深度学习与“课程思政”协同效应的策略研究——以医用物理学为例

以医用物理学为载体,以深度学习为核心,以达成"课程思政"对课程和学生的要求为目标,探讨了深度学习与"课程思政"的内在联系,在提出课堂教学困境的基础上,讨论了实现深度学习与"课程思政"协同效应的策略,包括提高参与程度、完善学习过程、建构知识的意义和采用多元评价方式.     

In-situ TEM observation of the evolution of helium bubbles in Mo during He+ irradiation and post-irradiation annealing

The evolution of helium bubbles in purity Mo was investigated by in-situ transmission electron microscopy (TEM) during 30 keV He⁺ irradiation (at 673 K and 1173 K) and post-irradiation annealing (after 30 keV He⁺ irradiation with the fluence of 5.74×10¹⁶ He⁺/cm² at 673 K). Both He⁺ irradiation and subsequently annealing induced the initiation, aggregation, and growth of helium bubbles. Temperature had a significant effect on the initiation and evolution of helium bubbles. The higher the irradiation temperature was, the larger the bubble size at the same irradiation fluence would be. At 1173 K irradiation, helium bubbles nucleated and grew preferentially at grain boundaries and showed super large size, which would induce the formation of microcracks. At the same time, the geometry of helium bubbles changed from sphericity to polyhedron. The polyhedral bubbles preferred to grow in the shape bounded by {100} planes. After statistical analysis of the characteristic parameters of helium bubbles, the functions between the average size, number density of helium bubbles, swelling rate and irradiation damage were obtained. Meanwhile, an empirical formula for calculating the size of helium bubbles during the annealing was also provided.     

一种基于特征值反求的复合材料层合板波动特性的近似修改方法

采用一种特征值反求形式的方法用来近似层状复合板的波动特性修改。通过敏感度分析,确定层合板中能最显著地改变结构波动特性的结构参数为设计变量。采用二阶泰勒展式近似特征值和特征频率相对于设计变量的改变率。计算了不同结构变化时的色散特性,并与精确计算结果进行了比较。结果证明本方法对于层状复合板波动特性修改的近似是可行并且有效的。     

(聚酰胺-胺树枝状大分子)-水杨醛席夫碱钯配合物的Heck反应催化性能研究(英文)

用元素分析、红外光谱、紫外光谱、荧光光谱和核磁等分析手段对合成出的1.0G树枝状大分子-水杨醛席夫碱钯配合物(PAMAMSAPd)进行了表征。用其作为催化剂,研究了碘代苯与丙烯酸在有机溶剂中的偶联反应。对于碘代苯与丙烯酸的偶联反应,最佳反应条件为:惰性气氛,10mmol PhI,nPhI∶nAA∶nEt3N=1∶1.5∶2.5,3.0×10-3g PAMAMSAPd, 4mL DMF和100°C的反应温度。在该条件下,产物肉桂酸的产率可达96.5%。该树枝状大分子配合物是一种无磷、高效和稳定的Heck反应催化剂。且该催化剂经简单的过滤、溶剂洗涤进行回收,重复使用3次,产率仍能达到90.2%。     

联苯并咪唑化合物的合成、表征与抗癌活性

以联苯四胺、芳香醛为原料,DMF为溶剂,KI为催化剂,在空气存在下回流反应,合成了6种新的联苯并咪唑化合物,产率较高(58.4%～98.0%),其结构用IR、1HNMR、13CNMR、MS、元素分析等测试技术进行了表征。适宜的合成条件是:反应温度150℃,反应时间12h。初步测试表明,目标化合物对培养人肝癌Bel-7402细胞生长有一定抑制活性。     

Formation Mechanism and Stability Study of Konjac Glucomannan Helical Structure

The formation mechanism and stability of konjac glucomannan (KGM) helical structure were investigated by molecular dynamic simulation and experimental method. The results indicate that the molecular conformation of KGM is a non-typical helical structure. In detail, helical structure of KGM is mainly sustained by acetyl group, whose size and stability are affected by the molecular polymerization degree of KGM. In vacuum among the non-bonding interactions, electrostatic force is the greatest factor affecting its helical structure, but in water solution, hydrogen bond affects the helical arrangement greatly. To our interest, temperature exhibits a reversible destroying effect to some extent; the helical structure will disappear completely and present a ruleless clew-like arrangement till 341 K. This work suggests that the method of combining molecular dynamic simulation and experiment tools can be effective in the study of KGM helical structure.     

验证辐射强度与距离平方反比率的实验

利用Nal闪烁谱仪测量了在探测器与放射源间某个距离下对应的计数率.对测量的数据分别利用等精度最小二乘法和未知参数逼近法进行了处理,观察到在某些未知参数下,最小二乘法引起的误差很大,利用未知参数逼近法得到的值能和真实值较好接近,从而验证了辐射强度与距离平方反比率.     

轴向分区双频磁绝缘线振荡器的数值模拟

 为了便于模式变换器的设计,达到双频微波都能集中辐射的目的,提出一种轴向分区的双频磁绝缘线振荡器,该器件束波互作用区为中间隔开、两端不同周期、不同深度的慢波结构,使电子在上下游与不同频率特性的慢波结构进行束波互作用,得到稳定的双频微波输出。使用2.5维全电磁粒子模拟软件进行数值模拟,在工作电压450 kV,电流40 kA条件下输出微波功率为1.4 GW,功率效率约为7%,输出的微波频率分别为1.25 GHz和1.65 GHz,两者频谱幅度相差约为1.5 dB,模式为TEM模。     

基于阵列式连体透镜的LED二次光学设计

针对LED照明系统中单颗LED及其透镜组合设计的发光量小,照射范围有限,不能满足实际照明需求的问题,提出了一种阵列式连体透镜的LED二次光学设计.根据阵列式LED的特性建立多颗了LED光学模型,并运用光学仿真软件TracePro对该二次光学设计进行模拟与仿真.结果表明,阵列式连体透镜在改善光照均匀性方面具有较好的效果,...     

活塞激光热负荷应力场数值模拟

活塞激光热负荷就是通过光学转光片改变激光在空间的能量分配比例.结合活塞激光热负荷试验工况,建立了活塞激光热负荷应力场模拟数学物理模型,模型中考虑了材料的热物性参数随温度的变化.结果表明:由于活塞顶凹坑位置靠近通油孔,导致其应力波动幅值比激光辐照区域大;活塞凹坑、通油孔和靠近活塞顶面的活塞内腔由于和冷却介质直接接触,是活...