Rh@Pt内凹立方体核壳催化剂的制备及其乙醇电氧化性能

贵金属Rh基催化剂可有效催化乙醇中C―C键断裂,有利于实现乙醇完全电氧化,但Rh催化剂对乙醇电氧化的催化活性较低。本文通过种子介导生长法制备了具有内凹立方体形貌的Rh@Pt/C核壳催化剂,考察了不同Pt壳层厚度的Rh@Pt/C核壳催化剂在碱性介质中对乙醇电氧化反应(EOR)的催化性能。其中Rh@Pt_0.25/C核壳催化剂对EOR的质量归一化电流最高为520 mA/mg,此时面积归一化电流也最高,为0.16 mA/cm²。研究表明,Rh@Pt/C核壳催化剂中Rh和Pt之间的表面应变效应和电子配体效应取决于Rh表面Pt壳层的厚度,Pt壳层厚度的改变,可调控催化剂中Rh和Pt的协同作用,从而减弱毒性中间体对催化剂表面的吸附,优化催化剂对EOR的性能。总体上,Rh表面Pt壳层为3层的Rh@Pt_0.25/C核壳催化剂表现出最优的EOR活性和稳定性,此时催化剂也兼具了较优的抗毒化能力。     

“铁盐+空气”催化氧化体系在绿色交叉偶联反应中的应用——推荐一个本科生科研训练项目

为深入开展创新创业教育与实践,培养学生创新创业能力,提高本科生人才培养质量,进一步推动创新创业教育改革,南开大学开展了“国家级大学生创新创业训练计划”项目。化学学院结合学科自身特点,践行科教融合、理论联系实际的培养方法,不仅能够引导本科生积极参加科研训练,还能将本科生的创新结果应用于实际生产中。实现“科研反哺教学”与“教学支撑科研”这样一个相互补充、相互促进的统一体。本文介绍了一组比较典型的本科生参与“国创”项目的例子,从项目准备入手介绍了该“国创”项目的具体实施过程、同学们所遇困难及收获心得等,希望将我们积累的一些经验与化学相关专业的同学分享,助力他们更好地完成创新项目。     

分析化学理论与实践的融合教学策略——以配位滴定为例

以配位滴定的理论与实验教学为例,基于问题驱动教学法(PBL)教学法,探讨理论与实践相融合的教学策略,培养学生的核心学习能力。     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

锰离子氧化沉淀法实现锂离子电池LiNi0.8Co0.05Mn0.15O2材料的回收和利用

以浓盐酸为浸出剂,以NaOH和NH₄HCO₃为沉淀剂,利用Mn²⁺在碱性条件下的氧化反应改变离子的沉淀次序进而分步回收的方案,探究了浓盐酸酸浸处理三元正极材料LiNi_0.8Co_0.05Mn_0.15O₂的最佳条件。在分步沉淀过程中,Mn²⁺被氧化为不溶于非还原性酸的MnO （OH）₂,并在酸性条件下回收。Ni、Co则在碱性条件下利用NaOH回收,而Li则利用NH₄HCO₃回收。该方法中Mn的回收率达到85.1%,产品纯度达到98.6%; Li的回收率达到95.0%,产品纯度达到99.3%。由回收材料重新合成的三元正极组装的软包电池的首圈放电比容量达到了175 mAh·g^-1,可以以超过99.5%的库仑效率稳定循环50圈。     

室温快速合成Ag基金属有机骨架材料用于电催化还原CO2

选择具有强给电子能力的1,2,4-三唑为配体,成功合成了银基金属有机骨架材料(Ag-MOF)并用于电催化还原CO₂反应(CO₂RR)。借助粉末X射线衍射、透射电子显微镜、扫描电子显微镜、计时电流法等表征手段对材料的晶体结构、形貌和电催化CO₂RR性能进行了系统的研究。与商品化的纳米Ag颗粒对比,Ag-MOF展现出更优异的电催化CO₂RR产物选择性、催化活性和稳定性,在-0.9 V (vs RHE)时,CO的法拉第效率高达96.1%。当电压为-1.1 V (vs RHE)时,电流密度可达17 mA·cm^-2,且电极可以稳定运行300 min。这说明通过选择合适的配体结构,可以改变催化位点周围的化学环境,从而高效将CO₂转化为目标产物。     

基于Python的沉淀滴定学习软件设计与教学应用

在滴定分析教学中,将现代信息化Python编程语言与沉淀滴定分析法深度融合,设计开发了沉淀滴定学习软件。该软件无需安装和建立复杂的函数或计算方程,用户只需选择和输入相应参数,即可实现沉淀滴定曲线的可视化绘制、滴定可行性判断、化学计量点和滴定突跃范围以及滴定误差的计算等。软件以图形界面形式呈现,设计简洁、操作方便、内容丰富,可选择内置或自定义滴定实例,基本涵盖了沉淀滴定法教学大纲中重要知识点内容,便于教师教学和学生自主学习应用,协同提升教学效果。     

基于中空多孔金纳米/石墨烯复合纳米材料的葡萄糖氧化酶直接电化学及其生物传感研究

采用溶液相牺牲模板法制备中空多孔金纳米粒子（HPAuNPs）,并将该材料与还原氧化石墨烯（rGO）复合,用于葡萄糖氧化酶（GOx）在玻碳电极（GCE）表面的有效固定,构建GOx/HPAuNPs/rGO/GCE传感界面。利用扫描和透射电镜、X射线光电子能谱、X射线衍射谱、红外光谱及电化学等方法对材料的形貌与结构,GOx的固定化过程,以及传感器的直接电化学和电催化性能进行表征。结果表明,HPAuNPs和rGO的协同作用能有效促进GOx与电极之间的直接电子转移（DET）。基于GOx/HPAuNPs/rGO/GCE对葡萄糖的良好电催化性能,该方法有效实现了对葡萄糖的高灵敏度检测,其电流响应的线性范围为0.05～7.0 mmol/L,检出限（S/N=3）为16μmol/L。该传感器具有良好的选择性、重现性及稳定性,对实际样品血清中血糖的测定结果令人满意,回收率为98.0%～103%,相对标准偏差不大于5.0%。     

基于氧化石墨烯增敏的聚邻苯二胺分子印迹电化学传感器测定多巴胺

本工作结合分子印迹技术和电化学检测方法对多巴胺(DA)进行了快速测定。以DA为模板分子,邻苯二胺(o-phenylenediamine,oPD)为功能单体,在氧化石墨烯(GO)修饰电极表面通过一步电聚合法制备分子印迹电化学传感器。采用透射电镜(TEM)和扫描电镜(SEM)对GO的形貌进行了表征,通过循环伏安法(CV)和差分脉冲伏安法(DPV)对传感器的电化学性能进行了分析。当DA的浓度在0.4～2000μmol·L^-1范围内时,DA在印迹电极上的DPV峰电流值与其浓度呈线性关系,检出限为8.0×10^-8 mol·L^-1;采用该方法对实际样品中的DA进行测定,回收率在92～108%之间。     

3D ZnIn2S4微球/1D TiO2纳米带异质结构的光催化降解和还原性能

首先采用溶剂热法和高温煅烧法制备1D TiO₂纳米带,其次利用溶剂热法将1D TiO₂纳米带均匀地穿插到片层结构组装而成的3D ZnIn₂S₄微球中,所形成的异质结构能有效抑制光生电子-空穴的复合。二元ZnIn₂S₄微球/TiO₂纳米带复合光催化剂在高浓度染料罗丹明B(RhB)的光降解和Cr(VI)的光还原实验中表现出优异的性能。在模拟太阳光照射下,ZnIn₂S₄/TiO₂纳米带光催化降解RhB和还原Cr(VI)的效率相较于纯TiO₂颗粒(10%,22%)、TiO₂纳米带(45%,40%)、ZnIn₂S₄(62%,65%)、ZnIn₂S₄/TiO₂颗粒(90%,91%)分别提高至100%和100%。最后,通过紫外-可见...