A C2 Fragment as Four‐Electron σ Donor

The formation and X‐ray structure analysis of the Pt^IV complex [(CH₂C{PPh₂C₆H₄}₂)PtI₂] is reported. The molecule possesses the orthometalated ligand (PPh₃)₂C→CH₂, which serves via its C₂ fragment as an unprecedented four‐electron σ donor.     

氧化铁对铂在碱性介质中催化氧化甲醇的促进作用

Pt催化剂是电催化领域用途最为广泛的贵金属催化剂.Pt资源稀缺,价格昂贵,同时它的物理化学特性又决定了其在多种催化反应中难以被替代.在质子交换膜燃料电池的小分子醇类电氧化过程中,难免存在Pt的毒化现象,其催化性能有待进一步提升.因此,围绕着Pt催化剂纳米结构的设计、抗毒性及反应机理的探索一直是电催化研究面临的重要课题.目前,已被广泛认可的提高Pt催化性能的方法之一是引入第二种金属,通过金属间协同效应(双功能机理)、张力效应或电子效应等对Pt的催化行为进行改性.对于由双/多金属组成的纳米结构催化剂,无论是协同效应还是电子效应,催化活性的提高都需要金属间有丰富的接触界面和恰当的邻近状态.通过调变两组元的种类、原子比和接触状态等可以实现对金属-金属界面的调控,进而调变催化剂性能.除金属助剂外,金属氧化物对Pt催化剂的助催化作用也引起广泛关注.由于金属氧化物与Pt之间的密切接触作用,氧化物的形貌特点对Pt的催化性能可产生重要影响.到目前为止,有关催化剂形貌效应的研究主要集中于贵金属纳米颗粒上(Pt,Au,Pd等),但关于金属氧化物载体/助剂的形貌对贵金属催化性能影响的研究尚不多.具有明确形貌的金属氧化物载体/助剂,暴露的晶面不同,表面原子的配位状态也不同,从而造成与之密切接触的Pt的性质发生改变.因此,金属氧化物的表面性质以及Pt-金属氧化物的界面性质将对电催化性能产生重要影响,深入阐释贵金属-金属氧化物的表/界面性质以及建立有效的构效关系,对设计和制备高效电催化剂具有一定的指导意义.为了提高Pt基催化剂活性、抗CO中毒能力以及稳定性,本文采用共沉淀法和水热法分别制备了纳米棒和六边形纳米片状的Fe2O3作为Pt催化剂的助剂,考察了助剂形貌对Pt催化剂在碱性介质中催化氧化甲醇的促进作用.通过X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱以及电化学技术对催化剂进行了表征.结果显示,Fe2O3的存在能显著提高Pt催化剂在碱性介质中对甲醇氧化的电催化性能,而且以Fe2O3纳米棒为助剂制备的Pt-Fe2O3/C-R催化剂催化活性以及稳定性比Fe2O3纳米片为助剂制备的Pt-Fe2O3/C-P催化剂更高.这种促进效应可能与助剂Fe2O3的形态有关.Pt-Fe2O3/C-R催化剂中Pt的质量比活性为5.32 A/mgPt,本征活性为162.7 A/m2Pt,分别是Pt-Fe2O3/C-P催化剂的1.67和2.04倍,是商业PtRu/C样品的4.19和6.16倍.协同效应和电子效应是Pt催化性能提升的主要原因.此外,Pt-Fe2O3/C-R样品中高价态Pt的含量较高,可能也是加速甲醇氧化反应动力学的原因之一.高价态的Pt可能会增强甲醇分子在Pt表面的吸附强度,促进Pt上甲醇氧化反应初始步.这些发现不仅可对甲醇电催化氧化机理有了更深的理解,而且对设计和制备高性能甲醇氧化电催化剂也具有一定的指导意义.     

A re-examination of platinum-group element concentrations in the environmental certified reference material BCR-723

A detailed statistical examination of replicated data used to certify platinum-group elements (PGEs) in environmental reference material BCR-723 is presented. Certification of Pt, Pd, and Rh concentrations in BCR-723 was based on 16, eight, and nine accepted data sets, respectively. Each accepted data set contained six replicated measurements for each PGE, and the statistical properties of these concentration data were examined, i.e. 96 for Pt, 48 for Pd, and 54 for Rh. This level of investigation has received limited attention but is critical in furthering our understanding of PGE variability and representativeness. Concentrations of Pt, Pd, and Rh were shown to differ significantly between accepted data sets. Palladium and Pt differed in their quantification between detection techniques. Additionally, Pd and Pt concentrations varied significantly between laboratories using a similar definitive method (inductively coupled plasma-isotope dilution mass spectrometry). The distribution of Pd concentrations was found to be bimodal, with a secondary population exhibiting a contamination signal of about 15%. The secondary population, not previously reported in BCR-723, is likely a measurement artifact and not due to a nugget effect. Comparisons of BCR-723 with other environmental media from Europe, i.e. airborne particulate matter, tunnel dust, and road-deposited sediment, indicated that Pd is uncommonly low in BCR-723 (6.0?ng?g^?1) and is generally not representative in terms of its distribution relative to Pt and Rh. Serious consideration should be given to developing a new PGE certified environmental reference material.     

氢气对正丁烷/空气混合物催化着火的热作用和化学作用

通过对正丁烷/氢气/空气混合物在Pt 催化表面的详细反应机理分析, 研究了氢气添加对正丁烷/空气混合物催化着火过程的影响. 研究发现, 在正丁烷/空气混合中添加氢气有助于正丁烷在更低的温度下实现催化着火, 而且不同的氢气添加量对混合物的着火温度和着火过程呈现不同的影响: 当氢气添加量较小时, 氢气的作用主要呈现为热影响; 而当氢气添加量较大时, 氢气的作用主要呈现为化学影响. 这些结果与实验结果是一致的. 本文进一步确定了发挥不同作用的氢气添加量的范围, 并分别对热作用和化学作用情况下的着火启动反应进行了动力学分析.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

制备方法对Al2O3掺杂Pt/WO3-ZrO2催化剂上正庚烷异构化反应的影响

采用恒pH法和非恒pH法制备了Al₂O₃掺杂的Pt/WO₃/ZrO₂催化剂,并用N₂吸附-脱附、X射线衍射、紫外-可见漫反射、CO化学吸附、X射线光电子能谱、²⁷Al魔角旋转核磁共振和吡啶吸附红外等技术对催化剂进行了表征.结果表明,相比于非恒pH法制备的催化剂,恒pH法制备的催化剂具有较高的比表面积和Pt分散度,在H₂气氛中产生更多的B酸位,从而表现出更高的催化正庚烷临氢异构化反应活性; 在200℃和质量空速0.9h^-1的反应条件下,正庚烷转化率达70.0%,明显高于非恒pH法制备的催化剂(43.5%).     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Pt–Al2O3 nanocoatings for high temperature concentrated solar thermal power applications

Nano-phased structures based on metal–dielectric composites, also called cermets (ceramic–metal), are considered among the most effective spectral selective solar absorbers. For high temperature applications (stable up to 650 °C) noble metal nanoparticles and refractory oxide host matrices are ideal as per their high temperature chemical inertness and stability: Pt/Al₂O₃ cermet nano-composites are a representative family. This contribution reports on the optical properties of Pt/Al₂O₃ cermet nano-composites deposited in a multilayered tandem structure. The radio-frequency sputtering optimized Pt/Al₂O₃ solar absorbers consist of stainless steel substrate/ Mo coating layer/ Pt–Al₂O₃/ protective Al₂O₃ layer and stainless steel substrate/ Mo coating layer /Pt–Al₂O₃ for different composition and thickness of the Pt–Al₂O₃ cermet coatings. The microstructure, morphology, theoretical modeling and optical properties of the coatings were analyzed by the x-ray diffraction, atomic force, microscopy, effective medium approximation and UV–vis specular and diffuse reflectance.     

新试剂NSPAR固相萃取光度法测定氰化渣中铂的研究

在pH2.5的氯乙酸NaOH缓冲介质中,吐温80存在下,磺硝酚偶氮若丹宁(NSPAR)与铂反应生成2∶1稳定络合物,该络合物可被WatersSep PakC18小柱固相萃取,用氮氮二甲基甲酰氨(DMF)洗脱后用光度法测定。在洗脱液介质中,λmax=535nm,摩尔吸光系数ε=6.33×104L·mol-1·cm-1。铂质量浓度在0 001～0 080μg/mL内符合比尔定律,本方法可用于氰化渣中铂的测定。     

Redox behaviour of thermally activated platinum electrodes with particular reference to operation at elevated temperature

The present work is a continuation of an earlier investigation of the effect of severe thermal pretreatment on the redox properties of platinum electrodes in aqueous media. The most interesting observation was that raising the solution temperature to ca. 75 °C resulted in a dramatic anodic response in the positive sweep at ca. 0.25 V (RHE). Such behaviour was noted earlier at room temperature but only when the thermally pretreated sample was further activated by cathodic polarization. This transition at 0.25 V was partially reversed on the negative sweep, but the cathodic process involved was subject to severe inhibition. There is independent evidence for similar behaviour for gold in aqueous acid solution. The relevance of the present results to the operation of fuel cell anodes is outlined. Received: 2 December 1999 / Accepted: 24 February 2000