氯化铜催化偶联合成4-烷基联苯

4-烷基联苯是重要的液晶中间体. 以氯化铜为C—C键偶联反应催化剂, 经过对溴联苯的Grignard试剂直接与溴代烷烃发生偶联反应, 成功合成了一系列4-烷基联苯类化合物, 部分化合物产率高达91%左右, 并对其反应条件进行了初步研究; 所合成化合物结构都经过元素分析、红外光谱、核磁共振氢谱和质谱鉴定. 与现有方法相比, 此合成方法收率高、环境友好、成本相对较低.     

沙坦联苯的合成研究

以邻氯苯甲腈和对甲基苯硼酸为原料,绿色溶剂水和PEG400为混合溶剂,经Suzuki偶联反应合成了沙坦联苯(2-氰基-4'-甲基联苯)。目标化合物经1H NMR、13C NMR表征。考察了反应温度、反应时间对反应的影响,研究了目标产物的分离纯化,分离产率63%,纯度99.3%(HPLC)。     

含联苯醚结构2(5H)-呋喃酮衍生物的合成

以硫酸为催化剂,不同4'-烷氧基-4-羟基联苯与粘卤酸在甲苯溶剂中回流,经脱水醚化反应合成了16个新型的5-(4'-烷氧基-4-联苯氧基)-3,4-二卤-2(5H)-呋喃酮化合物,产率30%~58%(大部分47%以上).中等产率可能与该酸催化的反应为SN2亲核取代反应有关.新化合物的结构经FTIR,UV,1H NMR,13C NMR和元素分析确证.这些具有不同生物活性基团化合物的设计与合成,为新型2(5H)-呋喃酮衍生物的合成,以及由不同羟基化合物合成芳香醚类化合物提供了参考.     

Gemini型季铵盐阳离子表面活性剂催化双烷基联苯酮的还原

本文报道了通过黄鸣龙还原反应还原长链烷基联苯酮,合成了三种长链烷基联苯,其中的两种化合物首次报道.以联吡啶季铵盐为相转移催化剂对双烷基联苯酮的黄鸣龙还原反应进行催化,产率提高了20%～40%,反应时间从55小时缩短为23小时.作为对比,十六烷基三甲基溴化铵、溴代十六烷基吡啶、十二烷基苯磺酸钠也作为催化剂对双烷基联苯酮进行催化还原,结果表明Gemini表面活性剂在双烷基联苯酮的还原中较上述三种传统表面活性剂具有更好的催化性能.     

铁促进的非活化芳烃的直接芳基化反应

联苯化合物在药物、农药、液晶材料等领域被广泛运用.联苯化合物的合成方法研究在最近三十年里取得了巨大的进展.特别是近几年发展起来的C-H活化直接芳基化反应受到了很大的重视.C-H活化直接芳基化反应已有很多的报道,但绝大多数是使用钯盐作为催化剂.因此发展新的过渡金属用于催化直接芳基化反应,使得合成联苯的过程更加绿色、经济、简便是一个具有挑战性的问题.     

钯碳催化下以甲酰肼为还原剂的卤代芳烃还原偶联反应研究

在Pd/C催化下, 以甲酰肼为还原剂, 卤代芳烃通过还原偶联反应能高选择性地合成相应的联苯化合物. 具有不同取代基的卤代芳烃的还原偶联反应产率在52%～94%之间.     

联苯类化合物的合成

联苯类化合物是一类极为重要的有机合成中间体,在有机合成中往往通过有机金属偶联反应构建此类化合物.以反应底物分类综述了近年来通过偶联反应合成此类化合物的方法,详细介绍了以卤代芳烃与芳基金属化合物为底物的反应.     

4,4'-二（羟甲基）联苯的合成

以4,4'-二（氯甲基）联苯为原料,经水解生成苄醇类化合物4,4'-二（羟甲基）联苯。采用¹HNMR, IR, HPLC对产物进行了表征。研究讨论了反应条件、催化剂等因素对产物含量和收率的影响,并且优化了4,4'-二（羟甲基）联苯的合成工艺,提出了可能的催化反应机理。结果表明：聚乙二醇作为催化剂,可与溶液中的阳离子发生络合,增强了亲核试剂的反应活性,提高了反应速率。在优化工艺下反应12 h,粗产品HPLC含量可达97.2%,收率93.9%。     

手性磷酸控制的不对称碳氢芳基化反应合成平面手性二茂铁化合物

报道了钯催化的分子内不对称C—H键芳基化反应.以简单易得的二茂铁羰基化合物为底物,Pd(CH_3CN)_4(OTf)_2为催化剂,使用手性磷酸作为唯一手性源,Buchwald类型联苯单膦配体,甲苯作溶剂,100℃进行反应,得到一系列二茂铁化合物,ee值最高可达83%.该反应为合成平面手性二茂铁化合物提供了一种新途径.     

芳伯胺和亚硝酸酯在沸苯溶液中的反应——联苯和芳基苯的合成

1.将十二种芳伯胺和亚硝酸正丁酯或异戊酯在沸苯溶液中反应,合成联苯、各种异构的甲基-、氯-和硝基-联苯以及苯基萘。产率令人满意。2.基于各种因素对联苯产率的影响的详细研究,找出用于合成的最适宜条件。3.实验证明在反应中产生的氢氧化重氮化合物与芳(?)胺偶合而生成的重氮氨基化合物是反应的中间产物之一。但氢氧化重氮化合物直接与苯作用而生成联苯和芳基苯也是可能的;这是在稀溶液中反应的主要途径。反应产物的生成可能是自由基历程。     

Synthesis of Novel Unsymmetric Bisbenzimidazoles

Using chloroacetic acid, p‐hydroxyl aromatic aldehydes 1 and aromatic diamines 3 as starting materials, novel bisbenzimidazoles 5 with unsymmetric structure were synthesized via aryloxyacetic acid intermediates 2 . Four new intermediates 4 and ten target molecules 5 were characterized by FTIR, ¹H NMR, ¹³C NMR, MS and elemental analysis. Different synthetic methods, including one‐pot synthesis and intermittent microwave promotion, were investigated. The research provides a new method and idea for the synthesis of bisbenzimidazoles.     

微波辐射合成N-(2-氯-1-氧-5-吡啶甲基)二甲酰亚胺类化合物和生物活性研究

以二甲酰亚胺钾3a～3g与2-氯-5-氯甲基吡啶的N原子氧化后得到的2-氯-1-氧-5-氯甲基吡啶发生亲核取代反应, 用传统和微波两种方法合成了7种未见文献报到的化合物N-(2-氯-1-氧-5-吡啶甲基)二甲酰亚胺类化合物4a～4g. 对比两种合成方法, 在常压下, 微波辐射作为反应热源具有用时少、环境友好、易纯化和产率高的特点. 这些目标化合物4a～4g的结构经元素分析结果, IR, GC-MS, ¹H NMR, ¹³C NMR确证. 初步的生物活性测定结果表明, N-(2-氯-1-氧-5-吡啶甲基)二甲酰亚胺类部分化合物具有良好的杀虫活性.     

One‐pot Green Synthesis of Pyrrole Derivatives Catalyzed by Nano Sulfated Zirconia as a Solid Acid Catalyst

A new and efficient method for the preparation of N‐substituted pyrroles from one‐pot Paal‐Knorr condensation has been accomplished using nano‐crystalline sulfated zirconia (SZ) as the catalyst in ethanol at moderate temperature. This new protocol has the advantages of easy availability, stability, reusability and eco‐friendliness of the catalyst, high to excellent yields, simple experimental and work‐up procedure. The synthesized compounds were confirmed through spectral characterization using IR, ¹H NMR, ¹³C NMR and mass spectra.     

Synthesis and biological evaluation of novel piperidin-4-ol derivatives

Abstract  

A series of novel piperidin-4-ol derivatives were designed, synthesized, and evaluated for potential treatment of HIV. The compounds were obtained via an efficient synthetic route in excellent yields and have been characterized by ¹H NMR, ¹³C NMR, MS, and elemental analysis. The CCR5 antagonistic activities of the compounds have also been evaluated.     

Synthesis,spectral characterization,and biological evaluation of imidazole‐substituted pyridine‐2‐amine and benzo‐substituted imidazole‐2‐amine

A series of new imidazole‐substituted pyridine‐2‐amine and benzo‐substituted imidazol‐2‐amine 3 – 12 were synthesized by treating various amines 1(a – d) with alkyl/aryl isothiocyanate 2(a‐c) at 60–90°C in isopropyl alcohol without using any catalyst with high yields. The structures of all the newly synthesized compounds were characterized using IR, NMR (¹H, ¹³C), mass, and elemental analyses. All the newly synthesized compounds were screened for their in vitro antioxidant and antimicrobial activities to understand their biological potency. All the title compounds exhibited good antioxidant and antimicrobial activities in vitro when compared to the standard drugs.     

Well-defined PEPPSI-themed palladium–NHC complexes: synthesis,and catalytic application in the direct arylation of heteroarenes

In this study, a series of benzimidazolium salts were synthesized as unsymmetrical N-heterocyclic carbene (NHC) precursors. Benzimidazolium salts were used for synthesis of the PEPPSI (pyridine enhanced precatalyst preparation stabilization and initiation)-themed, six new Pd-complexes with the general formula [PdX₂(NHC)(pyridine)]. The structures of all compounds were characterized by various spectroscopic techniques such as ¹H NMR, ¹³C NMR and FT-IR. The more detailed structural characterization of four of the complexes was determined by single-crystal X-ray diffraction study. The catalytic activities of all Pd-complexes were evaluated in the direct arylation of the 2-acetylfuran and 2-acetylthiophene with aryl bromides in the presence of 1 mol% catalyst loading.     

Novel Silsesquioxane-Derived Boronate Esters—Synthesis and Thermal Properties

The functionalization of mono- and octahydrospherosilicate with vinylboranes and allylboranes via hydrosilylation reaction in the presence of a Karstedt’s platinum (0) catalyst is presented. This is the catalytic route to obtain a new class of silsesquioxanes containing boron atoms in their structure in high yields (>90%) and with satisfactory selectivity. The obtained compounds were fully characterized by spectroscopic (¹H, ¹³C, ²⁹Si NMR) and spectrometric methods (MALDI-TOF-MS), as well as thermal analysis (TGA). The obtained compounds were subjected to thermal tests, characterizing the processes of melting, thermal evaporation, sublimation and thermal decomposition.     

Solvent-Free Green Synthesis of Azines and Their Conversion to 2,5-Disubstituted-1,3,4-thiadiazoles

A solvent-free, clean, and efficient method has been developed for the synthesis of 2,5-disubstituted-1,3,4-thiadiazoles via azines. This approach exploits the synthetic potential of clean reactions and offers many advantages such as excellent product yields, easy isolation of products, and ecofriendly benign reaction conditions. The newly synthesized compounds were analyzed by infrared, ¹H NMR, ¹³C NMR, and elemental analysis.     

Efficient and Facile Catalyst‐free One‐Pot Synthesis and Characterization of Some Novel Bis(2‐benzothiazole) Derivatives

A general method for preparation of benzothiazole derivatives including oxidative cyclization of the corresponding Schiff bases was reported. Herein, we have been synthesized a series of new acyclic‐substituted bis(2‐arylbenzothiazoles). Synthesis of analogs substituted in the benzothiazole ring was achieved via the direct condensation reaction of o‐aminothiophenol with some of dialdehyde compounds under catalyst free in high yields. The structure of these products has been fully characterized by physical and spectroscopic data such as IR, ¹H‐NMR, ¹³C‐NMR, UV‐Vis, MS, and CHN analysis.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.