糖厂澄清工段生产指标建模及操作参数优化

针对亚法糖厂澄清工段清汁色值和清汁残硫量难以在线测量的问题,提出了一种基于人工蜂群优化的在线极限学习机软测量方法。先用核主元分析法确定影响清汁质量的关键参数,建立基于在线极限学习机的软测量模型。同时利用人工蜂群算法对在线极限学习机的隐层参数进行寻优,优化所建模型。最后,使用带约束的粒子群对软测量模型进行优化求解,得到典型工况下的最优操作设定值,为后续工况操作提供参考依据。仿真结果表明,基于人工蜂群优化的在线极限学习机模型能够准确地预测清汁色值和残硫量,同时基于此模型优化的操作参数设定值能够达到期望的指标。     

High throughput N-modular redundancy for error correction design of memristive stateful logic

Memristive stateful logic is one of the most promising candidates to implement an in-memory computing system that computes within the storage unit. It can eliminate the costs for the data movement in the traditional von Neumann system. However, the instability in the memristors is inevitable due to the limitation of the current fabrication technology, which incurs a great challenge for the reliability of the memristive stateful logic. In this paper, the implication of device instability on the reliability of the logic event is simulated. The mathematical relationship between logic reliability and redundancy has been deduced. By combining the mathematical relationship with the vector-matrix multiplication in a memristive crossbar array, the logic error correction scheme with high throughput has been proposed. Moreover, a universal design paradigm has been put forward for complex logic. And the circuit schematic and the flow of the scheme have been raised. Finally, a 1-bit full adder (FA) based on the NOR logic and NOT logic is simulated and the mathematical evaluation is performed. It demonstrates the scheme can improve the reliability of the logic significantly. And compared with other four error corrections, the scheme which can be suitable for all kinds of R-R logics and V-R logics has the best universality and throughput. Compared with the other two approaches which also need additional complementary metal-oxide semiconductor (CMOS) circuits, it needs fewer transistors and cycles for the error correction.     

基于混合蛙跳算法的时序电路测试生成

阐述了将混合蛙跳算法应用在时序电路自动测试生成的实现方法和结果;根据时序电路自身的结构特点,构造了测试生成的混合蛙跳表达方式,设计了自动测试生成离散混合蛙跳模型,通过群体中青蛙间的合作和竞争产生的群智能指导快速优化收敛;最后,根据国际标准时序电路进行了验证试验;结果表明,与同类算法相比,该算法获得了较小的测试集和较高的故障覆盖率。     

全二维气相色谱-飞行时间质谱分析赖百当油的挥发性成分

建立了赖百当油的全二维气相色谱-飞行时间质谱(GC×GC/TOF-MS)指纹图谱,通过质谱库检索、保留指数比对、标准品同时进样验证与文献比较,共鉴定了108个组分,占挥发油总量的94.81%,主要成分为:苯丙酸乙酯(30.92%)、绿花白干层醇(9.85%)、苯丙酸(7.91%)、乙酸龙脑酯(2.87%)、乙酸(2.81%)、杜香醇(2.41%)、喇叭烯(2.14%)等。本实验首次用GC×GC/TOF-MS对赖百当油进行了分析,并初步进行了致香机理的阐释,为该植物的开发、调香应用和品控提供了技术支撑。     

基于四波混频的光纤非线性系数测量方法

为解决四波混频法测量光纤非线性系数未考虑泵浦消耗而导致结果不准确的问题,提出了一种在简并四波混频情况下测量非线性系数的方法.根据光纤中简并的四波混频理论,推导出了考虑泵浦消耗和光纤损耗的椭圆方程.通过设定数值计算所需的各个参量并利用简单的数学方法分析了计入泵浦消耗、光纤损耗的必要性,得到被测光纤的非线性系数,与Optisystem的仿真结果一致.研究表明,这种改进的测量方法不但适用于小信号情形下的四波混频过程,还可以应用于出现参量饱和现象的场合,为进一步设计光纤2R再生器件提供了重要依据.     

基于四波混频的光纤非线性系数测量方法

为解决四波混频法测量光纤非线性系数未考虑泵浦消耗而导致结果不准确的问题,提出了一种在简并四波混频情况下测量非线性系数的方法.根据光纤中简并的四波混频理论,推导出了考虑泵浦消耗和光纤损耗的椭圆方程.通过设定数值计算所需的各个参量并利用简单的数学方法分析了计入泵浦消耗、光纤损耗的必要性,得到被测光纤的非线性系数,与Optisystem的仿真结果一致.研究表明,这种改进的测量方法不但适用于小信号情形下的四波混频过程,还可以应用于出现参量饱和现象的场合,为进一步设计光纤2R再生器件提供了重要依据.     

残差自回归半参数模型的参数估计

研究了残差自回归半参数模型的参数估计,运用广义最小二乘法估计了参数部分．用随机模拟说明了运用广义最小二乘（GLSE）估计出的参数部分优于运用普通最小二乘法（OKSE）得到的估计．     

基于双开口金属环的太赫兹超材料吸波体传感器

本文提出了一种用于生物样品检测的高灵敏度太赫兹折射率超材料吸波体传感器.该传感器由2个同心开口金属环组成,是一种多模谐振器.传感器在0.7—2.5 THz频率范围内具有2个独立可调的工作频段,即1.079 THz和2.271 THz,可观测样品在太赫兹波段的不同电磁效应.采用吸收特性、灵敏度等指标评估太赫兹传感器的性能,自由空间中的吸收率超过99.9%,具有较高的频率选择特性,灵敏度达到693.7 GHz/RIU,检测生物样品最小折射率变化量为0.004,传感性能较好.所提出的传感器使用低介电常数的柔性材料,具有生物相容性、便携性等优点,且在0°—60°斜入射角下及4%的制作误差内显示出高度稳定性.此外,通过乙醇-水混合物模拟实验,验证了传感器的检测效果.本文设计的传感器单元结构之间相互作用小、稳定、易制作,能够显著增强光与物质之间相互作用,在太赫兹高灵敏生物传感检测中具有广阔的应用前景.     

Brightening single-photon emitters by combining an ultrathin metallic antenna and a silicon quasi-BIC antenna

Bright single-photon emitters(SPEs)are fundamental components in many quantum applications.However,it is difficult to simultaneously get large Purcell enhancements and quantum yields in metallic nanostructures because of the huge losses in the metallic nanostructures.Herein,we propose to combine an ultrathin metallic bowtie antenna with a silicon antenna above a metallic substrate to simultaneously get large Purcell enhancements,quantum yields,and collection efficiencies.As a result,the brightness of SPEs in the hybrid nanostructure is greatly increased.Due to the deep subwavelength field confinement(mode size<10 nm)of surface plasmons in the ultrathin metallic film(thickness<4 nm),the Purcell enhancement of the metallic bowtie antenna improves by more than 25 times when the metal thickness decreases from 20 nm to 2 nm.In the hybrid nanostructures by combining an ultrathin metallic bowtie antenna with a silicon antenna,the Purcell enhancement(Fp≈2.6×10⁶)in the hybrid nanostructures is 63 times greater than those(≤4.1×10⁴)in the previous metallic and hybrid nanostructures.Because of the reduced ratio of electromagnetic fields in the ultrathin metallic bowtie antenna when the high-index silicon antenna is under the quasi-BIC state,a high quantum yield(QY≈0.70)is obtained.Moreover,the good radiation directivity of the quasi-BIC(bound state in the continuum)mode of the silicon antenna and the reflection of the metallic substrate result in a high collection efficiency(CE≈0.71).Consequently,the overall enhancement factor of brightness of a SPE in the hybrid nanostructure is EF?≈Fp×QY×CE≈1.3×10⁶,which is 5.6×10² times greater than those(EF?≤2.2×103)in the previous metallic and hybrid nanostructures.     

手性Salen-Cu(Ⅱ)和唑啉-Cu(Ⅱ)配合物催化2-苯基环己酮的不对称Baeyer-Villiger反应研究

对一系列手性Salen和唑啉配体与中心金属Cu(Ⅱ)的配合物催化2-苯基环己酮的不对称Baeyer-Villiger反应进行了研究,设计和合成了新型手性配体Ⅲ,Ⅳ, Ⅴ,对配合物Ⅴ-Cu(Ⅱ)进行了单晶X射线衍射分析. 并考察了助氧化剂、溶剂等对反应活性和选择性的影响.