含电子媒介物的一次性葡萄糖传感器的响应性能

目前,适合于测量体内、外生理溶液中葡萄糖浓度的葡萄糖检测装置中,国外便携式产品占据全部国内市场,其中绝大部分是基于比色原理,近些年国外又推出一次性使用电化学葡萄糖传感器。基于葡萄糖传感器中新的测量电流方法,本文主要从材料选择和结构进行研究,以提高传感器的性能。本研究以水溶性高分子材料聚丙烯酰胺为载体,探讨加入电子媒介物铁氰化钾后,一次性传感器的各种影响因素及影响规律,并探索工作电极和参比电极为相同材料的可行性,为制作性能优良的一次性传感器提供依据。     

扫描电化学显微镜直接电沉积法构建葡萄糖氧化酶微米点

利用自制的凹形电极在铂基底电极上直接构建了葡萄糖氧化酶微米点. 首先, 将电聚合和电化学刻蚀法相结合制备了凹形铂微米电极. 然后将此种电极作为参比及辅助电极, 基底铂电极作为工作电极, 利用葡萄糖氧化酶在合适的条件下(浓度、一定量Triton X-100存在、电极电位等)由于电极表面pH的降低可以在铂电极上电沉积这一特性, 将酶固定在铂基底电极上, 微修饰得到了具有活性的葡萄糖氧化酶微米点. 最终用扫描电子显微镜和扫描电化学显微镜对所得微米点进行了表征. 所得微米点直径约20 μm, 且具有催化活性. 该方法简便, 干扰因素较少.     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.     

HEC/SiO2凝胶复合物包埋固定化葡萄糖氧化酶的研究

溶胶-凝胶技术;HEC/SiO2凝胶复合物包埋固定化葡萄糖氧化酶的研究     

Pd-Co/C催化剂上葡萄糖的催化氧化反应

Pd-Co/C催化剂上葡萄糖的催化氧化反应     

基于金纳米棒-壳聚糖复合膜的葡萄糖生物传感器

本文采用金纳米棒-壳聚糖复合膜固定葡萄糖氧化酶构建电流型葡萄糖生物传感器.通过电化学交流阻抗法和循环伏安法对酶膜状态进行了表征,得到了相应的等效电路和动力学参数.实验结果表明,金纳米棒-壳聚糖复合膜可以辅助电子传递,提高电极的电流响应,并使生物传感器的使用温度范围有很大的扩展.此传感器表现出对葡萄糖溶液浓度的优良响应,线性范围在2.78×10^-5mol/L—2.22×10^-3mol/L,响应灵敏度约为7.819μA·cm^-2(mmol/L)^-1,表观米氏常数为10mmol/L.本工作还研究了温度和溶液pH值对电极电流响应的影响.     

基于蒸汽溶胶-凝胶法的碳纳米管/普鲁士蓝复合材料的制备及应用

采用蒸汽溶胶-凝胶法将碳纳米管/普鲁士蓝(MWCNTs/PB)纳米复合材料固定于金电极表面,利用碳纳米管与普鲁士蓝纳米粒子间良好的协同效应,制备了用于检测过氧化氢的MWCNTs/PB复合修饰电极。进而在修饰电极表面固定葡萄糖氧化酶,制备了葡萄糖生物传感器。结果表明,该传感器对葡萄     

Microbiosensor based on glucose oxidase and hexokinase co-immobilised on platinum microelectrode for selective ATP detection

ATP determination is of great importance since this compound is involved in a number of vital biological processes. To monitor ATP concentration levels, we have developed a microbiosensor based on cylindrical platinum microelectrode, covered with a layer of poly-m-phenylendiamine (PPD), and layer of co-immobilised glucose oxidase and hexokinase. Conditions for biosensor measurement of ATP (pH, Mg²⁺ and substrates concentration) in vitro and microbiosensor characteristics such as sensitivity, selectivity, reproducibility, storage stability were studied and optimized. Under optimal conditions the microbiosensor can measure ATP concentrations down to a 2.5 μM detection limit with response time about 15 s. Interferences by electroactive compounds like biogenic amines and their metabolites, ascorbic acid, uric acid and l-cystein are rejected in general by the PPD layer. The microbiosensor developed is insensitive to ATP analogues (or substances with similar structure), such as ADP, AMP, GTP and UTP, too. It can be used for ATP analysis in vitro in the reactions consuming or producing macroergic triphosphate molecules to study kinetics of the process and in drug design concerning development of inhibitors specific to target kinases and others target enzymes.     

微量元素硒和糖耐量异常

非胰岛素依赖型糖尿病（ＮＩＤＤＭ）已成为现代社会的主要疾病之一，尤其各种并发平给机体带来的致命后果使倍受重视。而预防的关键是，在耐量异常阶段发现并治疗，效果更佳。已发现在糖耐量异常（ＩＣＴ）时存在各种抗氧化缺陷，因此，硒（Ｓｅ）的抗氧化作用对ＩＧＴ可能有一定的疗效。     

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An amperometric glucose biosensor was developed based on the immobilization of glucose oxidase in the organically modified silicate (ormosil)-polyvinyl acetate (PVA) matrix onto a Prussian Blue (PB)-modified glassy carbon electrode. A higher stability PB-modified electrode was prepared by the electrochemical deposition of FeCl₃, K₃[Fe(CN)₆] and ethylenediamine tetraacetic acid (EDTA) under cyclic voltammetric (CV) conditions. The effects of the potential range of CV conditions, electrolyte cations, applied potential, pH, temperature and co-existing substances were investigated. The detection limit of the glucose biosensor was 8.1 μmol·L⁻¹ (S/N = 3) with a linear range from 20 μmol·L⁻¹ to 2 mmol·L⁻¹ (R = 0.9965). The biosensor presented a fast response and good selectivity. Additionally, excellent reproducibility and stability of the biosensor were observed. Supported by the National High Technical Development Project (863 project) Foundation (Grant No. 2006AA09Z160) and the National Natural Science Foundation of China (Grant No. 20775064)