Dynamic stability of a class of fractional-order nonlinear systems via fixed point theory

In this paper, the problem of the uniform stability for a class of fuzzy fractional-order genetic regulatory networks with random discrete delays, distributed delays, and parameter uncertainties is studied. Although there is a portion of literature on using fixed point theorems to study the stability of fractional neural networks, most of them required the fractional order to be in $\left(\frac{1}{2},1\right)$. However, the case of the fractional-order belonging to $(0,\frac{1}{2})$ has not been discussed. To solve it, this work proposes a novel idea of using fixed point theory to study the stability of fuzzy (0,1) order neural networks, the problem of the uniqueness of the solution of the considered genetic regulatory networks is resolved, and a novel sufficient condition to guarantee the uniform stability of above genetic regulatory networks is also derived. Eventually, an example is given to demonstrate that the obtained result is effective.     

自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

Polymeric Carbon Nitride-based Single Atom Photocatalysts for CO2 Reduction to C1 Products

Photocatalytic CO₂ reduction to C₁ fuels is considered to be an important way for alleviating increasingly serious energy crisis and environmental pollution. Due to the environment-friendly, simple preparation, easy formation of highly-stable metal-nitrogen(M-N_x) coordination bonds, and suitable band structure, polymeric carbon nitride-based single-atom catalysts(C₃N₄-based SACs) are expected to become a potential for CO₂ reduction under visible-light irradiation. In this review, we summarize the recent advancement on C₃N₄-based SACs for photocatalytic CO₂ reduction to C₁ products, including the reaction mechanism for photocatalytic CO₂ reduction to C₁ products, the structure and synthesis methods of C₃N₄-based SACs and their applications toward photocatalytic CO₂ reduction reaction(CO₂RR) for C₁ production. The current challenges and future opportunities of C₃N₄-based SACs for photoreduction of CO₂ are also discussed.     

Scalable Quantum Controlled Gates on Single-Photon Polarization Qubits Assisted by Nitrogen-Vacancy Centers Inside Single-Sided Optical Cavities

International Journal of Theoretical Physics - Quantum logic gates are the foundation of circuit-based quantum computation and quantum simulation. Multi-qubit quantum controlled gates are of vital...     

化学势依赖于系统内的所有物质

在热力学中，关于多元系的化学势的变量集，有互不一致的两种结论.一种结论认为，某种物质的化学势，仅仅依赖于其它物质的存在，另外一种认为，不仅依赖于其它物质，也依赖于自己.本文通过详细的分析论证了，一般而言，化学势依赖于系统内的所有物质.     

The induction of PANoptosis in KRAS-mutant pancreatic ductal adenocarcinoma cells by a multispecific platinum complex

Science China Chemistry - Oncogenic KRAS reprograms pancreatic ductal adenocarcinoma (PDAC) cells to a state that is awfully resistant to apoptosis. An alternative coping strategy is to trigger a...     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

LaNi0.5Co0.5O3催化剂对甲烷二氧化碳干重整反应在CO2渗透膜反应器中的影响

制备了混合导体膜反应器,通过电化学方法捕获CO2,并将其用于甲烷二氧化碳干重整反应中.采用XRD, SEM,TPR等技术系统研究了LaNi0.5Co0.5O3催化剂在膜反应器中对甲烷二氧化碳干重整反应的影响.结果表明:LaNi0.5Co0.5O3催化剂在甲烷干重整反应中能原位析出纳米金属Ni和Co,对反应起到了较好的催化作用,同时抑制了积碳.催化剂还具有良好的氧化还原性能,可以循环利用.     

无需热处理高炉渣微晶玻璃的制备与表征

采用熔融法熔制具有金色星点的微晶玻璃,制备过程无需热处理.利用DSC-TG、XRD、SEM、EDS、TEM、BSE、FTIR和热膨胀研究该微晶玻璃配合料的高温熔制过程和不同熔制温度、保温时间对微晶玻璃晶体含量、显微结构和性能的影响.研究表明:配合料在850℃生成钙铝黄长石晶体并在1010℃逐渐转变为辉石,配合料在1200℃时大量熔化,仅含有熔点较高的正方铬铁矿石,随着温度的升高,正方铬铁矿溶解,玻璃液中析出绿铬石晶体;晶体含量随着熔制温度的升高而减少,随着保温时间的延长而增加.