p,p′-芳炔桥连的四联萘拓扑环芳分子的设计与合成

基于联萘衍生物手性构型高度稳定的特点, 以光学活性的(R)-2,2'-二乙炔基-1,1'-联萘为模板, 设计了3个有趣的拓扑环芳分子——含有4个手性联萘单元的(R,R,R,R)-2a～2c, 并探讨了它们的合成. 合成路线涉及三甲基硅(Me₃Si-)保护基的控制导入, 对位取代的芳基连接桥的链接, 保护基的脱去以及分子间偶合成环4个步骤. 用比旋光度([α]_D), MS, IR, UV-Vis, ¹H和¹³C NMR以及元素分析表征了这些化合物.     

航天高压气体节流过程温变规律研究

基于焦-汤节流原理,针对航天领域常用气体在高压节流过程出现的温变现象,分析了高压气体节流温变过程及规律,开展了不同种类气体的节流温变对气体设备的影响研究。研究表明,对于预先压气的高压气瓶供气模式,氮气设备受节流降温影响较小,氧气设备则需关注节流元件及其下游设备对节流过程强烈降温效应的适应性;对于航天常用的液氮高压空浴汽化后在线压供气模式,为减少节流降温对下游设备的影响,需在高压空浴汽化器出口设置加温设施;对于高压氦气节流减压后的显著升温效应,为减少对下游设备的影响,采用液氮汽化对氦气进行降温是一种较为理想的技术路线。     

掺Ni的ZnO粉末的Raman光谱研究

利用拉曼(Raman)光谱对掺镍(Ni)氧化锌(ZnO)粉末的声子谱进行了研究.在掺杂样品的Raman光谱中仍能观察到未掺杂ZnO的声子模式,此外还观察到两个额外模式.掺杂粉末中观察到ZnO的E2(h)模式表明掺Ni的ZnO仍然保持六角对称结构.652 cm-1额外模式的起源是掺杂引起的ZnO本底缺陷.为了查明544 cm-1处额外模式的起源,分别对掺Ni,掺钴(Co),和掺锰(Mn)的ZnO粉末的Raman光谱进行了对比研究.结果表明544 cm-1额外模式起源于Ni相关的局域振动模式.对光谱中的其他声子模式的起源也进行了讨论;同时还报告了利用325nm激光作激发源观察到掺Ni样品的多重纵光学(LO)声子模式的结果.     

藏药材麻花艽中铜锌铁锰含量分析

采用ICP-AES法对青海省内采集的麻花艽中的铜、锌、铁、锰的含量进行了测定。结果表明,麻花艽中四种元素含量丰富,各部位含量差异较大,其中基部茎部含量较高,入药部位根部次之,为以后的开发利用提供了基础数据。     

Synthesis and Crystal Structure of 1,4,7,10-Tetrakis （2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10- tetraazacyclododecane

A novel molecule tetra-N-alkylation of cyclen （1,4,7,10-tetraazacyclododecane）, 1,4,7,10-tetrakis（2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10-tetraazacyclododecane 2, was synthesized and structurally characterized by single-crystal X-ray diffraction. The molecule turned into chiral helical compound crystals grown from EtOH by slow diffusion at room temperature and three of the four hydroquinone groups of the benzene ring formed a g-electron-rich cavity by C-H…π stacking interaction. The crystal belongs to the monoclinic system, space group P21/C with a = 13.9192（9）, b = 13.2871（6）, c = 22.1894（15）A^°, β = 91.4600（10）°, V = 4102.5（4）A^°3, Z = 4, Dc = 1.219 g/cm^3, C40H52N4O8, Mr = 752.89, F（000） = 1616,μ = 0.088 mm^-1, MoKa radiation （λ = 0.71073）, R = 0.0578 and wR = 0.1389 for 5588 observed reflections with I 〉 2σ（I）. Moreover, compound 2 was characterized with ^1H NMR, ^13C NMR, IR spectra and MS.     

某坦克炮长镜光学系统装调技术

为了解决坦克火控炮长视场稳定激光测距瞄准镜光学系统总装过程中稳像系统Z轴精度不高、校靶范围超差、装表范围超差、三轴平行性差的问题,提出炮瞄镜光学系统总装方法,通过采用光学自准直方法,将前置镜、高精度的平面反射镜工装、长焦距平行光管以及零位仪等设备调校建立瞄准轴零位基准,使三轴（瞄准轴、激光发射轴和激光接收轴）平行性的调校达标,并保证装表、校靶等有活动范围要求的光机部件的活动范围偏差合格,实现产品一次交检合格率由原来的60%提高到95%以上,产品的稳定性和可靠性得到提升,从而确保坦克火炮的首发命中率。     

中德教材“金属与金属矿物”的内容设置比较研究

金属与金属矿物是初中化学重要的学习内容。本文就这部分内容对德国教材与国内上教版义务教育教科书《化学》进行比较,并提出德国教材给我们的启示,以期为我国的教材编写提供借鉴,也为一线教师的教学提供建议。     

Characteristics and properties of metal aluminum thin film prepared by electron cyclotron resonance plasma-assisted atomic layer deposition technology

Metal aluminum (Al) thin films are prepared by 2450-MHz electron cyclotron resonance plasma-assisted atomic layer deposition on glass and p-Si substrates using trimethylaluminum as the precursor and hydrogen as the reductive gas. We focus our attention on the plasma source for thin-film preparation and annealing of as-deposited films related to the surface square resistivity. The square resistivity of as-deposited Al film is greatly reduced after annealing and almost reaches the value of bulk metal. Through chemical and structure analysis we conclude that the square resistivity is determined by neither contaminant concentration nor surface morphology, but by both crystallinity and crystal size in this process.     

Modulation of absorption manner in helicon discharges by changing profile of low axial magnetic field

The modulation of absorption manner in helicon discharge by changing the profile of low axial magnetic field is explored experimentally in this work. The experiments are carried out in Boswell-type antenna driven by 13.56-MHz power source in 0.35-Pa argon environment. The peak of the external non-uniform magnetic field(B_(ex)) along the axis is observed in a range from 0 Gs to 250 Gs(1 Gs = 10~(-4) T), where the electron density varies from 0.5×10~(16) m~(-3) to 9×10~(16) m~(-3).When Bex is located near the tube upper end sealed by a dielectric plate, or near the tube bottom end connected with a diffusion chamber, the plasmas are centralized in the tube in the former case while the strong luminance appears between the edge of the tube and the axial line in the latter case. When Bex is located in the middle of the antenna, moreover, an effective resistance(R_(eff)) peak appears apparently with increasing magnetic field. The glow moves toward first the edge of the tube and then the two antenna legs as the magnetic field increases. The discharge in this case is caused by the absorption of Trivelpiece–Gould(TG) wave. It is suggested that B_(ex) is located in the middle of the antenna to obtain a higher efficiency of power transfer.     

泄漏Lamb波在固井质量评价中的应用

轻质水泥在油气田固井中的广泛应用使得传统声阻抗测井方式难以准确地对固井水泥胶结质量作出评价。本文基于弯曲型Lamb波传播特征对层状介质胶结质量较为敏感的特点,首先对套管井建立合适的层状介质模型,计算了层状介质的平面波反射系数,从反射系数的角度探讨了在套管井内激发弯曲型Lamb波的条件。然后依据该条件并结合声波角谱理论计算了稳态有限宽脉冲束入射时在套管井内产生的弯曲型Lamb波泄漏波的时间波列信号。通过对泄漏波波列信号的分析,得到了弯曲型Lamb波与套管井水泥胶结质量间的关系。研究表明,入射声波在满足一定条件下可以在套管内激发弯曲型Lamb波,其传播时的衰减率与套管水泥胶结质量以及水泥的声学参数均相关,当水泥为轻质水泥或者普通水泥时,其衰减率随着套管水泥间水层厚度的增加而减小,当水泥为快水泥时,其衰减率随着水层厚度的减小而增加,但当水层厚度减为零即套管水泥胶结良好情况下,其衰减率转而变小。