尿素溶液法合成纳米AlN粉体

以尿素为固体氮源,甲醇为溶剂,AlCl3·6H2O为铝源,采用尿素溶液法制备了纳米AlN粉体.采用FT-IR对前驱盐进行了结构分析,并通过XRD和SEM分别对最终煅烧产物进行了结构和形貌的表征.重点研究了尿素/金属摩尔比R值和煅烧温度对合成产物的晶体结构和形貌的影响.结果发现: AlN的纯度随R值的增加而增大,R值大于6可以获得单一AlN相,R值小于6获得AlN和Al2O3的混合相;此外,R值也直接影响到AlN纳米粉体和团聚颗粒的形貌,所制备AlN纳米粉体的粒径和团聚的球状颗粒的粒径随R值的增加出现细化的趋势.     

Effect of monovalent salts on morphology of calcium carbonate crystallized in Couette‐Taylor reactor

Monovalent ionic additives, Na⁺, K⁺ and NHequation/tex2gif-stack-1.gif impact on the morphology and agglomeration of CaCO₃ crystals. As increasing the additive concentration, the regular shaped crystals such as rhombohedron and spindle are changed to irregular one due to the inclusion of Na⁺ and K⁺ into the crystal structure. The inclusion of Na⁺ and K⁺ is detected using ICP‐AES. The partition of coefficients of Na⁺ and K⁺ are estimated as 9.74 × 10^–4, 9.73×10^–4, respectively and the amount of inclusion in the crystals is about 2×10³ ppm. However, the inclusion of ions does not modify a crystal structure of calcite. Since NH₄⁺ is large in radius, it is not included in crystal but shifts the spindle shape of crystal to the rhombohedral one. It is interesting to find that such modification of crystal morphology begins to appear at high additive concentration (0.05 M). In addition, the crystal agglomeration is promoted because the electric repulsive charge is reduced as increasing the additive concentration. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electron tomography on nanopores embedded in epitaxial GaSb thin films

This work reports on the morphology of nanopores and their spatial position in group III-Sb based multilayer heterostructures grown by molecular beam epitaxy on Si(0 0 1) substrates. By using electron tomography based on dark-field scanning transmission electron microscopy, quantitative information in real space is obtained about individual nanopores unintentionally embedded in GaSb layers. For this purpose adequate needle-shaped samples have to be specifically prepared from the compact material system by focused ion beam. The three-dimensional reconstruction of the probed volume allows the determination of the spatial arrangement of the pores and the analysis of the detailed shape, i.e. the crystallographic facets. Based on these results, the nanopore's geometric shape is discussed with respect to the minimization of surface tension. The formation process can be explained by an agglomeration of vacancies which are generated during the heterostructure growth.     

A volume-agglomeration multirate time advancing for high Reynolds number flow simulation

A frequent configuration in computational fluid mechanics combines an explicit time advancing scheme for accuracy purposes and a computational grid with a very small portion of much smaller elements than in the remaining mesh. Two examples of such situations are the travel of a discontinuity followed by a moving mesh, and the large eddy simulation of high Reynolds number flows around bluff bodies where together very thin boundary layers and vortices of much more important size need to be captured. For such configurations, multistage explicit time advancing schemes with global time stepping are very accurate but very CPU consuming. In order to reduce this problem, the multirate (MR) time stepping approach represents an interesting improvement. The objective of such schemes, which allow to use different time steps in the computational domain, is to avoid penalizing the computational cost of the time advancement of unsteady solutions that would become large due to the use of small global time steps imposed by the smallest elements such as those constituting the boundary layers. In the present work, a new MR scheme based on control volume agglomeration is proposed for the solution of the compressible Navier-Stokes equations equipped with turbulence models. The method relies on a prediction step where large time steps are performed with an evaluation of the fluxes on macrocells for the smaller elements for stability purpose and a correction step in which small time steps are employed. The accuracy and efficiency of the proposed method are evaluated on several benchmarks flows: the problem of a moving contact discontinuity (inviscid flow), the computation with a hybrid turbulence model of flows around bluff bodies like a flow around a space probe model at Reynolds number 10⁶, a circular cylinder at Reynolds number 8.4 × 10⁶, and two tandem cylinders at Reynolds number 1.66 × 10⁵ and 1.4 × 10⁵.     

开管离子色谱柱的制备与表征

近年来,开管离子色谱(OTIC)的研究已取得重大进展,尤其是兼容OH^-淋洗液的OTIC柱的成功研制使OTIC梯度洗脱得以实现。该文介绍了各种OTIC柱的制备和表征方法,涵盖早期的二氧化硅开管柱和新近出现的有机聚合物基质开管柱,对静电乳胶附聚的OTIC柱的一系列表征方法进行了系统阐述,包括开管柱柱容量的实验测定和理论计算方法、固定相相同时填充柱与开管柱之间的联系、柱效改善方法以及开管柱均一性表征等。     

服务业集聚现象测度模型及其应用

服务业集聚测度是服务业集聚研究的核心环节。本文通过服务业集聚指标和服务业集聚动态面板模型,从静态和动态两方面分析了我国服务业空间集聚的特征和动态规律。研究表明,我国服务产业集聚程度总体偏低,生产性服务业较消费性服务业有较高的区域集聚趋势和较明显的企业集聚趋势。服务业集聚水平变化是产业集聚回复效应和随机效应共同作用的结果。政府应根据不同服务行业的集聚特征,积极引导和推进服务行业有效集聚。     

亚微米颗粒湍流团聚特性的实验研究

燃煤电厂亚微米颗粒物排放是造成大气环境污染和影响人体健康的重要因素。本文搭建亚微米颗粒湍流团聚实验平台,通过场发射扫描电镜(FESEM)对亚微米颗粒的团聚形貌进行微观表征以及扫描电迁移率粒径谱仪(SMPS)对亚微米颗粒团聚前后的粒径分布特性进行宏观测量。结果表明:亚微米颗粒湍流团聚形成多分叉颗粒树聚团结构,进口流速为0.8?5.3m/s条件下,PM1和PM0.1的脱除效率分别为5.6%?18.6%和7.0%?21.4%,且PM1和PM0.1的脱除效率曲线随速度变化呈现二次函数规律。     

Studies on the Chemical Synthesis of Nanosized Nickel Powder and its Stability

The synthesis of nanosized nickel colloids is investigated by using nickel chloride as the precursor, hydrazine as the reducing agent and palladium as the nucleation agent. High purity nickel can be obtained when the reaction temperature is above 80^°C. At a lower reaction temperature, nickel hydroxide is also present in the precipitate form. Starting concentration of nickel ion is a dominant factor in affecting colloidal sizes, while other parameters such as reaction temperature and quantity of poly(vinyl pyrrolidone) (PVP) exhibit only minor effects. Although PVP has some dispersion power, it is not capable of preventing nickel colloids from gradual agglomeration. Our study shows that the subsequent addition of poly(acrylic acid) (PAA) after synthesis can help to stabilize the nickel suspension. This stabilized suspension can then be de-stabilized by changing pH to lower than 4 and vice versa. This reversible stabilization–de-stabilization process is likely due to the behaviour of PVP–PAA complex in the aqueous solutions.     

分权竞争、协同意愿与城市群建设:考虑公平偏好的委托代理解释

互惠合作机制缺失和信息不对称影响了地方政府的区域协调投入,不利于城市群建设和经济高质量发展。在委托代理模型中引入公平偏好的基础上,重点讨论协作意愿和信息条件对努力水平的影响。发现公平偏好和信息条件都对代理人的努力水平产生影响,且代理人之间的信息分布更重要。地方政府努力水平依赖于相邻城市的协同意愿,满足公平偏好中的“互惠”行为;且信息对称情形下的努力水平均高于不对称情形。改善信息分布和引导公平偏好,有利于提高地方政府的区域协同投入而改善整体产出水平。城市群建设和区域协调发展需要健全的协调机制,以增强不同区域地方政府的互信水平和互惠机制,降低、消除区域间信息不对称情形,通过互惠性合作和投入提升区域经济效率、促进经济高质量发展。     

Exploring the Microstructure of YBCO Nanopowders

High temperature superconductor YBa2Cu3O7-π (YBCO) nanopowders were successfully prepared by a citrate pyrolysis technique. The phase formation and microstructure of the nanopowders were studied. The microstructure analysis shows that the obtained YBCO powders have very fine grains with a size around several tens of nanomaters. The suoerfine morphology reveals that the thermal agglomeration of the particles decreases with decreasing the annealing temperature and shortening the annealing time. In addition, the complete phase formation of YBCO depends upon the annealing temperature and the annealing time as well. So far, these nanopowders have been used to fabricate the melt-textured YBCO bulk materials.