Synthesis of Au nanorods via autocatalytic growth of Au seeds formed by sonochemical reduction of Au(I): Relation between formation rate and characteristic of Au nanorods

The sonochemical formation of Au seeds and their autocatalytic growth to Au nanorods were investigated in a one-pot as a function of concentration of HAuCl₄, AgNO₃, and ascorbic acid (AA). The effects of ultrasonic power and irradiation time were also investigated. In addition, the formation rate of Au nanorods was analyzed by monitoring the extinction at 400 nm by UV–Vis spectroscopy and compared with the growth behavior of Au seeds to nanorods. Most of the reaction conditions affected the yield, size, and shape of Au nanorods formed. It was confirmed that the concentration balance between HAuCl₄ and AA was important to proceed the formation of Au seeds and nanorods effectively. The formation rate became faster with increasing AA concentration and dog-bone shaped nanorods were formed at high AA concentration. It was also confirmed a unique phenomenon that the shape of Au nanorods changed even after the completion of the reduction of Au(I) in the case of short-time ultrasonic irradiation for Au seed formation.     

Analysis on X-Ray Laser Generation with EM-Wave Wiggler

The possibility of realizing SASE Free Election Laser in x-ray waveband with EM-wave wiggler is studied in this paper. SASE effect including saturation length, saturation power and nonlinear process is explored through a 3-D simulation code. A utilization of seed light from laser plasma x-ray is also analyzed, which demonstrates the feature of shortening the interaction length for saturation. The results show that sizeable output power of x-ray laser would be generated with a middle energy electron beam.     

Mono-dispersed cross-linked polystyrene micro-spheres prepared by seed swelling polymerization method

A two-step swelling procedure was adopted to synthesize mono-dispersed and highly cross-linked poly (St-divinylbenzene) particles with PSt micro-spheres (1.80 μm in diameter). The PSt micro-spheres were prepared by a dispersion polymerization method and used as seeds. The effects of monomer concentration, ratio of ethanol to water, swelling reagents, crosslinking reagents, swelling temperature and agitation speed on particle size were investigated in detail. The morphologies and size distributions of these micro-spheres were examined by SEM and particle size analysis (PSA). The T _g of the micro-spheres was measured by DSC. The results indicate that the particles (6.20 μm in diameter) exhibit excellent mono dispersed property and high crosslinking degree when the concentration of the swelling reagent was 25%, the concentration of the crosslinking reagents was 23%, the swelling temperature was 30°C and the stirring speed was 150 r/min. __________ Translated from Chinese Journal of Applied Chemistry, 2007, 24(11): 1289–1294     

新疆野生黑加仑与马林果实的营养成分分析

通过对新疆野生黑加仑和野生马林的脂肪油，8种微量元素，17种氨基酸以及维生素C的含量进行测定得出：黑加仑脂肪油含量为17．9％，马林的脂肪油含量为22．3％，其中，黑加仑脂肪油中，r－亚麻酸的含量为19．02％，而马林中，其含量为9．40％，黑加仑中K，Na,Ca,Cu,Zn,Fe的含量比马林中的含量高，而Mn,Mg元素的含量却比马林含量低；马林的维生素C含量为16．22mg/g，黑加仑的含量为108mg/g，黑加仑的氨基酸的总量为1．63％，马林为1．14％。     

(Ni0.81Fe0.19)1-xCrx作为种子层对NiFe/FeMn交换偏置的影响

采用一种新的种子层材料:(Ni081Fe019)1-xCrx,通过改变种子层中Cr原子的含量,使得在其上生长的NiFeFeMn双层膜的织构和晶粒尺寸产生极大的差异,系统研究了NiFeFeMn双层膜中FeMn晶粒尺寸和织构对交换偏置的影响.实验结果表明,在FeMn的γ相(111)织构较好的前提下,交换偏置场的大小与织构的差异没有关系;FeMn的晶粒尺寸对交换偏置场有很大影响,较小的反铁磁层晶粒对交换偏置场有利,过大的反铁磁层晶粒不利于交换偏置场.将(Ni081Fe019)05Cr05与传统的种子层材料Ta进 关键词： 交换偏置 晶粒尺寸 织构 种子层     

预测气吹精密播种机排种质量的一种简易方法

通过对气吹式精密播种机田间试验资料的相关分析，发现合格指数Ａ与｜Ｄ－Ｍ｜（重播指数与漏播指数之差的绝对值）之间里极显著负相关（ｒ＝－０．９３１２）。在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。     

SB粉水热种分过饱和铝酸钠溶液制备拟薄水铝石

A novel hydrothermal process for preparation of single-phase pseudoboehmite from supersaturated sodium aluminate solution with SB pseudoboehmite seed was presented. The process is characterized by precipitation for 3 h at temperature around 125 ℃ with a seed ratio of 1.0. Precipitation yield of Al₂O₃ over 20% could be reached and the specific surface area of precipitated products almost as high as SB seed could be obtained. The process suitable for preparing pseudoboehmite with any pseudoboehmite seed in principle comprises a highly variation of the current Bayer process and the latest boehmite process for the production of smelter grade alumina.     

栀子油脂中脂肪酸的GC/MS分析

本文介绍了栀子油脂中脂肪酸的气相色谱-质谱-计算机联用分析方法。栀子油脂中脂肪酸组成较为简单,主要以软脂酸(38.0%)和亚油酸(53.4%)为主,营养价值高,具有开发利用的价值。     

晶种诱导Nonasil(HMI)的合成

以不同分子筛(Nonasil, MCM-22或MCM-49)为晶种, 在水热条件下以六亚甲基亚胺(HMI)为模板剂, 对纯硅沸石Nonasil(HMI)的合成进行了研究. 并且对各种合成参数, 包括晶种类型、硅源、晶化温度和Na+浓度等对Nonasil(HMI)合成的影响进行了探讨. 发现在适量的Na+存在条件下, 晶种的引入大大缩短了晶化时间; 不同类型的晶种对晶化速度有不同程度的提高. 特别是用异类晶种(如MCM-22或MCM-49)能够合成高结晶度的Nonasil(HMI).     

Some theoretical aspects on morphology development in seeded composite latexes. I. Batch conditions below monomer saturation

In seeded emulsion polymerization, during the second stage, new interfaces appear and the surface area changes. A thermodynamic equilibrium approach is presented which predicts particle morphology of a whole range of non-spherical particles upon polymer conversion. Simulation takes into account swelling ratio, molar volumes and interfacial tension. As the particle geometry is complex, a new mathematical procedure is detailed.The computed data are useful to discuss either the stability or the instability of the particles morphology. These results must be compared with actual experimental structures.Abreviations and symbols G Gibbs' free energy - reduced Gibbs' free energy - _i interfacial tension - ₁₂ interfacial tension between polymer 1 and polymer 2 - _1w interfacial tension between polymer 1 and water - _2w interfacial tension between polymer 2 and water - r ₁ polymer 1 swollen by monomer 2 sphere radius - r ₂ polymer 2 swollen by monomer 2 sphere radius - r _i interfacial radius - h ₁ sphere 1 distance to minimal section - h ₂ sphere 2 distance to minimal section - h _i interfacial sphere distance to minimal section - sign ofh _i, positive when the interface sphere is on the side of the sphere 2, negative when the interface sphere is on the side of the sphere 1 - A ₁₂ surface between polymer 1 and polymer 2 - A _1w surface between polymer 1 and water - A _1w ⁰ surface between polymer 1 and water before polymerization - A _2w surface between polymer 2 and water - v ₁ volume of the polymer 1 swollen by monomer 2 - v _i volume of the polymer 1 swollen by monomer 2 before polymerization - v ₂ volume of the polymer 2 swollen by monomer 2 - V _p1 polymer 1 molar volume - V _p2 polymer 2 molar volume - V _m2 monomer 2 molar volume - n _p2 polymer 2 number of mole - n _p1 polymer 1 number of moles - n _m21 monomer 2 number of mole in the swollen polymer 1 - n _m22 monomer 2 number of mole in the swollen polymer 2 - n _m2 monomer 2 total number of mole - n _m2 monomer 2 number of mole before polymerization - TGn ₁ polymer 1 swelling rate - TGn ₂ polymer 2 swelling rate - TGn _i maximum number of mole of monomer 2 in polymeri by mole of polymeri - x polymer 2 conversion rate - K, p, q mathematical variables - D, r, a mathematical variables