准相位匹配LiNbO3蓝光倍频器的研究

采用外加电场极化法,实现了ＬｉＮｂＯ３晶体的周期性极经,并制备出周期为９．５μｍ的三阶准相位匹配周期性极化ＬｉＮｂＯ３晶体（ＰＰＬＮ）;用准连续钛宝石激光器作基频光源,对准相位匹配周期性极化ＬｉＮｂＯ３进行了光学倍频实验,得到了１２μＷ的蓝光输出。     

利用电光效应实现周期极化KTP晶体制作过程的实时监控

KTP晶体与其他非线性晶体相比具有明显的优势,但同时它具有相当高的电导率,因此极化过程中一直存在传导电流,使其不能利用传统的方法有效控制极化反转过程。为了解决这种困难,需要对KTP晶体的极化反转过程进行实时监控。采用了利用电光效应的实时监控方案,并且进行了理论分析,用实验验证了实时监控方案的可行性。与采用该方法前相比,KTiOPO4(简称PPKTP)器件的倍频转换效率提高了数倍。实验表明利用实时监控可以提高周期极化KTP晶体的制备质量和重复性,也可以作为周期极化KTP晶体质量的检验手段。     

St/交联剂乳液共聚包覆硬脂酸改性碳酸钙颗粒的研究

在硬脂酸改性的纳米碳酸钙存在下,通过苯乙烯(St)与多乙烯基单体的乳液共聚合,制备了以纳米碳酸钙为核,以交联聚苯乙烯(PS)为壳的交联型PS/碳酸钙复合纳米粒子.研究了多乙烯基单体的种类和用量以及碳酸钙的用量对聚合反应以及包覆的影响.结果表明,多乙烯基单体以及碳酸钙的引入会使聚合反应速率有不同程度的降低;使用1%~5%的TMPTMA或DVB,可实现PS对碳酸钙颗粒的牢固包覆,不可抽提的PS达94%以上;当碳酸钙用量改变时,需要适当调整乳化剂和多乙烯基单体的用量;IR和TGA的结果表明,随着碳酸钙用量增加,产物中的碳酸钙含量也相应增加;TEM照片和计算结果显示,当碳酸钙用量为14.8%时,绝大部分碳酸钙颗粒被包覆,且基本上每个乳胶粒中包覆一个碳酸钙颗粒,复合粒子具有清晰的核壳结构,壳层厚度约为10 nm,而当碳酸钙用量增加到29.3%和58.7%时,壳层厚度减小,并且出现较多裸露的碳酸钙颗粒.     

纳米SiO_2粒子表面官能团对尼龙6原位聚合的影响

研究了无机纳米粒子表面反应性官能团对尼龙 6 纳米SiO2 原位聚合的影响 .红外光谱和热重分析结果证实了无论对SiO2 进行表面处理与否 ,在原位聚合过程中其表面均能形成一定量的接枝聚合物 .随表面反应性官能团数目的增加 ,SiO2 的表面接枝率呈上升趋势 .与纯的尼龙 6相比 ,带有不同反应性官能团的纳米SiO2 的加入使复合产物的分子量呈下降的趋势 .对应于复合体系中可能发生的反应 ,提出了几种可能的表面接枝的键接方式 .力学性能测试结果显示经表面处理的SiO2 的加入能同时提高复合物的强度和韧性 ,而加入未处理的SiO2 时 ,材料强度可得到提高 ,但韧性明显降低 ,表明由偶联剂处理引入的柔性界面层的存在对于复合材料的力学性能有重要的影响     

COMPARISON OF POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES PREPARED FROM POLYAMIDE 6 AND POLYAMIDE 66 BASED MASTER-BATCHES

Two master-batches,polyamide 66 (PA66)/organo-montmorillonite (OMMT) and polyamide 6 (PA6)/OMMT, prepared by melt compounding with methyl methacrylate (MMA) as co-intercalation agent,have been used to prepare nearly exfoliated PA661montmorillonite (MMT) nanocomposites.The resulting nanocomposites are compared in view of their morphology and properties.Nano-scale dispersion of OMMT is realized in both types of nanocomposites,as revealed by XRD,TEM and Molau tests.PA66/MMT nanocomposites having superior me...     

准相位匹配扇形光栅铌酸锂光波导倍频绿光输出

采用外加电场极化方式对具有扇形光栅的 0 .5mm厚Z切铌酸锂晶体进行极化反转 ,制成了退火质子交换光波导。极化反转周期为 5 .8μm～ 6 .2 μm ,采用Nd∶YAG激光器输出的 1.0 6 4 μm连续激光为基频光波 ,实现了0 .5 32 μm倍频绿光输出 ,相互作用长度为 4mm ,耦入波导的基频光波功率为 10mW ,获得了 2 0 μW的绿色倍频光输出 ,归一化转换效率为 12 5 % (W·cm2 )。     

Effects of electrically inert fillers on the properties of poly(<Emphasis Type="Italic">m</Emphasis>-xylene adipamide)/multiwalled carbon nanotube composites

The effects of three types of electrically-inert fillers, calcium carbonate (CaCO₃), talc and glass fiber (GF), on electrical resistivity, crystallization behavior and dynamic mechanical properties of poly(m-xylene adipamide) (MXD6)/multiwalled carbon nanotube (MWCNT) composites are investigated. The electrical resistivity of MXD6/MWCNT composites is significantly reduced with the addition of inert fillers due to the volume-exclusion effect that leads to increased effective concentration of MWCNTs in MXD6 matrix and also due to improved MWCNT dispersion. The crystallization temperature of MXD6 increases with the addition of MWCNTs, indicating that MWCNTs can act as nucleating agent and induce crystallization of MXD6. The incorporation of inert fillers has no further effect on crystallization behavior of MXD6, but significantly improves the storage modulus of MXD6/MWCNT composite, demonstrating that CaCO₃, talc and GF filled MXD6/MWCNT composites are very promising materials with not only improved electrical property but also excellent mechanical properties.     

异山梨醇型聚碳酸酯与ABS树脂共混体系的结构与性能研究

采用异山梨醇型聚碳酸酯(DB),与掺混型ABS熔融共混制备了具有不同聚丁二烯(PB)含量和丙烯腈(AN)含量的DB/掺混型ABS合金,并在考察掺混型ABS特征对合金结构与性能的影响的基础上,分别使用同种掺混型ABS以及各种商品化ABS树脂,比较了DB/ABS合金和双酚A型聚碳酸酯/ABS合金的性能及其变化规律.结果表明,对DB/掺混型ABS(70/30)合金而言,PB含量变化对于合金拉伸性能的影响明显大于AN含量变化所带来的影响,在PB含量为6.3 wt%条件下,各不同AN含量的合金体系均有最好的性能表现.PB含量和AN含量变化对合金分散相形态的影响与力学拉伸性能变化特征一致.DB/ABS合金体系均具有良好的热稳定性与热力学相容性,受AN含量和PB含量变化的影响较小,合金玻璃化转变温度与DB非常接近.以双酚A型聚碳酸酯为基础的聚碳酸酯(PC)/ABS合金及以异山梨醇型聚碳酸酯为基础的DB/ABS合金,在拉伸性能变化上均表现出完全相同的规律,且无论是采用掺混型ABS还是采用商品化ABS的体系,PC/ABS与DB/ABS合金在拉伸性能所反映出的规律也是基本一致的.     

Effects of Zinc oxide nanoparticles on the morphology and viscoelastic properties of polyamide 6/poly(butylene terephthalate) blends

The morphology of polyamide 6/poly(butylene terephthalate)(PA6/PBT, 70/30, W/W) blends filled with pristine Zinc oxide(ZnO) nanoparticles and ZnO surface-modified by γ-glycidoxypropyltrimethoxysilane(K-ZnO) was investigated. The incorporation of ZnO and K-ZnO by one-step compounding both resulted in a smaller size and narrower distribution of PBT domains and the effect of ZnO was greater than K-ZnO. To reveal the underlying mechanism, two-step compounding in which ZnO or K-ZnO was premixed with PA6 or PBT was conducted and the finest morphology was achieved when mixing PA6 with premixed PBT/ZnO. Transmission electron microscopy(TEM) demonstrated that ZnO was distributed in PBT in all cases and K-ZnO was enriched at the interface except when K-ZnO was premixed with PBT. ZnO and K-ZnO caused a deterioration in the melt rheological properties of PBT, which played a dominating role in the morphological changes. In addition, the interfacial localization of K-ZnO enhanced the dynamic rheological properties of PA6/PBT blends substantially.     

鞍马鞍环三维测力处理系统

为了研究鞍马运动技术,需要测定运动员在鞍马运动时的动力特性,但由于鞍马测力条件苛刻,国内外至今研究甚少.本系统包含传感器、放大器和信号处理机,可提供14种实时处理的测量数据及图表.该系统已应用于鞍马运动的训练与研究,取得了比较好的效果.