悬链线竖向集中力作用下的构形分析和张力计算

目前,悬链线在竖向集中力和均布荷载共同作用下的构形分析和受力计算的理论仍不完善。针对这一问题,通过引入悬链线的几何约束方程、力平衡方程和超越方程,建立了竖向集中力与均布荷载共同作用下的非线性方程组。采用牛顿迭代法求解方程组,得到了悬链线的构形和受力情况。为了验证理论计算的正确性,进行了算例和试验验证。结果表明,算例的计算结果与文献结论保持一致,试验测得的构形和水平张力大小与理论计算的构形和水平张力大小吻合较好。本文的理论计算可以更加简单精确地计算出悬链线在竖向集中力和均布荷载共同作用下的构形和受力情况,为实际工程提供重要的理论指导。     

衰减匹配的超声Barker码激励方法

为增加超声穿透高声衰减介质的能力,提出了一种衰减匹配的超声Barker码激励方法。基于换能器高斯响应与材料非频散线性衰减的假设,得到了Barker码激励的信号模型,求解旁瓣抑制滤波后脉冲压缩的信噪比表达式可知,该方法仅需要根据材料衰减特性与轴向分辨率的要求,分别调整Barker码的中心频率与时长,便可以获得更高的信噪比。取衰减系数为1.4 Np/(MHz·cm)、厚度为5 cm的橡胶为试样进行验证。当与方波激励方法的轴向分辨率相近时,衰减匹配的Barker码激励方法比传统Barker码激励方法的信噪比增益提高接近5 dB;当牺牲一定轴向分辨率时,信噪比增益提高接近11 dB。结果表明,衰减匹配的Barker码激励方法可以降低依频率衰减对脉冲压缩的影响,有效提高衰减回波的信噪比。      

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

ZrO2晶型对CO加氢制异丁烯反应影响的研究

不同晶型结构的ZrO₂在CO加氢制异丁烯反应中表现出不同的催化性能。尽管单斜相ZrO₂在合成气制异丁烯反应中具有最优异的催化性能,但是对于其异构化活性位仍缺乏深入认识。通过研究ZrO₂晶型结构对反应性能的影响差异,有利于深入认识ZrO₂催化剂上合成气制异丁烯反应的关键影响因素。因此,本研究制备了一系列不同晶型结构的ZrO₂催化剂,研究了它们在结构性质及催化CO加氢制异丁烯反应性能方面的差异。相对于四方相和无定型ZrO₂,在单斜相ZrO₂催化剂表面,有较多的配位不饱和的Zr位点和O位点。配位不饱和的Zr位点是CO吸附活化的位点,有利于CO的转化。而较多的不饱和配位的O位点,为异丁烯的生成提供了更多的碱性位。此外,在单斜相ZrO₂催化剂表面,配位不饱和的Zr位点和O位点的存在,抑制了电子向反应中生成的甲酸盐物种转移,因此,甲酸盐物种在催化剂表面吸附较弱,有利于CO加氢生成异丁烯。     

Preparation and application of novel polymer nanoparticles in the detection of copper ion and cysteineEI北大核心CSCD

A novel amphiphilic copolymer,dipropenoxystyrene anthracene and acrylic acid copolymer（BASA-AA） was designed and synthesized based on divinyl anthracene. The polymer self-assembled rapidly in water to create polymer nanoparticles（BASA-AA NPs）with a uniform size of 45 nm,no dye leakage,and great brightness（Φ= 36%）. Because of the enormous number of carboxyl groups on the surface of the particles,it can disperse extremely well in water,and can be used for the rapid detection of copper ion and cysteine（Cys）in pure water, with the limit of detection of 45 nmol/L. The fluorescent intensity of the nanoparticles will be greatly reduced after the introduction of copper ion,realizing the detection of copper ion with high selectivity and sensitivity. A composite probe made of BASA-AA NPs and copper ion can detect Cys in the range of 0.1-10 µμmol/L,with the detection limit of 84 nmol/L,due to the high binding capacity of the sulfhydryl group and copper ion. The method is simple and rapid in material synthesis and preparation,and shows high selectivity and sensitivity in pure water. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Si内标-X射线衍射法定量测定铁矿中Fe3O4、Fe2O3和SiO2

铁矿物相的准确定量对矿物价值评价及选冶工艺研究有重要作用,现有化学法流程复杂效率低,X射线衍射全谱拟合法可溯源性差,结果准确性难以评价和验证。本研究建立了以Si为内标,以Cu靶X射线为辐射光源,步进扫描方式获得衍射谱图,以待测相含量为横坐标,待测相与内标相峰面积比值为纵坐标建立校准曲线,以曲线对铁矿中Fe3O4、Fe2O3和SiO2物相进行定量的方法。试验对制样条件、扫描参数、内标物选择、积分方式、重叠峰校正等进行了优化选择,结果表明,试样全部通过45 μm标准筛,Si内标比例为10%,步进长度0.01°,步进时间30S,选择对Fe3O4（311）、Fe2O3（104）、SiO2（011）和Si（111）的衍射峰进行积分强度计算,可获得最优结果。在选定工作条件下,Fe3O4在1.07～100%范围内线性相关系数(R2)为0.9953,相对标准偏差(RSD)1.1%～13.2% (n=6),加标回收率99.7 %~114.8 %,检出限(LOD)4.29%;Fe2O3在1.51～100%范围内线性相关系数(R2)为0.9991,相对标准偏差(RSD)2.8%～10.6% (n=6),加标回收率87.1%~112.2%,检出限(LOD)2.56%;SiO2在0.79～29.72 %范围内线性相关系数(R2)为0.9957,相对标准偏差(RSD)3.2%～10.3% (n=6),加标回收率86.6%~98.9%,检出限(LOD)0.68%。方法易溯源、准确性易评价和验证,适合开展标准化检测和应用。     

Charge Transfer Properties of Organic Semiconductor Molecules of Perylene Derivatives

The charge transfer rates of perylene and its four derivatives were studied at the level of B3LYP/6-31G** by density functional theory. The results showed that the perylene and its four derivatives belonged to the semiconductor molecules, which released energy when electron was injected. Therefore, they were suitable to be used as the electron injection material. The introduction of OH group can improve the electron transfer rate significantly. The formations of intramolecular hydrogen bonds were unfavorable to the hole transfer, but conducive to the electron transfer. The perylene derivatives, 2,5-3,4,5-(trifluorophenyl)ethynyl-8,11-3,4,5-trihydroxyphenyl ethynyl, designed in this article had the hole transfer rate of 1.57 cm2/V·s-1. Therefore, this kind of material will be potential hole transfer material with high transfer efficiency.     

激光驱动的多层膜复合靶M带辐射光谱研究

时间分辨X射线吸收精细结构谱技术需要产生高亮度、均匀、宽光谱的X射线源。单一靶材产生的M带辐射源亮度高,但均匀性较差,因此提出了一种使用多种金属材料制备的多层膜复合靶产生M带辐射的方案。针对Si的K边X射线吸收谱实验,根据前期单一靶材M带光谱实验数据理论计算了最优的材料比例,制备了Au、Yb、Dy三种材料组成的多层膜复合靶,并在神光II激光装置上开展了脉冲激光驱动的多层膜复合靶辐射光谱测量,实验结果和理论计算基本一致。相比单一靶材,多层膜复合靶产生的M带辐射源具有光谱宽、整体亮度均匀的优点,在时间分辨X射线吸收精细结构谱中具有较大的应用潜力。     

木质素β-O-4单元的光化学和电化学降解:醚键断裂反应的一种应用*

醚键断裂反应既是有机化学的重要教学内容,又在现实世界中具有广泛应用。木质素是一类重要的生物质资源,其降解核心为碳-氧键断裂反应体系,具有重要的研究价值。对木质素β-O-4单元利用光化学和电化学降解的最新科研进展进行总结,可为醚键断裂反应的教学提供应用案例,拓展学生科学视野。     

酶消解-单颗粒电感耦合等离子质谱法测定农产品中纳米铂颗粒

铂纳米颗粒在汽车行业中被广泛用作汽车尾气催化剂。随着铂纳米颗粒在工业生产中的广泛应用,它在环境中广泛分布并可能从植物累积进入食物链中。因此,建立一种在农产品中的定量分析方法是至关重要的。以酶消解的前处理方法结合单颗粒-电感耦合等离子体质谱法(Single particle ICP-MS,SP-ICP-MS)测定农产品中纳米铂颗粒(PtNPs)粒径分布及颗粒数量浓度。通过优化前处理提取条件,当Macerozyme R-10酶为10 mg、柠檬酸缓冲溶液浓度为5 mmol/L、提取时间36 h时,农产品中PtNPs提取效果较高。PtNPs粒径检出限为20 nm,颗粒浓度检出限为5×10⁵ particle/L,铂颗粒浓度回收率在(81±3)%~(91±4)%,加标后平均粒径(41±3)~(47±2)nm,与50 nm PtNPs标准溶液粒径接近。方法操作简单、检出限低、准确度高,适用于农产品中PtNPs定量分析,为客观评价农产品铂纳米毒性效应提供可靠的分析技术。