紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

FFT动态相位重建算法的滤波窗影响分析

为了优化相位重建算法，针对波面干涉图的傅里叶频谱，分析了不同滤波窗口的分布特征和频谱响应，通过计算机仿真和实验测试，确定了FFT动态相位重建算法的最佳滤波窗口类型。其中处理仿真干涉图重建的波面与原始波面的波面峰谷值残差为0.008 5λ，波面均方根值残差为0.000 1λ；处理实验干涉图获得的波面与移相干涉测量法获得的波面峰谷值残差为0.009 3λ，波面均方根值残差为0.000 5λ。结果表明:选取Hamming窗进行滤波处理并重建的相位经拟合后得到的波面较参考波面的面形残差最小，相位重建精度优于0.01λ，可进一步应用于大口径光学元件的测量中。     

磁控法测定热发射电子的速率分布

利用磁控法直接测定了真空二极管中发射的热电子的速率分布,并证实了热电子的速率分布有别于麦克斯韦速率分布率.由于空间电荷效应的存在,在磁场较大的情况下数据与理论存在偏差.     

复杂结构沿面闪络产生发展阶段模拟研究

以天光Ⅱ-A装置X-pinch负载腔为例，采用包含场致发射、二次电子倍增模型的三维模拟软件OPAL，对复杂结构中真空绝缘体沿面闪络的产生与发展阶段进行了模拟研究。模拟结果表明，阳极产生的二次电子在平行于绝缘体表面的电场分量的作用下从阴极座向大半径的运动，是导致沿面闪络的主要原因。并提出了阻断沿面闪络的方法及其原理。采用阻断沿面闪络的措施后，后续多次X-pinch负载腔放电实验证明，正常的回流电流增加了近20%，真空绝缘体上的沿面闪络得到了抑制。；     

康普顿效应中电子-光子碰撞过程的研究

康普顿散射公式中光子波长的连续变化与光量子假说在表面上存在着不一致.为此文章分析了康普顿效应中电子和光子的碰撞过程,指出康普顿散射光子波长的连续变化可以通过自由电子连续的“虚光子吸收”和“虚光子发射”过程来加以说明.     

Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.     

Intermetallic Pt2Si：magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,semi-conductor elements,such as Si,have hitherto not been examined.Here we report a simple synthesis of intermetallic Pt2Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction（EOR）.In comparison to Pt,the intermetallic Pt2Si surface turns out to be much more active in catalyzing the EOR：the onset potential shifts negatively by 150 mV,and the current density at 0.6 V increases by a magnitude of one order.Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si,which can not only provide active surface oxygenated species to accelerate the removal of COads,but also strongly alter the electronic property of Pt,as clearly indicated by the core-level shift in XPS spectrum.     

可控偏振的量子点光发射

正瑞典研究人员已公布了一项计划,准备制造能发射线性偏振光的量子点。林雪平大学的Anders Lundskog及其同事通过在基部已加长的微型六角形氮化镓金字塔的顶部"种植"量子点,使氮化铟镓量子点所发射的光处于受控状态。他们发现,发射光的偏振方向与基部延长轴是一致的。通过调节氮化铟镓中的铟含量,原则上就可将由量子点发射的光从紫外线波长调到红外线波长。这种方法的好     

第十五届全国光学测试学术交流会第一轮征文通知

正受中国光学学会委托,中国光学学会光学测试专业委员会订于2014年10月下旬在江西南昌召开第十五届全国光学测试学术交流会,本届会议由南昌航空大学承办。本届年会适逢"十二五"项目实施的关键阶段,将特邀院士与国内著名专家做大会报告,广泛欢迎全国从事光学及光电测试等相关领域的科技人员参加,交流"十二五"阶段的学术研究、技术开发的新进展,研讨新动态、新领域,同时欢迎公司企事业单位到会展示技术成果,洽谈产、学、研合作。一、关于征文内容(1)光学元件(普通元件、非球面元件、自由曲面元件、二元光学元件、天文光学镜面、梯度光学元件、离散光学元件,光栅元件等)的性能参数测试;(2)光学系统的成像质量评价与测试方法;(3)光学材料(玻璃、晶体、光学塑料、微纳结构与特种功能材料)特性参数测试;(4)光学薄膜特性参数     

Projectile fragment emission in the fragmentation of 56Fe on C,Al and CH2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.