Modeling of process intensification of biodiesel production from Aegle Marmelos Correa seed oil using microreactor assisted with ultrasonic mixing

Conventionally, the batch type reactors were used for the production of biodiesel. However, in recent years, the usage of microreactors has started emerging as a significant substitute for biodiesel production due to its higher conversion rate at a short duration. These microreactors have a significantly high surface to volume ratio and high heat-mass transfer rate. The disadvantage of this type of reactors is its low mixing rate of the reagents. This can be overcome with the assistance of ultrasonic mixing. The main objective of this paper is to study the interlaced effect of a continuous flow microreactor and ultrasonic mixing on trans-esterification of Aegle Marmelos Correa seed oil using sodium methoxide catalyst. Results of microreactors with 0.3 mm and 0.8 mm diameter were compared. The effects of process parameters namely, flow rate (2–10 mL/min), reaction temperature (45–65 °C), catalyst amount (0.5–2.5 wt%), oil to methanol molar ratio (1:6–1:18) and ultrasonic mixing time (30–150 s) were studied using response surface methodology (RSM). The biodiesel yield of 98% and 91.8% were obtained for 0.3 mm and 0.8 mm microreactors, respectively. The maximum biodiesel yield observed in 0.3 mm reactor under following optimum conditions: 6.8 mL/min flow rate, 48 °C reaction temperature, 1.3 wt% catalyst, 1:9 oil to methanol molar ratio and 83 s ultrasonic mixing time. The predictive and generalization abilities of RSM and artificial neural network (ANN) models were evaluated and compared. The study showed that ANN and RSM models could predict the yield with an R² value of 0.9955 and 0.9900 respectively. However, the ANN model predicted the yield with the least mean square error value of 0.00001294, which is much lower than RSM.     

B~0-B~0 Mixing in Local Gauged Baryon and Lepton Numbers

Using the effective Hamiltonian method, we analyze the B0-B0 mixing in the extension of the standard model （SM） where baryon number and lepton number are local gauge symmetries. The numerical results indicate the correction from the extra particles to the mass difference ArnB is significant. There is a 60% enhancement compared to the SM prediction for AraB at most, which agrees with the current experimental result.     

Natural Rubber/Graphene Oxide Nanocomposites Prepared by Latex Mixing

Natural rubber/graphene oxide (NR/GO) nanocomposites were prepared by latex mixing. The dispersion state of GO and the mechanical properties of the nanocomposites were studied. It was found that a uniform dispersion of GO in the NR matrix was achieved with the latex mixing method. The well-distributed GO was remarkably effective in improving the tensile strength and storage modulus of NR at very low filler contents, without sacrificing the ultimate strength. The percolation point of GO in the nanocomposites took place at a content of less than 0.1 parts by weight per hundred parts of rubber. The Halpin-Tsai model was used to analyze the reinforcement effect of GO for NR.     

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/Butadiene (Core) Styrene Acrylonitrile-G-Maleic Anhydride (Shell) Latex/Organoclay Ternary Nanocomposites

Ternary nanocomposites based on polyamide-6, maleated butadiene (core) -acrylonitrile-styrene (shell) rubber particles (PB-g-SAM), and modified montmorillonite (organoclay) were prepared by a twin-screw extruder. The glassy shell of the core-shell particles can act as a barrier which can resist the entrance of clay into the rubber phase. The influence of mixing sequence on the phase morphology and mechanical properties were studied. The microstructure of the ternary nanocomposites was characterized by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. It was found that the clay in the polyamide nanocomposites was partially exfoliated, exhibiting a mixture of exfoliated structures. The organoclay plates affected the interfacial adhesion between the polyamide-6 and the core-shell particles. The location of the organoclay plates in the blends with different mixing sequences produced differences of the mechanical properties. The results of mechanical testing revealed that the optimum mixing sequence to achieve balanced mechanical properties was mixing the polyamide-6 and organoclay first followed by mixing with the core-shell particles.     

原子系统中远失谐脉冲光束对的群速度操控

基于远失谐的四波混频过程, 在实验上得到了放大的探针光脉冲和产生的共轭光脉冲的同时慢光传输, 并通过改变抽运光和探针光之间的双光子失谐实现了群速度的同时操控. 首先在连续光模式下, 研究了入射探针光和新产生共轭光的增益与单光子失谐之间的变化关系. 随着单光子失谐在一定范围内加大, 探针光和共轭光的增益均表现出先增加后减小的变化趋势. 在具有增益特性的基础上, 分别采用6 μs和365 ns探针光脉冲, 研究了慢光的延迟时间和双光子失谐的关系. 对6 μs的探针光, 得到探针和共轭光脉冲的最大延迟分别为2.1 μs 和1.9 μs, 对应的群速度分别约为0.000119 c和0.000132 c, 相应延迟比分别为0.35和0.32. 对365 ns探针光, 探针和共轭光脉冲的最大延迟分别为756 ns和670 ns, 对应的群速度分别约为0.00033 c和0.00037 c, 相应延迟比提高到2.07和1.83.     

椭球颗粒搅拌运动及混合特性的数值模拟研究

为探讨在强制搅拌下同属性颗粒由分层到分布均匀状态的运动特征及规律, 本研究利用三维离散单元法模拟不同转速下U形罐体内等粒径椭球颗粒的混合过程. 从单颗粒随机运动轨迹、宏观颗粒流运动矢量图的角度分析颗粒混合过程的宏观混合规律及局部混合特征, 定量描述混合度与搅拌叶片旋转圈数的数学关系. 结果表明, 强制搅拌下同属性分层颗粒的混合是在对流混合及四个局部混合共同作用下实现的; 分层颗粒的混合度与搅拌轴的转速无关, 而与搅拌轴旋转圈数直接相关; 混合度与圈数的关系符合指数增长模型. 研究结果可为散体物料增混行业的设备改进及操作控制提供依据和参考.     

基于差分吸收光谱技术的大气痕量气体二维观测方法

基于差分吸收光谱技术, 对大气痕量气体二维观测方法进行研究. 对常规多轴差分吸收光谱系统进行改进, 使望远镜可指向不同方位角, 获取测量点各方位角上的痕量气体信息, 从而更直观地了解测量点四周污染气体分布及其演变情况. 主要对NO₂浓度分布进行了研究, 同时获取了不同方位角上的O₄斜柱浓度; 采用辐射传输模型模拟计算O₄斜柱浓度并与实测数据对比, 结果表明二者具有高度相关性, 验证了大气中O₄分布的稳定性; 基于实测O₄数据提取光路信息, 结合辐射传输模型对NO₂和O₄因廓线不同造成的散射路径差异进行修正, 将NO₂斜柱浓度进一步转化为体积混合比, 获得了不同方位角上NO₂ 浓度分布图. 将计算结果与长光程差分吸收光谱技术数据进行对比, 结果表明二者具有较好的一致性.     

The Effect of Chemical Equilibrium on the Formation of Stable Stratification

The formation of a stable stratification, rather than a uniformly mixed state, is shown to depend critically on the equation of state (EOS) or mixing rule for the density as a function of the solution constitution. For instance, ideal solutions can form any stable stratification at hydrostatic equilibrium, although molecular diffusion will eventually make the concentration of solute uniform. Several other types of EOS are considered at hydrostatic equilibrium, resulting in two and three layer stratifications. In the presence of convective mixing, however, the EOS serves only as a guide, since the dynamics of, for example, turbulent dispersion, significantly alter the formation of stratifications. The case of recirculating flows, however, can be simply treated and results in two layer stratifications for an EOS which is superjacent to the ideal solution. The example of stratification formation in a Burt separator is given.     

Proper Orthogonal Decomposition of the mixing layer flow into coherent structures and turbulent Gaussian fluctuations

The Proper Orthogonal Decomposition is used to decompose fluctuating turbulent flows into a coherent non-Gaussian component and background fluctuations. An application is performed from 2D experimental data of a turbulent plane mixing layer flow. The analyses of the energy spectra and the Probability Density Function of the velocity field show that POD extracts an incoherent part approaching the quasi-Gaussian distribution properties. The background fluctuations are homogeneous with small amplitude. New future applications are then conceivable like the modeling of the incoherent part for particular inflow condition generation methodology and the analysis of the cyclic velocity field variabilities in Internal Combustion engine flow. To cite this article: Ph. Druault et al., C. R. Mecanique 333 (2005).     

NUMERICAL STUDY ON THE STABILITY AND MIXING OF VERTICAL ROUNE BUOYANT JET IN SHALLOW WATER

The k-epsilon model was applied to establish the mathematical model of vertical round buoyant jet discharging into confined depth, and it was solved using the Hybrid Finite Analytic Method ( HFAM ). The numerical predictions demonstrate two generic flow patterns for different jet discharge and environmental parameters: ( i ) a stable buoyant flow discharge with the mixed fluid leaving the near-field warm in a surface warm water layer;( ii ) an unstable buoyant flow discharge with recirculation and re-entrainment of warm water in the near field. Furthermore, the mixing characters of vertical round buoyant jet were numerically predicted. Both the stability criterion and numerical predictions of bulk dilutions are in excellent agreement with Lee and Jirka ' s experiments and theory.