An experiment of automatic PMD compensation in 40-Gb/s RZ optical communication system

An experiment of adaptive polarization mode dispersion (PMD) compensation for 40-Gb/s return-to-zero (RZ) optical communication system is reported. In the experiment, degree of polarization (DOP) is used as feedback signal and particle swarm optimization (PSO) method is adopted as logic control algorithm.The compensation time is about 200 ms, the compensated differential group delay (DGD) is up to 30 ps,and bit error rate (BER) of 10-9 is reached when PMD compensation is employed.     

Two-stage adaptive PMD compensation in 40-Gb/s OTDM optical communication system

An experiment of two-stage adaptive compensation for polarization mode dispersion (PMD) iu a 40-Gb/s optical time-division multiplexed communication system is reported. The PMD monitoring technique based on degree of polarization was adopted. The particle swarm optimization (PSO) algorithm was introduced in adaptive PMD compensation. The comparison was made to estimate the effectiveness between PSO algorithms with global neighborhood structure (GPSO) and with local neighborhood structure (LPSO). The LPSO algorithm is shown to be more effective to search global optimum for PMD compensation than GPSO algorithm. The two-stage PMD compensator is shown to be effective for both first- and second-order PMD, and he compensator is shown to be bit rate independent. The optimum searching time is within one huudred milliseconds.     

壳聚糖——一种具有应用潜力的组织工程支架材料

作为一种生物相容及生物可降解的天然高分子化合物,人们对壳聚糖在生物材料领域应用潜力的认识日益深刻,应用的开发日益增强.本文通过对壳聚糖与生物材料相关特性的分析,根据目前的研究成果,指出壳聚糖是一种很有潜力的组织工程支架材料.     

Single and Double Chainlike Manganese Coordination Polymers of Linear Ligands: Synthesis,Structure and Magnetism

Two single and double chain manganese coordination polymers {[Mn(L1)(H_2O)_2]NO_3}_n(1) and [Mn(L2)_2(H_2O)]_n(2)(HL1 = 2,2?:6?,2??-terpyridine-4?-carboxylic acid, HL2 = 4?-(4-carboxyphenyl)-2,2?:6?,2??-terpyridine) have been synthesized hydrothermally, and characterized by elemental analysis, IR spectroscopy, and X-ray single-crystal diffraction. Compound 1 crystallizes in monoclinic space group P2/c, while 2 crystallizes in triclinic, space group P1. Crystal data for 1: C_(16)H_(14)MnN_4O_7, Mr = 429.25, a = 10.684(2), b = 9.338(1), c = 9.896(2) ?, β = 113.89(3)o, V = 902.7(3) ?~3, Z = 2, T = 153(2) K, Dc = 1.579 g/cm~3, μ = 0.780 mm-1, F(000) = 438, R = 0.1084, wR = 0.3507, and GOF = 1.069; For 2: C44 H30 MnN6 O5, Mr = 777.68, a = 11.255(2), b = 11.554(2), c = 15.417(3) ?, α = 107.28(3), β = 101.07(3), γ = 107.23(3)o, V = 1740.2(6) ?~3, Z = 2, T = 293(2) K, Dc = 1.484 g/cm3, μ = 0.440 mm~(-1), F(000) = 802, R = 0.0471, wR = 0.1050, and GOF = 0.948. In both compounds, the central Mn(Ⅱ) ions adopt the same distorted pentagonal-bipyramid geometry [MnN_3O_4] with different secondary structure units. L1 ligand adopts the μ_2-1κ~3N,N?,N??:2κ~2O,O? mode to coordinate with mononuclear manganese to build a single chainlike compound 1, while L2 employs μ_3-1κ~3N,N?,N??:2κ~2O,O?:3κ~1O and 1κ~1O modes to link dimeric Mn_2O_2 to exhibit a double chainlike 2. Both compounds display weak antiferromagnetic coupling interactions.     

超支化铬系催化剂的合成及乙烯齐聚性能研究

以正辛胺和十二胺为原料,分别制备了两种超支化PNP配体,通过引入金属铬活性位点的方法合成了具有不同烷基链长度的超支化PNP铬系催化剂.采用红外光谱(IR)、核磁共振磷谱(~(31)P-NMR)、核磁共振氢谱(~1H-NMR)、紫外光谱(UV)和质谱(MS)等表征方法证明合成催化剂的结构与理论结构预测相符.详细考察了催化剂用量、溶剂种类、反应条件以及配合物结构对乙烯齐聚性能的影响.实验结果显示,超支化PNP铬系催化剂在甲苯作溶剂,甲基铝氧烷(MAO)做助催化剂时表现出良好的催化乙烯齐聚性能,产物主要为低碳烯烃.在最佳条件下,催化活性最高可达到1.69×10~5 g·(mol Cr·h)~(-1),己烯和辛烯的选择性为43.3%以上.相同聚合条件下,其催化活性随着端基烷基链长度的增加而下降.     

磷灰石结构荧光粉Ba10(PO4)6F2:Ce3+,Tb3+的合成、发光和能量传递

采用高温固相法合成了系列Ce~(3+)和Ce~(3+)/Tb~(3+)激活的具有磷灰石结构荧光粉Ba_(10)(PO_4)_6F_2。用X射线衍射(XRD)、扫描电镜(SEM)、激发和发射(PLE和PL)光谱对样品进行了表征分析。研究结果表明:所合成的荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)具有氟磷灰石结构,样品微观呈现不规则形貌。荧光粉Ba10-x(PO4)6F2∶x Ce~(3+)的相对发射强度随着x增加而增强,当x=0.09时,荧光强度达到最大。荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的激发光谱为240～330 nm的宽带,发射光谱呈现出Ce~(3+)的5d→4f跃迁紫外光(335和358 nm)发射和Tb~(3+)的4f→4f跃迁绿光(542 nm)发射。光谱特性表明,发光过程中存在Ce~(3+)→Tb~(3+)能量传递,能量传递效率可以达到60%。计算Ce~(3+)和Tb~(3+)的临界距离为0.79 nm,能量传递机理是偶极-偶极交互作用。此外,详细论述了Ce~(3+)和Tb~(3+)之间的能量传递和发光的过程。通过调节Tb~(3+)的掺杂浓度,对荧光粉发光色坐标与Tb~(3+)的掺杂浓度之间的关系也进行了研究,随着Tb~(3+)的掺杂量从0增加0.52,荧光粉Ba_(10)(PO_4)_6F_2∶Ce~(3+),Tb~(3+)的发射光谱色坐标可以从(0.149 4,0.045 1)蓝色区变化到(0.280 1,0.585 3)绿色区。     

新型含磺酸基配体锰配合物的水热合成及其性能

采用水热法合成了单核锰配合物[Mn(H₂L)(phen)₂(H₂O)]（1, H₂L_2-=4,5-二羟基苯-1,3-二磺酸根离子,phen=1,10-邻菲罗啉）,其结构和性能经X-射线单晶衍射、红外光谱、荧光光谱、元素分析和热重分析表征。研究表明,配合物中锰离子是六配位的,与两个phen配体的四个氮原子配位以及水分子和磺酸基氧原子配位,形成扭曲的八面体配位构型。1的荧光发射峰与配体相比发生了蓝移,最大发射峰位于390 nm。     

氨水工质浓度可调型功冷联供循环

本文提出一个新型氨水工质功冷联供循环,由氨水Rankine子循环和氨吸收式制冷子循环通过吸收、分离及换热过程耦合而成,可采用燃气轮机排烟等中低温热源驱动.通过设置分流、吸收式冷凝实现系统内氨水工质浓度变换,兼顾动力子循环加热蒸发和冷凝过程不同的浓度需求,达到改善换热过程匹配和提高透平作功能力的目的.计算表明,当透平进气温度为450℃时,循环热效率达25%～28%,??效率达45%～53%;且存在最佳分流比使热效率及??效率达到最佳.     

超导磁体失超过程中Quench-Back效应的数值模拟研究北大核心CSCD

Quench-Back是一种诱发超导磁体内产生新的失超区从而加快失超传播的现象.合理利用Quench-Back效应进行失超保护,需要准确理解Quench-Back作用下磁体内部的传热与电磁过程.以实际工程中某超导螺线管磁体为例,建立了失超过程三维瞬态耦合热-电磁-电路模型.整个模型采用两个顺序耦合的子模型实现,子模型一为三维传热模型,子模型二为轴对称电磁-电路直接耦合模型.得到了失超过程电流,热点温度和内电压变化曲线,分析了Quench-Back效应对失超过程关键参数的影响,研究了Quench-Back加速失超传播的具体过程.研究结果表明:Quench-Back效应可以有效控制失超过程中磁体内的热点温度,降低磁体内的过电压;Quench-Back效应与骨架材料,线圈结构和失超起始位置关系密切.