Optomechanical force gradient sensing with levitated nanosphere pair

Guided by recent progress in ground state cooling and ultraweak force sensing in the optomechanical systems with optically levitated particles,we propose a novel quantum sensing protocol that can detect the gradient of a force field directly with extremely high sensitivity.The system consists of a pair of nanospheres levitated in the high vacuum environment with optical tweezers and an optical resonator.By positioning the two spheres suitably relative to the cavity,only the collective breathing mode of the sphere pair couples to the cavity field.This optomechanical coupling will transfer the information of force difference acting on the two sensors to cavity photons,which can then be detected directly at the output of the cavity.Given the optimal control of various technical noise sources,the sensitivity could reach 10^-15N m^-1/√HZ with a high spatial resolution of micron scale on a state-of-the-art experimental setup.The potential application of this protocol in searching for short range“new force”is analyzed.Compared with conventional searching protocols with a single levitated sphere,the method proposed here can increase the signal-to-noise ratio by more than one magnitude in a large searching parameter space.     

Enhanced thermoelectric performance of PEDOT:PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

General Decay for a Thermoelastic Problem of a Microbeam with Gurtin-Pipkin Thermal Law

In this paper, we study the well-posedness and the asymptotic stability of a one-dimensional thermoelastic microbeam system, where the heat conduction is given by Gurtin-Pipkin thermal law. We first establish the well-posedness of the system by using the semigroup arguments and Lumer-Phillips theorem. We then obtain an explicit and general formula for the energy decay rates through perturbed energy method and some properties of the convex functions.     

从学生的“问题”出发审视空间向量内容的教学和育人价值北大核心

1问题提出高中数学课程引入空间向量内容后,使很多原本需要进行推理演化的立体几何问题的求解“代数化”、“程序化”了,以往的一些立体几何的“难题”变得“简单”了.有老师认为,立体几何内容在培养学生直观想象、逻辑推理核心素养的育人价值减弱了.在教学中,不难发现即便有空间向量作为解决立体几何问题的有力工具,学生在解决立体几何问题时依然会存在各式各样的“错误”.     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

带滩槽地形的连续弯道中纵向流速横向分布解析

本文基于沿水深积分的动量方程,假定二次流项和弯道附加应力项沿横断面呈线性分布,提出了预测弯道垂线平均纵向流速的解析计算方法,进一步提出了河槽区和河滩区垂线平均纵向流速沿断面分布的求解模式,并将其应用于带滩槽地形的反向连续弯道水槽中. 根据实测数据率定计算参数,该模式可计算不同出口水深条件下断面垂线平均纵向流速分布,计算结果与实测数据吻合良好.分析了线性分布假设中参数随水深变化的取值规律和沿横断面分布特点,并对参数进行了敏感性分析,分析表明线性假设中一次项系数分区位置对流速峰值的大小和位置影响较大,常数项根据地形横比降变化进行分区取值,流速计算值对常数项在水平段和斜坡段分区位置较为敏感,并根据参数的敏感度提出了参数沿水槽的均值作为参考值.讨论了动量方程中二次流项和弯道附加应力项沿弯道的横向分布规律,进一步认识线性假设的适用范围,结果表明线性假设在本文试验水槽中适用于弯道沿程.研究成果有助于认识带滩槽地形的连续弯道纵向流速分布特征及其形成机制.      

Examples of compactλ-hypersurfaces in Euclidean spaces

In this paper,we first construct compact embeddedλ-hypersurfaces with the topology of torus which are calledλ-torus in Euclidean spaces?n^+1.Then,we give many compact immersedλ-hypersurfaces in Euclidean spaces?n^+1.     

甘肃陇南锑矿泄露区土壤重金属污染及风险评价

陇南（甘肃）地区锑矿发生尾矿泄露,导致矿区采矿废物蔓延到周边农田土壤,事故发生后,对部分地区进行了紧急土壤清理。在清理过后的土壤（20-40 cm）取样,进行土壤重金属浓度测定,并通过地质累积指数(Igeo),富集因子（EF）,潜在风险评价（RI）,主成分分析（PCA）和相关性等技术对重金属的污染程度和来源识别进行了评价和分析。结果表明:Sb、Hg、Al、Cu、Ga、Ge和Zn的平均浓度高于甘肃省的背景含量,尤其Sb和Hg是主要污染物。从潜在风险评价指数计算的所有综合污染指数表明土壤受到重金属污染严重（RI>600）。主成分分析和相关性表明,Sb, Hg, Pb和Zn主要来源于人为的矿区活动,Ga和Ge是受自然源和人为活动共同影响,Cu、Al和Ni主要是自然来源。     

基于TOPSIS模型的机场网络节点重要度评估

在机场网络中单个机场节点的失效往往会对其他的节点产生影响,特别是关键节点的失效会波及整个网络.准确客观的识别重要节点机场关乎整个机场网络的安全运营.本文分析了机场网络拓扑特性中的度、集聚系数和接近度指标,考虑了机场旅客吞吐量和所在城市人口等交通经济特性指标,使用熵权法确定权重的基础上,应用TOPSIS法构建综合评价体系模型,最后以华东地区机场网络为例进行节点重要度排序.结果表明与单一指标的评估结果相比,该方法更加全面客观的确定不同属性指标的权重,避免了不同指标取值的差异性,使评价更加全面,更符合机场网络实际运营情况.