超光滑基片表面散射的数值研究

以一阶微分散射理论为基础,从理论和模拟两个方面对超光滑基片表面的散射电磁场进行了数值研究.分析了s偏振光和p偏振光的微分散射随入射角和散射角的分布情况.研究发现,当入射角较大时,p偏振光在某个散射方向的微分散射为0,而无论入射角和散射角如何变化,s偏振光的微分散射均大于0.当用光散射法对超光滑基片进行表面测试时,相对于...     

193 nm氟化物增透膜的特性

 为了研制低损耗、高性能的193 nm氟化物增透膜,研究了基底和不同氟化物材料组合对氟化物增透膜的影响。在熔石英基底上,将挡板法和预镀层技术相结合,采用热舟蒸发方式制备了不同氟化物材料组合增透膜,对增透膜的剩余反射率和光学损耗等光学特性,以及表面粗糙度和应力等特性进行了测量和比较。在分析比较和优化的基础上,设计制备的3层1/4波长规整膜系AlF3/LaF3增透膜在193 nm的剩余反射率低于0.14%,单面镀膜增透膜的透射率为93.85%,增透膜表面均方根粗糙度为0.979 nm,总的损耗约为6％。要得到高性能的193 nm增透膜,应选用超级抛光基底。     

Swiss-Roll燃烧器催化剂结构的实验研究

实验研究了装有Pt覆盖的多孔陶瓷的Swiss-Roll燃烧器的燃烧特性,分别得到了3种不同长度的催化剂基底的熄火极限,并测量3种情况下催化剂壁面及催化剂后部空间的温度。实验结果表明,3种情况中,催化剂基底长4.5mm的燃烧器可燃范围最大,所以此长度较适合此Swiss-Roll燃烧器。从温度数据可以看出来,催化剂后部空间存在反应,且受上游催化剂表面反应强度的影响。     

状态转变增强拉曼光谱

表面增强拉曼散射(SERS)是公认的超灵敏的光谱工具.和传统的优化SERS基底材料或构筑完美的结构策略相比,我们提出了一种极其简单和灵敏的方法,该方法被命名为状态转变增强拉曼光谱(STERS).这种STERS检测方法可广泛的应用于毒品安全检测、食品安全和环境保护等方面.如果我们把这种方法和便携式拉曼光谱仪结合,这种应用...     

On the induced‐fit mechanism of substrate‐enzyme binding structures of nylon‐oligomer hydrolase

We present a detailed computational investigation of the induced‐fit motion in a nylon‐oligomer hydrolase (NylB) upon substrate binding. To this aim, we resort on the recently introduced parallel cascade selection molecular dynamics approach, allowing for an accelerated access to the set of conformational changes from an open‐ to a closed‐state structure to form the enzyme‐substrate complex in a specific induce‐fit mechanism. The structural investigation is quantitatively complemented by free energy analyses within the umbrella sampling algorithm accompanied by weighted histogram analysis. We find that the stabilization free energy is about 1.4 kcal/mol, whereas the highest free energy barrier to be overcome is about 2.3 kcal/mol. Conversely, the energetic contribution for the substrate binding is about 20 kcal/mol, as estimated from Generalized Born/Surface Area. This means that the open‐close induced‐fit motion could occur frequently once the substrate binds to the open state of NylB. © 2014 Wiley Periodicals, Inc.     

Catalyzation of 1,4-additions of arylboronic acids to α,β-unsaturated substrates using nickel(I) complexes

Nickel(I) complexes were generated in situ from Ni (PPh₃)₂Cl₂ using activated iron and the complexes combined with N,N′-bis(4-fluorobenzylidene) ethane-1,2-diamine (BFBED) were then used as a catalyst for the 1,4-addition reaction of arylboronic acids to α,β-unsaturated substrates. The reaction proceeded to completion and did not require the addition of a base but the addition of potassium iodide is crucial to this cross-coupling reaction. Moreover, experimental observations suggested a possible Ni(I)–Ni(III) catalytic cycle mechanism.     

分子印迹聚合物负载纳米金催化剂的制备及其底物识别性能

以4-硝基苯甲醇与氯金酸的络合物为模板,利用聚合物空腔内胺基捕获NaBH4还原的纳米粒子,设计和制备了一种具有底物识别性能的分子印迹聚合物负载纳米Au催化剂(Au/MIP).运用红外光谱、紫外-可见光谱和扫描电镜等方法对催化剂进行了表征.同时以水为溶剂,过氧化氢为氧化剂,考察了催化剂在取代苯甲醇氧化反应中的催化性能.结...     

Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Characterization of different substrates for Raman spectroscopic imaging of eukaryotic cells

For Raman spectroscopic analyses of the cells and other biological samples, the choice of the right substrate material is very important to avoid loss of information in characteristic spectral features because of competing background signals. In the current study, Raman spectroscopy is used to characterize several potential Raman substrates. Raman vibrational bands of the substrate material are discussed. The surface topography is analyzed by atomic force microscopy, and the root mean square surface roughness values are reported. Biocompatibility of the substrates is tested with Hep G2 cells evaluating cellular morphology as well as live/dead staining. Calcium fluoride, silicon, fused silica, borofloat glass, and silicon nitride membranes support cell growth and adherence. Silicon, borofloat glass, and fused silica give rise to Raman signals in the region of interest. Calcium fluoride substrate (UV grade) is suitable for Raman spectroscopic investigation of living cells. Nickel foil is suitable substrate for Raman spectroscopic investigation but cellular adherence and viability depend on the quality of the foil. Silicon nitride membranes coated with nickel chrome is a suitable Raman substrate in closed microfluidic systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Elastodynamic analysis of a thin layer bonded on a visco-elastic medium under combined in-plane and lateral pulse loads

An analytic solution of a thin layer bonded on a visco-elastic medium under the action of in-plane and lateral pulse loads is presented. The analysis is based on double integral transforms with respect to space and time. Representative examples are studied and discussed to determine the influence of the (a) damping and elastic coefficients of visco-elastic medium, and (b) in-plane compression and stretching of the thin layer on wave propagation.