硅氧烷改性环氧-苯丙树脂水分散体的合成及性能研究

硅氧烷改性环氧-苯丙树脂水分散体的合成及性能研究;硅氧烷;改性;环氧-苯丙树脂;水分散体;性能     

Ramsey重数研究

对于图G_1,G_2,2色广义Ramsey数R(G_1,G_2)表示满足下列条件的最小正整数p:如果用2种颜色中的一种对K_p的每一条边染色,总有K_p的一个子图同构于G_i,它的边都染有第i种颜色,1≤i≤2.对K_(R(G))的所有可能的边2-着色中,含有单色子图G的最少的个数称为图G的重数.利用计算机计算了若干不小于5阶图的Ramsey重数精确值:M(C_6)=10,M(P_6)=300,M(P_7)=720;当计算量很大时,利用模拟退火算法得到了若干Ramsey重数的上界:M(B_4)≤51,M(K_(2,4))≤24,M(K_(3,3))≤150,M(K_(2,5))≤47,M(W_6)≤34,M(B_5)≤48.     

石墨烯包裹纳米线体系的等价参数以及法诺共振的计算与讨论

文章基于Mie全波散射理论,建立了石墨烯包裹介电纳米线平行排布在介质中的复合结构的有效介质理论.在长波极限下,我们得到了石墨烯包裹介电(GCD)纳米线结构的等价(EQ)介电常数和磁导率.通过分析比较远场散射谱,我们发现相同尺寸的等价电磁结构可以和原复合结构进行有效的拟合;此外,由于介电颗粒及石墨烯参数的可调性,我们得到了该复合体系可调的隐身及共振散射.进一步研究发现,该复合体系还可以实现可调的法诺共振.     

连续斜电阻丝测量飞板速度时弯曲波影响的理论分析

本文对连续斜电阻丝测飞板速度时弯曲波的影响作了理论分析。当切割速度c小于弯曲波的最大波速Cp max时,就有可能使电阻丝脱离飞板的接触点。对于这种影响,作了计算,并进行了相应的实验,二者的结果是符合得很好。     

压力驱动微通道流中尺度与扩散关系的研究

对压力驱动微通道流中的扩散进行了数值模拟,说明微尺度效应使流体扩散的不均匀性趋于明显;分析了在各种W/D情况下,距离管道壁面各个层面上的扩散尺度变化,说明了微管道中的对流和壁面效应对于扩散尺度的影响。本文结论对于对微通道的优化设计有参考价值。     

RESEARCH ON DIFFUSION IN MICRO-CHANNEL FLOW DRIVEN BY ELECTROOSMOSIS

Numerical simulation using the finite differential method was carried out to analyze the diffusion of an impulse sample in the micro-channel driven by electroosmosis. The results show that the electrical field strength applied externally and the concentration of buffer solution play a significant role in the diffusion of sample, however, hydraulic diameter and aspect ratio of height to width of channel play a small role in it. Weakening the electrical field strength applied externally and the concentration of buffer solution properly can prevent the sample band from broadening effectively, and promote the efficiency of testing and separation as well as keep a faster speed of transport. The conclusions are helpful to the optimal design for micro-channel.     

基于编码器的复摆设计与实验研究

针对复摆实验,设计了一种基于编码器的复摆实验装置。该装置将摆锤和多孔摆结合起来,可以采用多种方式对重力加速度、转动惯量进行求解,并验证了刚体的平行轴定理。在实验过程中,采用Matlab进行最小二乘法线性拟合,创新性地完成了对重力加速度的求解和平行轴定理的验证。实验结果表明,相比于传统的复摆,该装置更为简便,精度更高。     

纤芯错位对高功率光纤激光性能的影响

理论分析了纤芯错位对激光输出功率及光束质量的影响,研究表明,纤芯错位后纤芯中的各个模式均有一定的功率衰耗,且基模总会向高阶模耦合,导致光束质量下降。采用20/400μm的双包层掺镱光纤,搭建了高功率全光纤激光振荡系统,实验研究了谐振腔外纤芯错位、谐振腔内纤芯错位以及谐振腔内和谐振腔外纤芯同时错位几种不同的情况对输出激光性能的影响,结果表明,谐振腔内纤芯错位和谐振腔外纤芯错位都会造成激光器性能的下降,但谐振腔内纤芯错位将导致激光器功率明显下降,而谐振腔内和谐振腔外同时错位会导致激光器光束质量急剧下降。     

A two-dimensional fully analytical model with polarization effect for off-state channel potential and electric field distributions of GaN-based field-plated high electron mobility transistor

In this paper, we present a two-dimensional （2D） fully analytical model with consideration of polarization effect for the channel potential and electric field distributions of the gate field-plated high electron mobility transistor （FP-HEMT） on the basis of 2D Poisson＇s solution. The dependences of the channel potential and electric field distributions on drain bias, polarization charge density, FP structure parameters, A1GaN/GaN material parameters, etc. are investigated. A simple and convenient approach to designing high breakdown voltage FP-HEMTs is also proposed. The validity of this model is demonstrated by comparison with the numerical simulations with Silvaco-Atlas. The method in this paper can be extended to the development of other analytical models for different device structures, such as MIS-HEMTs, multiple-FP HETMs, slant-FP HEMTs, etc.     

Phase transition model of water flow irradiated by high-energy laser in a chamber

In the absorption chamber of a high-energy laser energy meter, water is directly used as an absorbing medium and the interaction of the high-power laser and the water flow can produce a variety of physical phenomena such as phase transitions. The unit difference method is adopted to deduce the phase transition model for water flow irradiated by a high-energy laser. In addition, the model is simulated and verified through experiments. Among them, the experimental verification uses the photographic method, shooting the distribution and the form of the air mass of water flow in different operating conditions, which are compared with the simulation results. The research shows that it is achievable to reduce the intensity of the phase transition by increasing the water flow, reducing the power intensity of the beam, shortening the distance the beam covers, reducing the initial water temperature or adopting a shorter wavelength laser. The study＇s results will provide the reference for the design of a water-direct-absorption-type high-energy laser energy meter as well as an analysis of the interaction processes of other similar high-power lasers and water flow.