广义神经传播方程的整体吸引子

使用Galerkin方法,结合Sobolev空间理论和不等式技巧,给出了广义神经传播方程解的存在唯一性定理,然后利用吸引子存在性定理,采用半群方法证明了方程整体吸引子的存在性.     

基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

给定度序列图的覆盖成本和反向覆盖成本的研究

具有n个顶点且度序列为(m,2,…,2,1,…,1)(1的重数为m)的连通图不止一个(这些图均为树),而每个树对应唯一一个段序列(l₁,l₂,…,l_m).通过对任意一树移动最长段的悬挂点到最短段悬挂点的方式得到另一树,比较前后两树的覆盖成本和反向覆盖成本,给出了具有最小覆盖成本和反向覆盖成本的极树,并且进一步给出了取得最小覆盖成本和反向覆盖成本的顶点.     

Enhanced dielectric and nonohmic properties of SrTiO3-modified CaCu3Ti4O12 ceramics

Dielectric and nonohmic properties of CaCu₃Ti₄O₁₂ (CCTO) ceramics can be modified by addition of SrTiO₃ (STO) in different molar proportions which were fabricated by a modified sol-gel method. XRD results indicated that all modified ceramics showed mixed phase consisting of both CCTO and STO. SEM images and grain size distribution probability also presented the change of microstructure with the addition of STO. The dielectric loss of the CCTO/0.4STO ceramics sintered at 1000 °C can be lower than 0.02 in a wide frequency (1 kHz–10 kHz), especially at 1 kHz, the dielectric loss of this sample is as low as 0.012. Furthermore, excellent nonlinear I–V electrical characteristic (high breakdown voltage to 54.15 kV/cm for CCTO/0.4STO sintered at 1000 °C) was observed as well. All the results indicated that the addition of STO does improve the dielectric properties and nonohmic characteristics of CCTO ceramics dramatically.     

LAMOST光谱J152238.11+333136.1 P-Cygni轮廓分析

LAMOST一期巡天成功获取河外星系光谱超过150 000条,大样本光谱数据为探索奇异、稀有的天体从而完善现有的天体演化理论提供了必要的数据条件;而先进的信息技术为从海量的数据中挖掘这些珍稀样本提供了有效途径。针对采用基于DoPS的数据挖掘方法,从LAMOST DR5星系光谱数据获得的离群数据挖掘结果中,呈现出疑似P-Cygni轮廓特征的光谱J152238.11+333136.1进行了深入讨论。首先针对该光谱的基本信息、疑似P-Cygni轮廓特征以及相应的离群数据挖掘方法进行了简要表述,光谱在Hβ和[OⅢ]λ4860处呈现P-Cygni轮廓,在NeⅢλ3869和HeⅠλ5874处呈现反P-Cygni轮廓;其次,对该特征的真实性及其生成机制从以下4个角度展开讨论。(1)交叉同源观测。Sloan巡天2004年(相差11年)的同源观测,其光谱上并未呈现对应的特征,据推测可能是正在进行的演化活动或者光纤定位误差所致;(2)通过分析光谱质量、减天光残差等方法,分析P-Cygni特征是否为观测或数据处理所致。NeⅢλ3869和HeⅠλ5874处呈现反P-Cygni轮廓可信度较低;同时,通过比较目标光谱与超级天光,以及相邻光纤观测到的光谱在对应波长处的光谱特征,说明存在P-Cygni轮廓为减天光过程导致的可能性;(3)光谱子型差异。IRAS和WISE等近红外同源观测,显示其为Seyfert 2型星系,光学波段发射线强比[NⅡ]/Hα,[OⅢ]/Hβ显示其为HⅡ区,结合光学、红外测光图像特征,推测目标可能是两个星系进行并合活动;(4)从导致P-Cygni轮廓的物理机制的角度,分析了由星系并合触发外流、由恒星形成(爆发)电离气体触发的外流以及由Wolf-Rayet特征星系的超星风等原因引起的可能性。     

Zn–Co Sulfide Microflowers Anchored on Three-Dimensional Graphene: A High-Capacitance and Long-Cycle-Life Electrode for Asymmetric Supercapacitors

Zinc–cobalt double-metal sulfides (ZCS) as Faradic electrode materials with high energy density have great potential for supercapacitors, but their poor transfer efficiency for electrons and ions hinders their electrochemical response. Herein, ZnCo₂(CO₃)_1.5(OH)₃@ZCS microflower hybrid arrays consisting of thin nanolayer petals were anchored on three-dimensional graphene (ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG) by a simple hydrothermal method and additional ion-exchange process. A ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode delivered high capacitance (2228 F g⁻¹ at 1 A g⁻¹) and long cycling life (85.7 % retention after 17 000 cycles), which are ascribed to the multicomponent structural design. The 3DG conductive substrate improves the electron-transfer dynamics of the electrode material. Meanwhile, the microflowers consisting of thin nanolayer petals could not only provide many active sites for ions to improve the capacitance, but also alleviate the volume expansion to ensure the structural stability. Furthermore, an all-solid-state asymmetric supercapacitor based on a ZnCo₂(CO₃)_1.5(OH)₃@ZCS/3DG electrode achieved a high energy density of 27 W h kg⁻¹ at 528.3 W kg⁻¹ and exhibits exceptional cyclic stability for 23 000 cycles. Its ability to light a blue LED for 9 min verified the feasibility of its application for energy storage devices.     

Surface Modification of Cu-SSZ-13 with CeO2 to Improve the Catalytic Performance for the Selective Catalytic Reduction of NO with NH3

Kinetics and Catalysis - A series of Cu-SSZ-13@CeO2 catalysts with surface modification with CeO2 was prepared by the modified self-resemble method based on the one-pot synthesized Cu-SSZ-13...     

Stochastic chemo-physical-mechanical degradation analysis on hydrated cement under acidic environments

The accumulation of material degradation under contact with aggressive aqueous environments could lead to reduced structural reliability. In terms of hydrated cementitious materials, such interactions often result in the chemo-physical-mechanical (CPM) degradation, which represents a multiphysics process of high non-linearity and complexity. By further considering the inevitable uncertainties associated with both the materials and the serving conditions, solving such a process requires novel probabilistic approaches. This paper presents a stochastic chemo-physical-mechanical (SCPM) degradation analysis on the hydrated cement under acidic environment. The SCPM analysis consists of modelling the stochastic chemophysical degradation by finite element method, and assessing the mechanical deterioration through analytical micromechanics. The proposed modelling framework couples the conventional Monte Carlo Simulation with a novel support vector regression algorithm. The present method is able to not only address the detailed degradation mechanisms, but also ensure low computational costs for an accurate SCPM degradation assessment.