Two-stage adaptive PMD compensation in 40-Gb/s OTDM optical communication system

An experiment of two-stage adaptive compensation for polarization mode dispersion (PMD) in a 40-Gb/s optical time-division multiplexed communication system is reported. The PMD monitoring technique based on degree of polarization was adopted. The particle swarm optimization (PSO) algorithm was introduced in adaptive PMD compensation. The comparison was made to estimate the effectiveness between PSO algorithms with global neighborhood structure (GPSO) and with local neighborhood structure (LPSO).The LPSO algorithm is shown to be more effective to search global optimum for PMD compensation than GPSO algorithm. The two-stage PMD compensator is shown to be effective for both first- and second order PMD, and the compensator is shown to be bit rate independent. The optimum searching time is within one hundred milliseconds.     

利用三维构效关系确定互变异构抑制剂的活性构象

HPPD酶抑制剂NTBC存在多种互变异构体,其优势构象受溶液环境影响显著,不同的观测手段确定NT-BC的优势结构存在差异.本文首次采用了三维构效关系CoMFA和CoMSIA对NTBC类似物的5种可能的活性构象进行了研究.根据NTBC类似物以离子为活性构象得到的CoMFA模型具有最佳预测能力,推测NTBC以离子形式与HPPD键合,该结论与文献通过动力学实验预测的结合模式相吻合,这对进一步研究HPPD与NTBC的作用机理以及开发高效抑制剂提供了理论依据.     

An experiment of automatic PMD compensation in 40-Gb/s RZ optical communication system

An experiment of adaptive polarization mode dispersion (PMD) compensation for 40-Gb/s return-to-zero (RZ) optical communication system is reported. In the experiment, degree of polarization (DOP) is used as feedback signal and particle swarm optimization (PSO) method is adopted as logic control algorithm. The compensation time is about 200 ms, the compensated differential group delay (DGD) is up to 30 ps, and bit error rate (BER) of 10-9 is reached when PMD compensation is employed.     

基于聚合物／金属纳米结构镶嵌型柔性基底的表面增强拉曼光谱技术

表面增强拉曼光谱（SERS）技术可极大增强传统拉曼光谱的信号强度,从而拓展拉曼光谱的应用范围．针对SERS技术在分析对象、分析环境的普适性和分析效率方面的限制,本文设计并发展了一种透明、柔性、自支撑SERS基底的制备、保存和使用方法．该基底由聚合物聚甲基丙烯酸甲酯（PMMA）和在其表面镶嵌的金属纳米结构组成,可以通过背入射法用于任意形貌样品表面的直接和在线检测．柔性SERS（Ag）基底在R6G水溶液表面的检测限小于1pmol／L．     

单压过热蒸汽余热锅炉变工况解析解

主要符号说明符号：Cp比热DT温差F换热面积G工质流量H比焓值K换热系数L汽化潜热Q换热量Re余热回收率T温度Tg1烟气在蒸发器出口处的温度保热系数下标：a接近点e出口参数E省煤器g烟气d进口参数p节点B蒸汽V蒸发器B水0设计工况参数1序言余热锅炉是动力装置中余热回收的主要设备,由于余热锅炉的烟气侧热源变动大,因此在热力系统分析时,经常要对余热锅炉的各种工况的性能作出预报。余热锅炉变工况计算方法很多,但公开发表的文献较少。其中基于已知余热锅炉各部件详细尺寸,用类似于锅炉校核计算的方法进行变工况计算是比较精确的方法l…     

多元掺杂尖晶石型Li1.02MxMn2-xQyO4-y正极材料的电化学特性

The effect of doping on the electrochemical performance was studied for spinel type Li_1.02M_xMn_2-xQ_yO_4-y used as cathode material in lithium-ion battery. TG/DTA curves of the precursor(the raw materials) doped with different elements were studied. The spinel materials Li_1.02Mn₂O₄, Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98, Li_1.02Co_0.02Cr_0.01 La_0.01Mn_1.96Cl_0.02O_3.98, Li_1.02Co_0.02La_1.02Mn_1.97Cl_0.02O_3.98, Li_1.02Co_0.02Cr_0.01Mn_1.97O₄, were prepared by solid-state reaction method after the pretreatment of conversion under low temperature and uniform mixing. X-ray diffraction patterns showed that all the samples had perfect spinel structure. SEM indicated that the particles of the samples had uniform size and were distributed evenly. The results of the charge/discharge curves showed that Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 had better performance than other materials according to the inhibition of decline of reversible capacity of spinel Li_1.02M_xMn_2-xQ_yO_4-y. Therefore, cycle performance had been improved so obviously that 93.9% of the initial capacity were preserved after 100 cycles. Furthermore, electrochemical impedance tests were carried out with the spinel Li_1.02Co_0.02Cr_0.01La_0.01Mn_1.96F_0.02O_3.98 as working electrode, Lithium as counter electrode and reference electrode. Results showed that this material possessed good charge/discharge reversible capability and had the lowest impedance in 3.95～4.25 V range (on the stage of charge / discharge).     

十八烷基离子液体杂化固相微萃取整体柱用于检测咖啡中的多环芳烃

以自制的1-十八烷基-3-(γ-三乙氧基硅基丙基)咪唑溴盐离子液体(C18IL)、二苯基二甲氧基硅烷(DDS)和四乙氧基硅烷(TEOS)为功能单体,采用溶胶-凝胶法制备了烷基咪唑基离子液体管内固相微萃取整体柱(C18IL in-tube SPME).以多环芳烃为分析对象,考察了C_(18)IL含量对C_(18)IL in-tube SPME萃取性能的影响,并对萃取条件进行了优化.建立了基于C_(18)IL in-tube SPME-气相色谱(GC-FID)的分析方法,用于检测萘、芴、菲、荧蒽和芘5种多环芳烃.该方法的检出限(S/N=3)为0.007~0.072μg/L,定量限(S/N=10)为0.023~0.24μg/L,日内和日间精密度(RSD)除菲类多环芳烃外均小于10%.将该方法用于检测咖啡中5种多环芳烃,3个不同浓度下的加标回收率为85.79%~103.42%.     

X射线荧光光谱法测定灰岩中14种主次量元素

采用X射线荧光光谱法对灰岩中的Ca,Mg,Si,K,Na,Fe,Al,Ti,P,S,Mn,Sr,Ba,Cl等14种元素进行同时测定,采用硼酸镶边垫底的粉末压样法,优化了测量条件。对比较轻的元素,采用经验影响系数法校正基体效应,对于较重的元素,采用理论α影响系数法校正基体效应。分析标准参考物质GBW 07132,各元素的精密度(RSD)为0.1%~5.9%,分析标准参考物质GBW 07130,各元素的测定值与标准值相符,该方法对各元素的测定范围宽、速度快。     

金属规则表面形貌影响二次电子产额的解析模型

表面形貌是影响二次电子发射特性的重要因素, 但目前仍缺乏刻画这一影响规律的解析模型. 本文通过分析发现表面结构的遮挡作用是影响二次电子发射特性的主要因素. 基于二次电子以余弦角分布出射的规律, 提出了建立表面形貌参数与二次电子产额之间定量关系的方法, 并以矩形槽和三角槽为例, 建立了电子正入射和斜入射时的一代二次电子产额的解析模型. 将推导的解析模型与Monte Carlo模拟结果和实验结果进行了比较, 结果表明本文建立的模型能够正确反映规则表面形貌的二次电子产额. 本文的模型对于反映常用规则结构影响二次电子出射的规律以及指导通过表面结构调控二次电子发射特性都具有参考价值.     

基于Zynq的不规则物体体积测量系统的设计与实现

为解决工业生产中原始物料体积的快速、准确测量与分级问题,设计了一种以Zynq-7000可扩展处理平台为核心的基于机器视觉的不规则物体体积测量系统。该系统通过摄像头采集物料图像,结合ARM与FPGA技术,并使用Vivado开发软件在ZyBo开发平台中进行了软硬件协同设计,最终实现了不规则物体体积测量算法的硬件加速。实验结果表明该系统可以准确的计算出不规则物体的体积,并能够达到工业生产的实时性要求,这将有效地提升原始物料分级的准确性,提高企业的经济效益和社会效益。