Triostin A Derived Cyclopeptide as Architectural Template for the Alignment of Four Recognition Units

The DNA bisintercalator triostin A is structurally based on a disulfide-bridged depsipeptide scaffold that provides preorganization of two quinoxaline units in 10.5 Å distance. Triostin A analogues are synthesized with nucleobase recognition units replacing the quinoxalines and containing two additional recognition units in between. Thus, four nucleobase recognition units are organized on a rigid template, well suited for DNA double strand interactions. The new tetra-nucleobase binders are synthesized as aza-TANDEM derivatives lacking the N-methylation of triostin A and based on a cyclopeptide backbone. Synthesis of two tetra-nucleobase aza-TANDEM derivatives is established, DNA interaction analyzed by microscale thermophoresis, cytotoxic activity studied and a nucleobase sequence dependent self-aggregation investigated by mass spectrometry.     

固体微/纳米尺度传热理论研究进展

随着半导体技术的飞速发展,器件的尺寸已进入到微/纳米尺度。由于量子效应、表面及界面效应,使得微尺度下的热物性与宏观尺度下有了明显的区别。人们针对微观传热领域的特点,发展了声子玻尔兹曼传输方程、分子动力学等方法,取得了一定的成果,但仍存在不少问题。一些基础概念问题,特别是非平衡态下的局域温度的定义,有待澄清。本文主要回顾近年来微/纳米尺度传热在理论和数值模拟方面的进展,以及目前所面临的挑战和问题。     

纳米金属氧化物粉体爆轰合成

对含能前驱体如硝酸盐和控制炸药装药的情况下爆轰反应生成纳米金属氧化物进行了探索研究。采用透射电子显微镜表征了爆轰产物。氧化物爆轰产物中的碳微粒即爆轰灰在某种意义上反映了晶型生长机制。通过爆轰合成技术产生的氧化物肯定了纳米粉体爆轰合成技术的有效性。介绍了纳米氧化铝的制备,测试了氧化铝的微观结构和分布状态。结果表明:通过硝酸盐炸药的爆轰产生了纳米尺度的金属氧化物,球形氧化铝粒径主要分布于20~50 nm之间。该方面研究工作的开展也将促进在细微观尺度上的工业炸药设计和爆轰理论的发展。     

纳微尺度铜金属有机框架催化过氧化氢氧化异丁香酚

通过水热法及沉淀法,合成了纳微尺度铜金属有机框架催化剂。 通过FT-IR、TG及TEM等技术手段对其性能和结构进行了表征。 系统考察了催化剂、溶剂种类及用量、反应时间等因素对异丁香酚氧化制备香草醛的影响。 结果表明,用均苯三甲酸根(BTC)作配体时制备的催化剂Cu-BTC性能较佳。 以Cu-BTC为催化剂、30%(质量分数)H₂O₂为氧化剂、乙腈为介质,当n(异丁香酚):n(H₂O₂)=1:2.4时,50 ℃,反应8 h,异丁香酚转化率为94.4%,香草醛产率达到81.8%。 纳微尺度(粒径30~300 nm)Cu-BTC催化剂体现了良好的重复使用性能,连续反应5次,异丁香酚转化率保持在90%左右。     

定性检验牛奶中的营养素

利用常用仪器、微型实验和相应物质的特征反应,对牛奶中所含营养素进行定性检验,结果表明：牛奶中含有蛋白质、维生素、钙、镁、磷、钾、铁元素。该实验具有微型化、绿色化、简约化和生活化的特质。     

微型通风橱

简单介绍设计的微型通风橱在处理有毒气体上的应用,使有毒气体参与或产生的反应更环保。     

Carbon nanotube-epoxy composites: The role of acid treatment in thermal and electrical conductivity

Wet acid oxidation treatment methods have been widely reported as an effective method to purify and oxidize the surface of industrial multi-walled carbon nanotubes. This work examines the use of a concentrated HNO₃/H₂SO₄ mixture in an attempt to optimize the purification procedure of industrial multi-walled carbon nanotubes with diameter distribution statistics. It is shown that acid treatments of several hours are enough to purify the nanotubes. The electrical and thermal conductivities of epoxy composites containing 0.05–0.25 wt% of an acid-treated multi-walled carbon nanotube have been studied. The electrical conductivity of the composites decreases by more than three orders, whereas the thermal conductivity of the same specimen increases very modestly as a function of the filler content.     

脉冲激光加热薄膜微尺度热传递研究进展

短脉冲激光显微微加工因其具有制作高精度微结构的能力和其在现代微制作技术中的应用,微尺度薄膜热传递的研究受到极大关注,近年来对薄膜结构高频加热的研究迅猛发展。本文对十年来薄膜微尺度热传递的相关研究进展做了简要评述。