Characterization of ZnO:AI films deposited by r.f.magnetron-sputtering at low temperature

Transparent conducting ZnO:AI thin films with good adhesion and Iow resistivity have been prepared on organic substrates and Coming 7059 glass substrates by r.f. magnetron-sputtering technique at Iow substrate temperature (25-210℃). Structural and photoelectric properties of the deposited films are investigated. The deposited films are polycrystalline with hexagonal structure and a preferred orientation with the c-axis perpendicular to the substrate. Only the (002) peak is observed.High quality films with resistivity as Iow as 1.0 x 10- 3Ω@ cm and 8.4 x 10- 4Ω@ cm, the average transmittance over 74% and 85% in the wavelength range of the visible spectrum have been obtained on different substrates.     

High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

高电荷态Ar^q＋与Ne碰撞中入射离子电荷交换截面的研究

报道Ar^q Ne(q=8，9，11，12)碰撞体系中多电子转移过程，得到了多组实验测量电荷交换截面数据，讨论入射离子电荷交换截面、反冲离子产生截面与入射离子电荷态、能量以及散射离子电荷态的关系，并且将实验结果与Ar^q Ar碰撞体系进行对比研究。在修正分子库仑过垒模型的基础上，对实验现象做了合理的解释。     

等电荷态离子与He原子碰撞中的转移电离过程研究

采用位置灵敏探测和飞行时间技术测量了等电荷态离子C^q 、N^q 、O^q 、Ne^q (q=4，5，6，7)与He原子碰撞中，转移电离截面与单电子俘获截面的比值Ro研究了相同q入射的情况下，R与入射离子核电荷数Z的依赖关系。在统计蒸发模型的基础上对实验结果进行了解释。     

退火温度对低温生长MgxZn1－xO薄膜光学性质的影响

用射频磁控溅射法在80℃衬底温度下制备出Mg_xZn_1-xO(x=0.16)薄膜，用X射线衍射(XRD)、光致发光(PL)和透射谱研究了退火温度对Mg_xZn_1-xO薄膜结构和光学性质的影响.测量结果显示，Mg_xZn_1-xO薄膜为单相六角纤锌矿结构，并且具有沿c轴的择优取向；随着退火温度的升高，(002)XRD峰强度、平均晶粒尺寸和紫外PL峰强度增大，(002)XRD峰半高宽(F 关键词： xZn_1-xO薄膜')" href="#">Mg_xZn_1-xO薄膜 射频磁控溅射 退火     

三倍频激光等离子体X射线转换研究

利用“星光Ⅱ”高功率激光装置三倍频激光（波长０.３５μｍ,能量５—９０Ｊ,焦斑直径约２００μｍ,脉冲宽度４００—８００ｐｓ）辐照多种材料（Ｃ,Ａｌ,Ｃｕ,Ａｕ）靶,对于不同激光功率密度,研究软Ｘ射线转换和发射能谱．结合０.３５μｍ激光辐照Ａｌ靶的质量烧蚀率和等离子体喷射速度与激光功率密度的定标关系进行数值模拟,对于激光功率在１０^１３—１０^１５Ｗ／ｃｍ²理论模拟结果与实验结果符合得很好 关键词：     

红壤中痕量五氯酚的气相色谱法测定

五氯酚因其对生物体的广谱毒性和诱突变性，被我国和其他许多国家列为环境优先监测的持久性有机污染物之一。它在红壤地区曾广泛大量的使用，给环境造成一定的负面影响。本文探讨了应用超声波萃取、乙酸酐衍生化和气相色谱／电子捕获检测器(GC／ECD)测定红壤中痕量五氯酚的方法，并对不同的影响因素进行了对比，确定了一种较可靠的方法。该法的回收率为89％-101％。     

超薄泡沫铜对流动沸腾的强化换热特性

由于传热系数高、温度均匀性好及工质需求量少,微通道沸腾冷却成为极具前景的冷却方式。本文主要以烧结超薄泡沫铜为研究对象,以去离子水为工质,探讨孔隙率、入口温度和质量流率对沸腾换热特性进行研究。实验表明,增加流量和降低入口过冷度都可提升泡沫铜的换热性能。超薄泡沫铜孔隙率越高,其换热性能越好,高孔隙率泡沫铜换热性能比较优越,超薄泡沫铜两相换热系数提升约30%。     

Size-dependent optical properties and carriers dynamics in CdSe/ZnS quantum dots

Size-dependence of optical properties and energy relaxation in CdSe/ZnS quantum dots （QDs） were investigated by two-colour femtosecond （fs） pump-probe （400/800 nm） and picosecond time-resolved photoluminescence （ps TRPL） experiments. Pump-probe measurement results show that there are two components for the excited carriers relaxation, the fast one with a time constant of several ps arises from the Auger-type recombination, which shows almost particle sizeindependence. The slow relaxation component with a time constant of several decades of ns can be clearly determined with ps TRPL spectroscopy in which the slow relaxation process shows strong particle size-dependence. The decay time constants increase from 21 to 34 ns with the decrease of particle size from 3.2 to 2.1 nm. The room-temperature decay lifetime is due to the thermal mixing of bright and dark excitons, and the size-dependence of slow relaxation process can be explained very well in terms of simple three-level model.     

基于多元局部多项式方法的混沌时间序列预测

根据Takens定理，把混沌时间序列构造为一组序列对，然后用多元局部多项式方法来预测其序列.这种核估计方法可以结合局域法与全局法的优点，使得预测的精度更高.仿真结果表明，该方法非常有效.