Investigation of the Quasi Binary System BaAu–BaPt

Phase equilibria in the system BaAu–BaPt have been investigated by X‐ray powder diffraction. Depending on composition, three structure types occur, the FeB type for BaAu, and NiAs for BaPt, while the CrB type of structure is adopted in between. The homogeneity range for the CrB type of structure was established to extend from BaPt_0.15Au_0.85 to BaPt_0.90Au_0.10. The respective lattice parameters vary linearly, in accordance with Vegard's law. The crystal structure of the new CrB type compounds have been confirmed by X‐ray powder diffraction for the solid solution range, and by single crystal X‐ray diffraction exemplary for the composition BaAu_0.5Pt_0.5 (Cmcm; a = 4.3915(5) Å; b = 11.9149(12) Å; c = 4.7920(5) Å; Z = 4). BaAu was also established by single crystal structure determination (Pnma; a = 8.3220(10) Å; b = 4.9252(10) Å; c = 6.3844(10) Å; Z = 4) to complete the results. According to ESCA measurements BaAu_0.5Pt_0.5 and BaAu can be formulated as [Ba²⁺·0.5e^?]·[Au^?_0.5·Pt^2?_0.5] and [Ba²⁺·e^?]·[Au^?], respectively.     

Hydrogenolysis of the cyclopropyl group into an isopropyl group in the presence of a platinum catalyst and hydrobromic acid

Reduction of cyclopropylmethylamines proceeded under mild reaction conditions in the presence of platinum (IV) oxide catalyst and hydrobromic acid at rt, providing isobutylamines and no linear butylamines. The ring cleavage reaction was widely applicable to cyclopropane rings in various compounds such as N-cyclopropylalkyl, O-cyclopropylalkyl, and C-cyclopropylalkyl derivatives. Although unactivated cyclopropane rings were also cleaved, the cyclobutane ring was tolerated under the same reaction conditions.     

Fabrication of SU-8 based microchip electrophoresis with integrated electrochemical detection for neurotransmitters

A new SU-8 based microchip capillary electrophoresis (MCE) device has been developed for the first time with integrated electrochemical detection. Embedded electrophoretic microchannels have been fabricated with a multilayer technology based on bonding and releasing steps of stacked SU-8 films. This technology has allowed the monolithic integration in the device of the electrochemical detection system based on platinum electrodes. The fabrication of the chips presented in this work is totally compatible with reel-to-reel techniques, which guarantee a low cost and high reliability production. The influence of relevant experimental variables, such as the separation voltage and detection potential, has been studied on the SU-8 microchip with an attractive analytical performance. Thus, the effective electrical isolation of the end-channel amperometric detector has been also demonstrated. The good performance of the SU-8 device has been proven for separation and detection of the neurotransmitters, dopamine (DA) and epinephrine (EP). High efficiency (30,000-80,000 N/m), excellent precision, good detection limit (450 nM) and resolution (0.90-1.30) has been achieved on the SU-8 microchip. These SU-8 devices have shown a better performance than commercial Topas (thermoplastic olefin polymer of amorphous structure) microchips. The low cost and versatile SU-8 microchip with integrated platinum film electrochemical detector holds great promise for high-volume production of disposable microfluidic analytical devices.     

Study on Electrocatalytic Activity of Platinum for Hydrogen Oxidation in Acidic Solution by Scanning Electrochemical Microscopy

The electrocatalytic activity of platinum for hydrogen oxidation in 0.01 M H₂SO₄ + 0.1 MNa₂SO₄ solution has been investigated by scanning electrochemical microscopy (SECM) technique. The cyclic voltammogram (CV), approach curve, area scan imaging and chronoamperometric methods have been used. The results indicate that the imaging capability of the SECM feedback mode can be used more efficiently to visually identify materials' electrocatalytic activity, compared with the approach curve method for identification of the conductive or insulating nature of a surface. The SECM imaging method has demonstrated the effects of Pt substrate potential on the electrocatalytic oxidation of hydrogen under a constant tip potential. It is found that the more positive the Pt substrate potential, the lower the electrocatalytic activity of the Pt. Furthermore, the chronoamperometric results support the variation of the electrocatalytic activity with the Pt substrate potential as well.     

Synthesis, characterization, photophysics and electrophosphorescent applications of phosphorescent platinum cyclometalated complexes with 9-arylcarbazole moieties

A series of cyclometalating platinum(II) complexes with substituted 9-arylcarbazolyl chromophores have been synthesized and characterized. These complexes are thermally stable and most of them have been characterized by X-ray crystallography. The phosphorescence emissions of the complexes are dominated by ³MLCT excited states. The excited state properties of these complexes can be modulated by varying the electronic characteristics of the cyclometalating ligands via substituent effects, thus allowing the emission to be tuned from bright green to yellow, orange and red light. The correlation between the functional properties of these metallophosphors and the results of density functional theory calculations was made. Because of the propensity of the electron-rich carbazolyl group to facilitate hole injection/transport, the presence of such moiety can increase the highest occupied molecular orbital levels and improve the charge balance in the resulting complexes relative to the parent platinum(II) phosphor with 2-phenylpyridine ligand. The solution-processed electrophosphorescent organic light-emitting diodes doped with these platinum-based phosphors have been fabricated which showed a maximum external quantum efficiency of 2.77% for the best device, corresponding to a power efficiency of 3.48 lm/W and a luminance efficiency of 8.49 cd/A. The present work enables the rational design of platinum-carbazolyl electrophosphors by synthetically tailoring the structure of carbazolylpyridine ring that can permit good color-tuning versatility suitable for multi-color display technology.     

Chiral bisimidazolium salts derived from amino acids and their palladium(II)- and platinum(II)-biscarbene complexes

We report new chiral bisimidazolium salts synthesized from naturally occurring l-amino acids. They served as precursors for bidentate N-heterocyclic carbene metal complexes. The chiral imidazoles could be synthesized in good yields via a one-pot ring closing reaction, followed by esterification. The methylene bridged bisimidazolium iodide salts are accessible in moderate yields. Corresponding palladium(II)- and platinum(II)-NHC complexes could be synthesized and fully characterized, but do not show optical activity. We also report a solid state structure of one of the synthesized palladium(II) biscarbene compounds derived from alanine.     

Copper(II), palladium(II) and platinum(II) chloride complexes with 5-amino-2-tert-butyltetrazole: Synthesis, characterization and cytotoxicity

Complexes CuL₃Cl₂, PdL₂Cl₂ and PtL₂Cl₂, where L is a novel ligand from the series of 2-substituted 5-aminotetrazoles, namely 5-amino-2-tert-butyltetrazole (1), have been synthesized by the reaction of metal(II) chlorides with 1 and characterized by IR spectroscopy, thermal and X-ray analyses. The crystallographic structural analysis of these complexes revealed that 1 acts as a monodentate ligand coordinated to the metal via endocyclic N4 atom. Platinum complex demonstrates promising cytotoxicity against human cervical carcinoma cells with IC₅₀ value average between those of cisplatin and carboplatin.     

采用CO吸附原位红外光谱研究Pt/TiO_2光催化体系中助催化剂作用

采用CO作为探针分子,将原位透射红外光谱应用于研究助催化剂Pt在Pt/TiO2光催化体系中的作用.实验发现,光照条件下,CO的覆盖度及样品温度没有明显变化,CO在Pt/TiO2上的吸附峰红移11 cm–1,在Pt/Al2O3上的吸附峰没有位移,表明CO在Pt/TiO2上的红移来源于TiO2上的光生电子转移到Pt上,这解释了为什么加入Pt助催化剂可提高光催化产氢活性.     

A Tin(IV) Porphyrin with Two Axial Organometallic NCN‐Pincer Platinum Units

A tin(IV) porphyrin was combined with two axial NCN‐pincer platinum(II) fragments by utilizing the oxophilicity of the apical positions on the tin atom and the acidic nature of the NCN‐pincer platinum derived benzoic acid. The solid‐state structure determined by X‐ray crystallography revealed some close contacts between the pincer complexes and the meso‐p‐tolyl subsitutents of the porphyrin. It was shown by ¹H NMR spectroscopy that these close contacts were not present in solution and that this compound can potentially act as a novel building block for supramolecular architectures.     

Electronic structure and vibrational spectra of cis-diammine(orotato)platinum(II), a potential cisplatin analogue: DFT and experimental study

Orotic acid (vitamin B₁₃) is a key intermediate in biosynthesis of the pyrimidine nucleotides in living organisms, moreover, it may serve as the biological carrier for some metal ions. cis-Diammine(orotato)platinum(II), cis-[Pt(C₅H₂N₂O₄)(NH₃)₂] can be considered as a new potential cisplatin analogue. The FT-Raman and FT-IR spectra of the title complex are reported, for the first time. The molecular structure, vibrational frequencies, and the theoretical infrared and Raman intensities have been calculated by the density functional mPW1PW91 method. The detailed vibrational assignment has been made on the basis of the calculated potential energy distribution. The theoretically predicted IR and Raman spectra show very good agreement with experiment. Natural bond orbital (NBO) analyses were performed for cisplatin, carboplatin and the title complex. The results provided new data on the nature of platinum–ligand bonding in these compounds. Strong intramolecular hydrogen bond between the orotate ligand and the coordinated ammonia group stabilizes the structure of the platinum(II) complex. Thus, it is suggested that the orotate ligand in the title complex is more inert to the substitution reactions than the chloride ligands in cisplatin.