乙腈液相选择性加氢中Ni-B非晶态合金和Raney Ni催化性能的比较

以乙腈液相选择性加氢为目标反应，分别考察了超细Ni-B非晶态合金和Rancy Ni的催化性能，发现两者的质量比活性相似，但单位活性比表面积上前者的活性及对乙胺的选择性显著高于后者，乙胺的最高得率前者为67．6％后者为40％。通过催化剂的系统表征，结合考察乙腈加氢反应的动力学，从几何效应和电子效应两方面阐述了Ni-B非晶态合金催化性能与催化剂结构和表面电子态的关系。     

磷化钼催化剂催化乙腈选择加氢

制备了一系列不同投料比例(Mo/P摩尔比为0.6~2.6)的磷化钼催化剂,研究了催化剂对乙腈选择加氢反应的催化性能.结果表明,在初始Mo/P>1.0时,催化剂表现出很高的乙胺选择性,达到80%~90%;Mo/P<1.0时,对二乙胺和三乙胺有很好的选择性,二者之和达到90%左右;而在Mo/P=1.0时,催化剂具有最高的乙腈转化率.     

超细Co—B非晶态合金的制备及其催化乙腈加氢性能

报道了一种用于乙腈加氢的新型复合型催化剂－超细Ｃｏ－Ｂ非昌态合金,其催化性能显著优于其它Ｃｏ基催化剂,以此代替工业用Ｒａｎｅｙ Ｎｉ,不仅可提高对乙胺的选择性,而且可显著减轻环境污染。通过一系列表征。讨论了乙腈在催化剂活性位的吸附模式及催化加氢反应机理,由此对其催化性能与催化剂结构的关系进行了说明。     

Ni-Ce-P非晶态合金催化剂用于氯代硝基苯液相加氢制氯代苯胺

 采用化学还原法制备了Ni-Ce-P非晶态合金催化剂,用X射线能谱、 X射线衍射、 选区电子衍射、 透射电子显微镜和差热分析等方法对催化剂的组成、结构、形貌及热稳定性进行了表征,讨论了Ni-Ce-P非晶态合金催化剂的催化性能和结构的关系,并以氯代硝基苯液相加氢合成氯代苯胺为探针反应考察了所制备催化剂的加氢性能. 研究结果表明,在不加脱卤抑制剂的情况下,在110 ℃下反应时所选4种反应物的转化率均可达99.8%, 脱卤率小于1.8%, 且Ni-Ce-P非晶态合金的活性为Ni-P非晶态合金催化剂的2倍,表现出较高的加氢性能和抑制脱卤性能.     

高分散 Ru/MMT 催化剂的制备及其催化喹啉加氢性能

 通过简单的离子交换法制备出高分散的蒙脱土 (MMT) 负载 Ru 催化剂, 采用 X 射线衍射、X 射线光电子能谱、程序升温还原和高分辨透射电子显微镜等手段对催化剂进行了表征. 结果表明, 金属 Ru 在蒙脱土层间高度分散, Ru 的平均粒径约 2 nm. 在喹啉加氢反应中, 该催化剂显示出很高的反应活性和选择性. 在 2 MPa 和 60 °C 的温和条件下, 以水为溶剂时, Ru/MMT 催化喹啉加氢生成 1,2,3,4-四氢喹啉的选择性高于 96.4%, 喹啉转化率达 99.2%. 当温度升高到 140 °C、压力增加到 3 MPa 时, 不需要补加催化剂就可以将喹啉一步加氢生成十氢喹啉, 选择性高达 98.1%.     

超声辅助化学还原法制备高活性Co-B非晶态合金催化剂

采用超声辅助KBH4化学还原Co(OH)2胶体法制备了粒径均匀的Co-B非晶态合金.在乙腈液相选择性加氢制取乙胺反应中,与传统化学还原法制备的Co-B非晶态合金催化剂相比,该催化剂具有很高的催化活性.这归因于其Co活性位的高度分散、Co活性位对氢的强吸附,以及Co-B非晶态合金间强电子相互作用.     

新型高性能Cu/HMS催化剂的合成及其在草酸二甲酯催化加氢合成 乙二醇反应中的应用

采用原位合成法合成了介孔Cu/HMS催化剂, 并以草酸二甲酯催化加氢合成乙二醇为探针反应考察了不同焙烧温度对反应催化性能的影响, 结果表明焙烧温度为650 ℃时合成的催化剂在该反应中表现出最佳的催化性能. 在反应温度为200 ℃、压力为3 MPa、氢酯比为50、液时空速为0.74 h－1的条件下, 草酸二甲酯的转化率达到100%, 并且乙二醇的选择性达到97%. 采用X射线粉末衍射、N2低温吸附、H2-TPR、N2O滴定、X射线光电子能谱及傅利叶变换红外光谱对系列催化剂进行了系统表征, 阐述了焙烧温度对催化性能影响的本质原因. 研究表明焙烧温度能够影响活性铜物种的分散度和铜物种与载体间的相互作用, 从而影响草酸二甲酯催化加氢的催化性能.     

聚乙二醇稳定的RuB非晶态纳米催化剂对吡啶及其衍生物加氢反应

制备了聚乙二醇(PEG)稳定的RuB非晶态纳米催化剂, 采用X射线衍射(XRD)、X射线光电子能谱(XPS)和透射电镜(TEM)对催化剂进行表征. 结果表明, RuB以高分散态存在, 其平均粒径为2.4 nm. 该催化剂体系对吡啶及其衍生物显示了优异的催化活性和选择性. 在100 ℃、氢气压力3.0 MPa, 催化剂与底物的摩尔比为1/670的条件下, 反应60 min, 催化吡啶加氢的转化率大于99.0%, 生成哌啶的选择性为100%. 对含不同取代基的底物的加氢反应活性顺序如下: 2-甲基吡啶>2,6-二甲基吡啶>吡啶.     

Ni-B非晶态合金催化剂用于卤代硝基苯液相加氢制卤代苯胺

 用化学还原法制备了Ni-B非晶态合金催化剂,并将其用于4种卤代硝基苯的液相加氢反应. 采用X射线衍射和透射电子显微镜研究了催化剂的非晶性质. 在373 K下处理2 h后催化剂保持非晶态结构,在773 K下处理2 h后催化剂完全晶化. 讨论了Ni-B非晶态合金催化剂的催化性能与其结构之间的关系,并与其它Ni基催化剂进行了比较. Ni-B非晶态合金催化剂不仅具有较高的催化活性,而且对卤代芳胺的选择性较高,脱卤率小于4%,优于其它Ni基催化剂.     

La修饰的Co-B非晶态催化剂用于乳酸乙酯选择性加氢制1,2-丙二醇

用化学还原法制备了La修饰的Co-B非晶态合金催化剂(Co-La-B),并考察了其在乳酸乙酯液相加氢制1,2-丙二醇(1,2-PDO)反应中的催化性能.通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、比表面积测定(BET)、差示扫描量热(DSC)、电感耦合等离子发射光谱(ICP-OES)、X射线光电子能谱(XPS)、氢气化学吸附、氢气程序升温脱附(H2-TPD)等手段对催化剂进行表征,研究了稀土助剂La对Co-B催化剂催化性能的影响.结果表明,活性组分Co以元素态和氧化态两种形式存在于Co-La-B非晶态合金催化剂中,催化剂中存在B向Co的电子转移,富电子的Co用于活化氢,氧化态形式存在的La3+促进了B向Co的电子转移;适量的La能提高催化剂的热稳定性,显著减小催化剂粒径,使催化剂形成更加单一的Co吸附活性位,有利于吸附活化的氢促进加氢反应进行.在氢气压力6 MPa,反应温度433 K,反应时间9 h的条件下,0.5%Co-La-B催化剂表现出最优的催化加氢性能,乳酸乙酯的转化率达到99.7%,1,2-丙二醇的选择性达到98.5%.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.