手性恶唑硼烷结构与还原苯基乙基甲酮的对映选择性研究

本文以苯基乙基甲酮为还原底物, 研究了原地(in situ)制备的在3、4、5位具有不同取代基的手性1,3,2-恶唑硼烷催化剂的结构与不对称催化效应关系。研究结果表明, 在不对称催化硼烷还原反应中(CBS方法)、产物的构型和对映选择性主要受手性恶唑硼烷的4位取代基控制。     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

超声波辅助Ru-B非晶态合金常压催化肉桂醛加氢制备肉桂醇

采用KBH₄化学还原法制备了超细Ru-B非晶态合金催化剂。Ru-B催化剂在肉桂醇液相常压加氢中显示出较高的肉桂醇选择性。在加氢过程中使用超声辐射能大大提高反应速率而肉桂醇的选择性几乎保持不变。加氢速率随着超声频率或超声时间的增加而增加。通过XRD、XPS、TEM、BET和ICP等各种表征手段，简要研究了超声辐射对Ru-B催化剂结构和电子特征的影响。同时，还讨论了超声对肉桂醛选择性加氢制肉桂醇催化性能的促进作用。     

催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．     

MODIFICATION OF TRANSITION METAL CATIONS TO POLYMER-STABILIZED PLATINUM COLLOIDAL CLUSTERS IN ENANTIOSELECTIVE HYDROGENATION OF METHYL PYRUVATE

Modification of transition metal cations to polymer-stabilized Pt colloidal clusters modified with cinchonidine was studied in enantioselective hydrogenation of methyl pyruvate. Compared to the enantiomeric excess (e.e.) value (71.4%) obtained without the presence of metal cations, obvious e.e. enhancement (up to 82.5%) was resulted from the addition of Zn^2 but with a certain decrease in activity. The reaction parameters in the presence of Zn^2 were also studied. It was found that the Pt colloidal catalysts in the presence of metal cations performed very differently from that in the absence of metal cations.     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

制备参数对β-Mo2N0.78催化剂加氢脱硫活性影响的研究

以N2与H2的混合气为反应气，和三氧化钼进行多段程序升温反应，制得一种β晶型的氮化钼。以噻吩为模型化合物的常压加氢脱硫反应表明，β-Mo2N0.78具有较强的加氢脱硫活性和强的抗硫化性能。同时考察了预还原、反应温度以及氮化末温、升温速率、反应气中N2-H2比及氮化时间等制备参数对β-Mo2N0.78加氢脱硫活性的影响。研究发现，β-Mo2N0.78的加氢脱硫活性在320 ℃～400 ℃随反应温度的升高增强，而还原预处理会降低催化剂的活性。氮化末温、氮化时间、反应气组成和升温速率等制备参数对催化剂的活性有明显的影响：随着氮化末温的升高，所制备的催化剂催化加氢脱硫活性降低；在氮化末温恒温较长时间，可以引起制备催化剂的加氢脱硫活性下降；存在最佳的反应气组成和各段升温速率。小晶粒的β-Mo2N0.78具有强的加氢脱硫活性。     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

多壁碳纳米管负载铂的甲苯加氢脱芳催化剂

以多壁碳纳米管(CNTs)为载体制备了负载型Pt催化剂Pt/CNTs并将其用于催化甲苯加氢脱芳(HDA)反应.结果表明,在1.0%Pt/CNTs催化剂上,在0.4MPa,373K,PhCH3/H2摩尔比=6/94和GHSV=120L/(h.g)的反应条件下,甲苯转化率可达100%,比反应速率为0.0523mmol/(s.m2),分别是γ-Al2O3和AC负载各自最佳Pt负载量催化剂1.4%Pt/γ-Al2O3和2.4%Pt/AC上相应值的1.17和1.18倍.甲苯加氢产物全部为甲基环己烷,其他可能的加氢产物均在气相色谱检测限以下.催化剂的表征研究揭示,用CNTs代替γ-Al2O3或AC作为载体并不会引起所负载Pt催化剂上甲苯HDA反应的表观活化能发生明显变化.与γ-Al2O3或AC负载的相应催化剂相比,一方面,CNTs负载的Pt催化剂易于在较低温度下还原活化,并且其工作态催化剂表面催化活性Pt物种(Pt0)所占表面Pt摩尔分率有所提高;另一方面,CNTs负载的Pt催化剂对H2具有较高的吸附/活化和储存能力.这些促进效应对催化剂HDA活性的提高都有重要贡献.     

Highly Stereoselective Synthesis of trans-3-Aryl-4-carbethoxy-2,3-dihydro-2-fur-2＇-oyl-5-methylfurans

Multi-substituted dihydrofurans are valuable intermediates for the synthesis of natural products and pharmaceuticals. Considerable attention has been focused on the development of efficient and regioselective methods for their preparation. Using K2CO3 as a base, with the reaction of fur-2-oylmethyltriphenylarsonium bromide 1 and ethyl 2-acetyl-3-arylacrylate 2 in tetrahydrofuran at room temperature, we found an efficient protocol was achieved to synthesize trans-3-aryl-4-carbethoxy-2,3-dihydro-2-fur-2＇-oyl-5-methylfurans 3 in good yield with high stereoselectivity. The structure of compound 3 was confirmed by IR, ^1H NMR, MS and HRMS. The mechanism for the formation of 3 was proposed.