Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.     

Electrical Stimulation of Human Mesenchymal Stem Cells on Conductive Substrates Promotes Neural Priming

Electrical stimulation (ES) within a conductive scaffold is potentially beneficial in encouraging the differentiation of stem cells toward a neuronal phenotype. To improve stem cell-based regenerative therapies, it is essential to use electroconductive scaffolds with appropriate stiffnesses to regulate the amount and location of ES delivery. Herein, biodegradable electroconductive substrates with different stiffnesses are fabricated from chitosan-grafted-polyaniline (CS-g-PANI) copolymers. Human mesenchymal stem cells (hMSCs) cultured on soft conductive scaffolds show a morphological change with significant filopodial elongation after electrically stimulated culture along with upregulation of neuronal markers and downregulation of glial markers. Compared to stiff conductive scaffolds and non-conductive CS scaffolds, soft conductive CS-g-PANI scaffolds promote increased expression of microtubule-associated protein 2 (MAP2) and neurofilament heavy chain (NF-H) after application of ES. At the same time, there is a decrease in the expression of the glial markers glial fibrillary acidic protein (GFAP) and vimentin after ES. Furthermore, the elevation of intracellular calcium [Ca²⁺] during spontaneous, cell-generated Ca²⁺ transients further suggests that electric field stimulation of hMSCs cultured on conductive substrates can promote a neural-like phenotype. The findings suggest that the combination of the soft conductive CS-g-PANI substrate and ES is a promising new tool for enhancing neuronal tissue engineering outcomes.     

表面增强拉曼散射光谱研究聚苯胺纳米棒的构象转变

采用电化学沉积法制备了聚苯胺(Polyaniline,PANI)纳米棒、树枝状银和纳米颗粒银基体。并利用表面增强拉曼散射光谱技术(Surface-enhanced Raman Scattering,SERS)研究了PANI纳米棒的分子链在Ag金属表面的构象变化。实验结果表明由于Ag金属表面的等离子共振效应,PANI分子中N原子的孤对电子与Ag的自由电子产生共轭效应,使得PANI分子链上的电荷重新分布,结果 C—H面内弯曲振动频率和C—C键的伸缩频率向低波数方向移动(蓝移);拉曼散射频率增强的基团在金属表面倾向垂直于分子链的主轴,拉曼散射频率减弱的基团在金属表面倾向平行于分子链主轴。     

Two‐Dimensional Boron Monolayers Mediated by Metal Substrates

Two‐dimensional (2D) materials, such as graphene and boron nitride, have specific lattice structures independent of external conditions. In contrast, the structure of 2D boron sensitively depends on metal substrate, as we show herein using the cluster expansion method and a newly developed surface structure‐search method, both based on first‐principles calculations. The preferred 2D boron on weaker interacting Au is nonplanar with significant buckling and numerous polymorphs as in vacuum, whereas on more reactive Ag, Cu, and Ni, the polymorphic energy degeneracy is lifted and a particular planar structure is found to be most stable. We also show that a layer composed of icosahedral B₁₂ is unfavorable on Cu and Ni but unexpectedly becomes a possible minimum on Au and Ag. The substrate‐dependent 2D boron choices originate from a competition between the strain energy of buckling and chemical energy of electronic hybridization between boron and metal.     

Surface-enhanced Raman spectroscopy based on conical holed enhancing substrates

In this contribution, surface-enhanced Raman spectroscopy (SERS) based on conical holed glass substrates deposited with silver colloids was reported for the first time. It combines the advantages of both dry SERS assays based on plane films deposited with silver colloids and wet SERS assays utilizing cuvettes or capillary tubes. Compared with plane glass substrates deposited with silver colloids, the conical holed glass substrates deposited with silver colloids exhibited five-to ten-folds of increase in the rate of signal enhancement, due to the internal multiple reflections of both the excitation laser beam and the Raman scattering photons within conical holes. The application of conical holed glass substrates could also yield significantly stronger and more reproducible SERS signals than SERS assays utilizing capillary tubes to sample the mixture of silver colloids and the solution of the analyte of interest. The conical holed glass substrates in combination with the multiplicative effects model for surface-enhanced Raman spectroscopy (MEM_SERS) achieved quite sensitive and precise quantification of 6-mercaptopurine in complex plasma samples with an average relative prediction error of about 4% and a limit of detection of about 0.02 μM using a portable i-Raman 785H spectrometer. It is reasonable to expect that SERS technique based on conical holed enhancing substrates in combination with MEM_SERS model can be developed and extended to other application areas such as drug detection, environmental monitoring, and clinic analysis, etc.     

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide (SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38% (4.05 GHz-5.95 GHz) and AR bandwidth of 24.9% (4.4 GHz-5.65 GHz). The bandwidth of the high gain antenna can reach 42.7% (3.95 GHz-6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.     

Using Terpene Synthase Plasticity in Catalysis: On the Enzymatic Conversion of Synthetic Farnesyl Diphosphate Analogues

Four synthetic farnesyl diphosphate analogues were enzymatically converted with three bacterial sesquiterpene synthases, including β-himachalene synthase (HcS) and (Z)-γ-bisabolene synthase (BbS) from Cryptosporangium arvum, and germacrene A synthase (SmTS6) from Streptomyces mobaraensis. These enzyme reactions not only yielded several previously unknown compounds, showing that this approach opened the door to a new chemical space, but substrates with blocked or altered reactivities also gave interesting insights into the cyclisation mechanisms and the potential to catalyse reactions with different initial cyclisation modes.     

Recent progress in experiments for sessile droplet wetting on structured surfaces

Wetting of a sessile droplet on structured or patterned surface can be found in a broad range of applications. The researchers have been promoted to keep working on the topic. The review is on the basis of the recent experimental advances on the sessile droplet wetting on the hydrophobic, hydrophilic, or combined hydrophobic and hydrophilic surfaces under isothermal conditions, and on heating or cooling substrates having nonisothermal conditions. More attention has been paid on the wetting configuration between the sessile droplet and the structured substrate; the research gap has been discussed on identifying the three-phase line shape. Further, the three-dimensional measurement for the sessile droplets on the patterned surfaces with focusing more on the contact line of sessile droplets might reveal new physical insights. This review targets at building a holistic overview on the sessile droplet wetting behaviors on the structured substrate in the past 2 years.     

Novel extracellular polymeric substances produced by Cupriavidus necator IPT 027 grown on glucose and crude glycerol originated from biodiesel

The aim of this study was to evaluate the production and properties of novel extracellular polymeric substances (EPS) from glucose (EPS 1) and crude glycerol (CG) from castor beans oil (EPS 2). Cupriavidus necator IPT 027 cultivated with glucose and CG (35 °C, 150 rpm, 72 hr, pH 7, shaker) produced approximately 1.60 ± 0.01 and 2.83 ± 0.02 g l^?1 EPS, respectively, with high‐molecular weight (3.89 × 10⁵ and 1.89 × 10⁷ Da) and constituted of different functional groups such as uronic acid, monosaccharides (glucose, mannose, arabinose, and fucose) and primary amine group. The composition of the fermentable substrate influenced the melting temperature (221.11 and 230.18 °C), crystallinity (34.36% and 37.11%), degradation temperature (255.06 and 296.62 °C) and morphology. EPS showed pseudoplastic non‐Newtonian fluid behavior in the aqueous solutions, presenting potential applicability biotechnological and industrial mainly in food industry as emulsifiers and biosurfactants. This is the first study on the production and characterization of EPS obtained by C. necator IPT 027 in culture with glucose and CG. Copyright © 2016 John Wiley & Sons, Ltd.     

基于常温无外压的转移印刷技术构筑半球状多级Ag基底

基于自组装技术制备了3种不同粒径的聚苯乙烯微球阵列,并翻制了与微球阵列互补的软模板.基于室温无外压的转移印刷技术制备了聚甲基丙烯酸甲酯半球形微纳阵列,然后基于原位光还原技术在聚甲基丙烯酸甲酯半球表面制备Ag纳米颗粒,构筑了拉曼增强的半球状多级Ag基底.转移印刷技术的关键是利用软模板自身的低表面能和表面羟基化的图案化材料与亲水基底界面间的氢键作用力.