Geometric and Electronic Behavior of C60 on PTCDA Hydrogen Bonded Network

Self-assembled supramolecular networks are promising spacer layer for electronic decoupling from the metal substrate.However,the mechanism behind of how the intrinsic electronic structure of spacer layers affects the adsorbate is still unclear.Here a hydrogen bonded network composed of n-type semiconducting molecules 3,4,9,10-perylene-tetracarboxylic-dianhydride(PTCDA)is prepared under ultra-high vacuum to serve as a spacer layer for functional organics C60 on Au(111).The geometric and electronic information of C60 was investigated by scanning tunneling microscopy and scanning tunneling spectroscopy(STM/STS)at 5 K.Effective decoupling from the metal surface yields an energy gap of 3.67 eV for C602nd,merely considering the HOMO-LUMO peak separation.The broadening of resonance peaks in STS measurements however indicates unneglected interlayer interactions in this hetero-organic system.Moreover,we scrutinize the nucleation sites of C60 on PTCDA layer and attribute this to the decreased diffusion capability on a less dense molecular arrangement possessing inhomogeneous spatial distribution of unoccupied molecular orbitals.     

抗污染薄层复合聚酰胺膜的结构设计及改性策略

由活性层和支撑层组成的薄层复合(TFC)聚酰胺(PA)膜,是目前广泛应用于纳滤、反渗透、正渗透和压力延迟渗透过程中的高性能脱盐膜,具有水通量大和截盐率高等优异性能。然而,由于TFC-PA膜存在活性层疏水性强、支撑层孔径大等特点,致使TFC-PA膜在实际使用过程中极易受到膜污染,制约了TFC-PA膜的进一步推广和使用。本文讨论分析了TFC-PA膜的结构特点和表面性质,总结归纳了在不同膜过程中TFC-PA膜污染形成的原因及特点,详细论述了国内外抗污染TFC-PA膜的研究进展。本文重点介绍了活性层抗污染改性和支撑层抗污染改性方法,并对其抗污染机理以及存在的问题进行了阐述与分析,最后对抗污染TFC-PA膜的结构设计与表面改性策略进行了总结及展望。     

基于2-羟丙基-β-环糊精修饰的CdTe荧光探针定量分析结晶紫及机理探讨

在稳定剂巯基乙酸(TGA)和修饰剂2-羟丙基-β-环糊精(2-Hp-β-CD)存在下,获得的2-Hp-β-CDCdTe量子点具有高的荧光强度、水溶性和光稳定性,以及对结晶紫(CV)的良好包含能力。利用紫外-可见吸收光谱、荧光光谱及TEM图谱,研究了2-Hp-β-CDCdTe量子点与CV的相互作用情况。通过十六烷基三甲基溴化铵(CTAB)作用,显著降低了供体与受体之间的距离,促使量子点与结晶紫发生能量转移,且量子点的荧光光谱与CV的吸收光谱有效重叠,据此建立了量子点与CV的荧光共振能量转移(FRET)体系,并用于CV含量的测定。结果表明,在pH 8.0的Tris-HCl缓冲液中,当存在CTAB时,CV能对2-Hp-β-CDCdTe量子点的荧光峰发生猝灭,且CV浓度在1.0×10~(-7)～1.0×10~(-5) mol/L范围内与量子点的荧光强度变化(ΔF)呈良好线性关系(r~2=0.995 2),检出限为1.74×10~(-8) mol/L,平均回收率为99.0%～106%。     

CO2-水-页岩相互作用的研究现状及展望

简要综述了CO2、水和页岩间矿物的相互作用,分析了CO2注入到地下进入页岩层后,地下含水层pH值的变化,并根据页岩层的矿物学组成分为黏土矿物和脆性矿物,较为详细地描述了CO2与黏土矿物和脆性矿物之间发生的地球化学反应,概述了此反应对页岩层孔隙度和渗透率的影响。同时,也讨论了CO2增强页岩气开采的现实问题及发展趋势,为今后的研究提供了参考。     

Photocatalysis: an overview of recent developments and technological advancements

Photocatalysis,which is the catalyzation of redox reactions via the use of energy obtained from light sources,is a topic that has garnered a lot of attention in recent years as a means of addressing the environmental and economic issues plaguing society today.Of particular interest are photosynthesis can potentially mimic a variety of vital reactions,many of which hold the key to develop sustainable energy economy.In light of this,many of the technological and procedural advancements that have recently occurred in the field are discussed in this review,namely those linked to:(1)photocatalysts made from metal oxides,nitride,and sulfides;(2)photocatalysis via polymeric carbon nitride(PCN);and(3)general advances and mechanistic insights related to TiO2-based catalysts.The challenges and opportunities that have arisen over the past few years are discussed in detail.Basic concepts and experimental procedures which could be useful for eventually overcoming the problems associated with photocatalysis are presented herein.     

Predictable site-selective radical fluorination of tertiary ethers

In this communication,we disclose the first example of metal-free and site-selective radical fluorination of readily available tertiary alkyl ethers,enabled by synergistic photocatalysis and organocatalysis.This catalytic combination allows for exclusive fluorination of tertiary C–O bonds under mild conditions even in the presence of competing reaction sites.The excellent functional group tolerance affords valuable access to sterically hindered alkyl fluorides through late-stage modification of complex molecules.The successful use of tertiary alkyl ethers in radical fluorination enhances the structural diversity of aliphatic fluorides that can be derived from naturally abundant alcohols.     

Transformations of N-arylpropiolamides to indoline-2,3-diones and acids via C≡C triple bond oxidative cleavage and C(sp^2)–H functionalization

A new palladium-catalyzed oxidative conversion of N-arylpropiolamides and H2O to various indoline-2,3-diones and acids through the C≡C triple bond cleavage and C(sp2)–H functionalization is described,which is promoted by a cooperative action of catalytic CuBr2,2,2,6,6-tetramethyl-1-piperidinyloxy(TEMPO)and O2.The method provides a practical tool for transformations of alkynes by means of a C–H functionalization strategy,which enables the formation of one C–C bond and multiple C–O bonds in a single reaction with high substrates compatibility and excellent functional group tolerance.     

MoS2 nanorods with inner caves through synchronous encapsulation of sulfur for high performance Li–S cathodes

Lithium–sulfur(Li–S)batteries have become one of the most promising candidates for next-generation batteries owing to their high specific capacity,low cost,and environment-friendliness.Many efforts have been made to mitigate the"shuttle effect"through physical adsorption and chemical bonding.MoS2 has been proposed as a cathode material to provide effective anchoring sites for lithium polysulfides(Li PSs),but is still limited by its layer structure.Herein,we designed novel MoS2 nanorods with inner caves based on our previous work,and performed synchronous encapsulation of sulfur during the synthesis process.The outer MoS2 tubular shells physically inhibit the outward diffusion of polysulfide species while the inner particles chemically anchor the polysulfides to prevent shuttling.As the cathode matrix in Li–S batteries,the electrochemical results deliver a high initial discharge capacity of 1213 mAhg^-1 for sulfur at 0.1 C.After cycling at 1 C for 300 cycles,the cells exhibit a capacity decay of only 0.076%per cycle and high average coulombic efficiency over 95%.The tubular MoS2 structure is an innovative and appealing design,which could be regarded as a prospective substrate for the improved performance of Li–S batteries.     

绽放的奥秘

植物的花头开始时一般是闭合的结构.随着生长过程的继续,其上应力分布变得严重地不均匀,并在其后的形貌演化过程（包括开裂和种子的散播）中,起着关键的作用.图中所示为利用Ag和SiO2此一无机材料体系获得的花头-花茎结构.Ag     

用混合劈尖测量水膜折射率

所谓"混合劈尖"是区别于单纯的空气劈尖和水膜劈尖的一种新型劈尖,即在劈尖角θ及有效长度L保持不变的情况下,在空气劈尖内人为地制造出水膜特区,形成一劈两区的布局.实验中同一光束的平行单色光垂直照射在该劈尖上,在两区域内不