓝光主体。以TAPC和PFSFX为双主体的器件最大电流效率提升到了22.6 cd·A^-1。所有实验结果均表明,PF-SBF和PF-SFX是构建高效绿光/蓝光磷光主体材料的有效结构单元。     

超薄铝/碳酸锂修饰氧化铟锡阴极制备蓝色磷光反转底发光有机发光二极管

在氧化铟锡（ITO）阴极上依次蒸镀2 nm铝和2 nm碳酸锂（Li2CO3）薄膜作为电子注入层,成功制备出器件结构为ITO/Al/Li2CO3/SPPO13/SPPO13∶FIrpic/TCTA/MoO3/Al(SPPO13：2,7-双（二苯基磷）-9,9′-螺二[芴];FIrpic：双(4,6-二氟苯基吡啶-N,C2)吡啶甲酰合铱;TCTA：4,4′,4″-三(咔唑-9-基)三苯胺)的蓝色磷光反转底发光有机发光二极管（IBOLED）。 结果表明,Al/Li2CO3作为电子注入层可以有效降低ITO与有机材料之间的电子注入势垒,蓝色磷光IBOLED的起亮电压由11 V降至4.2 V,器件的发光效率也得到有效提高。 蓝光磷光IBOLED的最大电流效率与功率效率分别达到了28.2 cd/A和19.6 lm/W,制备出的反转结构器件性能可与传统正置结构比美,说明Al/Li2CO3可以作为反转有机发光二极管优良的电子注入层。     

一种含载流子传输基的铱配合物:合成及深黄色电致磷光器件

合成了一种含有载流子传输基新的铱配合物(BPPBI)2Ir(ECTFBD)[HBPPBI:1-苯基-2-(4-联苯基)苯并咪唑,HECTFBD:1-(9-乙基-3-咔唑基)-4,4,4-三氟-1,3-丁二酮],其结构和组成经核磁共振氢谱和元素分析所证实。研究了这种铱配合物二氯甲烷溶液的光物理和电化学性质。制作了基于这种铱配合物的电致磷光器件。器件结构是ITO/MoO3(10 nm)/NPB(80 nm)/CBP:x%(BPPBI)2Ir(ECTFBD)(20 nm)/TPBi(45 nm)/LiF/Al[x%:质量百分比为4%和7%的掺杂浓度;NPB:N4,N4′-二(1-萘基)-N4,N4′-二苯基-4,4′-联苯二胺,CBP:4,4′-二(9-咔唑基)联苯,TPBi:1,3,5-三(2-(1-苯基)苯并咪唑基)苯]。这些器件显示出深黄色的发射。对于7%掺杂浓度器件,最大的电流效率和最大发光亮度分别是5.2 cd.A-1和8 690 cd.m-2。     

混合蓝色和绿色发射的高亮度白色有机电致发光器件

使用星形六苯芴类新材料1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2-y1)benzene(HKEthFLYPh)分别制备了三种不同结构的有机电致发光器件.在结构为indium-tin oxide(ITO)/NPB(40nm)/HKEthFLYPh(10nm)/Alq3(50nm)/Mg:Ag(200nm)的器件中,获得了两个电致发光谱峰分别位于435和530nm处的明亮白光.HKEthFLYPh足能量传输层;N,N'-bis-(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine(NPB)是空穴传输层和蓝色发光层;tris(8-hydroxyquinoline)aluminum(Alq3)是电子传输层和绿色发光层.结果表明,当驱动电压为15V时,器件的最大亮度达到8523cd·m-2;在5.5V时,器件达到最大流明效率为1.01m·W-1.在电压为9V时,CIE色坐标为(0.29,0.34).此外,通过改变HKEthFLYPh层的厚度,发现蓝色发射的相对强度随着HKEthFLYPh层厚度的增加而增强.     

Synthesis of new polyfluorene copolymers with a comonomer containing triphenylamine units and their applications in white‐light‐emitting diodes

Novel conjugated polyfluorene copolymers, poly[9,9‐dihexylfluorene‐2,7‐diyl‐co‐(2,5‐bis(4′‐diphenylaminostyryl)‐phenylene‐1,4‐diyl)]s (PGs), have been synthesized by nickel(0)‐mediated polymerization from 2,7‐dibromo‐9,9‐dihexylfluorene and 1,4′‐dibromo‐2,5‐bis(4‐diphenylaminostyryl)benzene with various molar ratios of the monomers. Because of the incorporation of triphenylamine (TPA) moieties, PGs exhibit much higher HOMO levels than the corresponding polyfluorene homopolymers and are able to facilitate hole injection into the polymer layer from the anode electrode in light‐emitting diodes. Conventional polymeric light‐emitting devices with the configuration ITO/PEDOT:PSS/polymer/Ca/Al have been fabricated. A light‐emitting device produced with one of the PG copolymers (PG10) as the emitting layer exhibited a voltage‐independent and stable bluish‐green emission with color coordinates of (0.22, 0.42) at 5 V. The maximum brightness and current efficiency of the PG10 device were 3370 cd/m² (at 9.6 V) and 0.6 cd/A, respectively. To realize a white polymeric light‐emitting diode, PG10 as the host material was blended with 1.0 wt % of a red‐light‐emitting polymer, poly[9,9‐dioctylfluorene‐2,7‐diyl‐alt‐2,5‐bis(2‐thienyl‐2‐cyanovinyl)‐1‐(2′‐ethylhexyloxy)‐4‐methoxybenzene‐5′,5′‐diyl] (PFR4‐S), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV). The device based on PG10:PFR4‐S showed an almost perfect pure white electroluminescence emission, with Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.36) at 8 V; for the PG10:MEH‐PPV device, the CIE coordinates at this voltage were (0.30, 0.40) with a maximum brightness of 1930 cd/m². Moreover, the white‐light emission from the PG10:PFR4‐S device was stable even at different driving voltages and had CIE coordinates of (0.34, 0.36) at 6 V and (0.31, 0.35) at 10 V. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1199–1209, 2007     

Synthesis of copolyfluorenes containing green chromophores based on triphenylamine unit and their application in light‐emitting diodes

Two series of new copolyfluorenes ( PFTP, PFTT ) were prepared by the Suzuki coupling reaction from two green‐emitting dibromo monomers (TP‐Br, TT‐Br) based on triphenylamine unit to be applied in white light electroluminescent devices. They were characterized by molecular weight determination, elemental analysis, DSC, TGA, absorption and photoluminescence spectra, and cyclic voltammetry. The estimated actual contents of the TP and TT chromophores were lower than 7.8 mol % and 1.9 mol % for PFTP and PFTT , respectively. In film state both copolyfluorenes showed photoluminescence at 400–470 and 470–600 nm originated from fluorene segments and the chromophores, respectively, due to incomplete energy transfer. Light‐emitting diodes with a structure of ITO/PEDOT:PSS/copolymer/Ca(50 nm)/Al(100 nm) showed major emission at 493–525 nm, plus minor emission at 400–470 nm when chromophore contents were low. The maximum brightness and maximum current efficiency of PFTP2 device were 8370 cd/m² and 1.47 cd/A, whereas those of PFTT1 device were 9440 cd/m² and 1.77 cd/A, respectively. Tri‐wavelength white‐light emission was realized through blending PFTT1 with poly(9,9‐dihexylfluorene) and a red‐emitting iridium complex, in which the maximum brightness and CIE coordinates were 6880 cd/m² and (0.31, 0.33), respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1553–1566, 2009     

White electroluminescence from a single polyfluorene containing bis‐DCM units

A series of fluorene‐based copolymers composed of blue‐ and orange‐light‐emitting comonomers were synthesized through palladium‐catalyzed Suzuki coupling reactions. 9,9‐Dihexylfluorene and 2‐(2,6‐bis‐{2‐[1‐(9,9‐dihexyl‐9H‐fluoren‐2‐yl)‐1,2,3,4‐tetrahydroquinolin‐6‐yl]‐vinyl}‐pyran‐4‐ylidene)‐malononitrile (DCMF) were used as the blue‐ and orange‐light‐emitting chromophores, respectively. The resulting single polymers exhibited simultaneous blue (423/450 nm) and orange (580–600 nm) emissions from these two chromophores. By adjusting the fluorene and DCMF contents, white light emission could be obtained from a single polymer; a device with an ITO/PEDOT:PSS/polymer/Ca/Al configuration was found to exhibit pure white electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.31), a maximum brightness of 1180 cd/m², and a current efficiency of 0.60 cd/A. Furthermore, the white light emission of this device was found to be very stable with respect to variation of the driving voltage. The CIE coordinates of the device were (0.32, 0.29), (0.32, 0.29), and (0.33, 0.31) for driving voltages of 7, 8, and 10 V, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3380–3390, 2007     

Deep‐blue light‐emitting polyfluorenes containing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers

Blue light‐emitting polyfluorenes, PPF‐FSOs and PPF‐SOFs were synthesized via introducing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers (2,7‐diyl and 2′,7′‐diyl) (FSO/SOF) into the poly[9,9‐bis(4‐(2‐ethylhexyloxy) phenyl)fluorene‐2,7‐diyl] (PPF) backbone, respectively. With the increasing contents of FSO and SOF moieties, the absorption and PL spectra of PPF‐FSOs show slight red shift, while that of PPF‐SOFs exhibit blue shift, respectively. The HOMO and LUMO levels reduce gradually with increasing SOF unit in PPF‐SOFs. The polymers emit blue light peaked around 430–445 nm and show an excellent spectral stability with the variation in current densities. The distinctly narrowing EL spectra were observed with the incorporation of isomers in the polymers. The full width at half maximum reduced by 15 nm for PPF‐SOFs, resulting in a blue shift with the CIE coordinates from (0.16, 0.11) to (0.16, 0.08). With a device configuration of ITO/PEDOT:PSS/EML/CsF/Al, a maximum luminance efficiency (LE_max) of 2.00 cd A^?1, a maximum external quantum efficiency (EQE_max) of 3.76% with the CIE coordinates of (0.16, 0.08) for PPF‐SOF15 and a LE_max of 1.68 cd A^?1, a EQE_max of 2.38% with CIE (0.16, 0.12) for PPF‐FSO10 were obtained, respectively. The result reveals that spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers are promising blocks for deep‐blue light‐emitting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2332–2341     

基于N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌的白色和黄色有机电致发光器件的性能

通过研究新型荧光染料N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌(MoBCzHQZn)的电致发光(EL)特性, 发现MoBCzHQZn具有较强的发光特性和空穴传输特性, 利用此特性制备了非掺杂型的有机电致白光器件和掺杂型的有机电致黄光器件. 白光器件的结构为ITO/2T-NATA(20 nm)/MoBCzHQZn(25 nm)/NPBX(13 nm)/BCP(8nm)/Alq3(34 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了白光发射, 色坐标为(0.3719, 0.3275), 最大发光亮度为3414 cd·m-2, 在14 V 电压下的最大发光效率为1.69 cd·A-1、黄光器件的结构为ITO/2T-NATA(20 nm)/CBP:6%Ir(ppy)3:10%MoBCzHQZn(25 nm)/TPBi:6%Ir(ppy)3(47 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了黄绿光发射, 色坐标为(0.3590, 0.5787), 最大发光亮度为11073 cd·m-2, 在9 V电压下的最大发光效率为2.51 cd·A-1.     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

混合蓝色和绿色发射的高亮度白色有机电致发光器件

使用星形六苯芴类新材料1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2-yl)benzene (HKEthFLYPh)分别制备了三种不同结构的有机电致发光器件. 在结构为indium-tin oxide (ITO)/NPB (40 nm)/HKEthFLYPh (10 nm)/Alq3(50 nm)/Mg:Ag (200 nm)的器件中, 获得了两个电致发光谱峰分别位于435 和530 nm处的明亮白光. HKEth-FLYPh是能量传输层; N,N’-bis-(1-naphthyl)-N,N’-diphenyl-(1,1’-biphenyl)-4,4’-diamine (NPB)是空穴传输层和蓝色发光层; tris(8-hydroxyquinoline)aluminum (Alq3)是电子传输层和绿色发光层. 结果表明, 当驱动电压为15 V时, 器件的最大亮度达到8523 cd·m-2; 在5.5 V时, 器件达到最大流明效率为1.0 lm·W-1. 在电压为9 V时, CIE色坐标为(0.29, 0.34). 此外, 通过改变HKEthFLYPh层的厚度, 发现蓝色发射的相对强度随着HKEthFLYPh层厚度的增加而增强.     

高效磷光铱配合物的合成及电致发光性能研究

合成了一种含苯并噻唑结构配体的环金属化铱配合物(ffbi)₂Ir(acac)，(其中ffbi为1-(4-氟苄基)-2-(4-氟苯基)苯并咪唑，acac为乙酰丙酮)，并以其作为发光体, 制备了有机电致发光器件。结果表明该配合物具有强磷光发光特性，器件发绿色光。其中结构为TCTA(40 nm)/CBP∶Ir(6.3%，30 nm)/BCP(10 nm)/Alq(40 nm)的电致发光器件在12 V电压下最大发光亮度达41 499 cd·m^-2，在8 V电压下，最大外量子效率达5.7%。     

Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Improving optoelectronic properties of the 2,7‐polyfluorene derivatives with carbazole and oxadiazole pendants by incorporating the blue‐emitting iridium complex pendants in C‐9 position of fluorine unit

To study the influence of a blue‐emitting iridium complex pendant on the optoelectronic properties of its 2,7‐polyfluorene (PF) derivatives with the carbazole and oxadiazole pendants, a class of 2,7‐PF derivatives containing carbazole, oxadiazole, and/without the cyclometalated iridium complex pendants in the C‐9 positions of fluorene unit were synthesized. Their thermal, photophysical, electrochemical, and electroluminescent (EL) properties were investigated. Among these 2,7‐PF derivatives (P 1 –P 4 ), P 2 and P 3 exhibited higher photoluminescence efficiency in dichloromethane and better EL properties in the single‐emissive‐layer polymer light‐emitting devices. The highest brightness of 3888 cd/m² and the maximum current efficiency of 2.9 cd/A were obtained in the P 2 ‐ and P 3 ‐based devices, respectively. The maximum brightness and efficiency levels were 1.7 and 2.1 times, respectively, higher than the corresponding levels from the parent 2,7‐PF derivative (P 1 )‐based devices. Our work indicated that EL properties of 2,7‐PF derivatives can be improved by introducing the blue‐emitting iridium complex into the alkyl side chain of fluorine unit as pendant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012