Investigating the Mechanism by Which Intragap States Tailor Light Emission: Case of Copper Deficient and Zn Doped Cu−In−Se Quantum Dots**

The large structural tolerance of I–III–VI group quantum dots (QDs) to off-stoichiometry allows their photoluminescence properties to be adjusted via doping, thereby enabling application in different fields. However, the photophysical processes underlying their photoluminescence mechanism remain significantly unknown. In particular, the transition channels of CuInSe₂ QDs, which are altered by intrinsic and extrinsic intragap states, remain poorly reported. Herein, we investigated the photophysical processes associated with intragap states via electrochemical and optical techniques by using copper deficient Cu−In−Se QDs as well as Zn doped Cu−In−Se QDs. When the Cu/In molar ratios of Cu−In−Se QDs increased from 0.3 : 1 to 0.9 : 1, the photoluminescence spectra displayed a red-shift from 700 nm to 1050 nm. Although there was a blue-shift after the introduction of Zn²⁺ dopants in Cu−In−Se QDs, a significant red-shift occurred (from 660 nm to 760 nm) when the Zn/Cu molar ratios decreased from 0.7 : 0.3 to 0.3 : 0.7. The Gaussian deconvolution results of the photoluminescence spectra and the band gap derived from absorption spectra by fitting supported the fact that the optical transition channels are dependent on the Cu/In and Zn/Cu molar ratios. After the introduction of the Zn²⁺ ions, the alloyed-resultant blue-shift of the emission spectra was observed, primarily due to the enlarged band gap; however, the radiative recombination of prominent intrinsic intragap states is still observed; and only a small proportion of the band-edge exciton undergoes recombination for the sample with low Zn content. Cyclic voltammetry measurements revealed well-defined extrinsic Zn_Cu intragap states (Zn substitution on Cu sites) and intrinsic Cu^x (x= 1+/2+) states in the band gap. The results presented here provide a better understanding of the varying effects of dopant on photoluminescence in terms of I–III–VI group QDs.     

How Doping Affects the Activity of the Aluminum Oxide Support

The performance of heteronuclear clusters [AlXO₃]⁺ (X=Al, AlO₄, AlMg₂O₂, AlZnO, AlAu₂, Mg, Y, VO, NbO, TaO) in activating methane has been explored by a combination of high–level quantum calculations with reported and supplementary gas-phase experiments. With different dopants in [AlXO₃]⁺, the mechanism, reactivity and selectivity towards methane activation varies accordingly. The classic HAT competes with PCET, depending on the composition of intramolecular interactions. Although the existence of terminal oxygen radical is beneficial for classic HAT, the Al_t−C interaction in the [AlXO₃]⁺ clusters as enhanced by the strongly electronegative doping groups (X=Al, AlZnO, Mg, Zn, VO, NbO, TaO) favors the PCET process, facilitating C−H bond breaking. In addition, with different dopants, the destiny of the split methyl group varies accordingly. While strong interaction between Al_t and CH₃ results in the formation of the Al_t−C bond, dopants with variable valance may promote the formation of deep-oxidation products like formaldehyde. It has been discussed in detail how to regulate the activity and selectivity of the active center of the catalyst via rational doping.     

Cu-Doped MoSi2N4 Monolayer as a Potential NH3 Sensor

Cu doped MoSi₂N₄ monolayer (Cu-MoSi₂N₄) was firstly proposed to analyze adsorption performances of common gas molecules including O₂, N₂, CO, NO, NO₂, CO₂, SO₂, H₂O, NH₃ and CH₄ via density functional theory (DFT) combining with non-equilibrium Green's function (NEGF). The electronic transport calculations indicate that Cu-MoSi₂N₄ monolayer has high sensitivity for CO, NO, NO₂ and NH₃ molecules. However, only NH₃ molecule adsorbs on the Cu-MoSi₂N₄ monolayer with moderate strength (−0.55 eV) and desorbs at room temperature (2.36×10⁻³ s). Thus, Cu-MoSi₂N₄ monolayer is demonstrated as a potential NH₃ sensor.     

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO₃⁻RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH₃) in recent years. In this paper, we report that the Fe doping CoS₂ nanoarrays can effectively catalyze the formation of NH₃ from nitrate (NO₃⁻) under ambient conditions. This is mainly due to the increase of the NO₃⁻ reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at −0.9 V vs. RHE, the NH₃ yield rate (R_NH3) of Fe−CoS₂/CC is 17.8×10⁻² mmol h⁻¹ cm⁻² with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH₃ production.     

Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption

In this study, high surface area activated carbon (AC) was prepared from a local palm tree (Phoenix Dactylifera) using a variety of metal carbonates activators and finally achieved an excellent S_BET of 2700 m²/g when Cs₂CO₃ was used as an activating agent at a temperature of 600 °C. Surface modification of AC was carried out using various nitrogen transporting agents, resulting in N-doped ACs with nitrogen content varying from 4.0 to 11.4 %, depending on the functionalizing agents and activators used. The bimodal (presence of micro- as well as meso-porosity) ACs with such excellent surface properties were studied for their CO₂ uptake capacity at two different temperatures (0 and 25 °C) by isotherms recorded at pressure 1 bar and showed a remarkable uptake ability of 3.52 mmol/g (at 25 °C) and 5.6 mmol/g (at 0 °C), respectively. Also, batch experiments with variable pH, contact time, adsorbate concentrations, adsorbent dose, and temperatures were evaluated to understand the mechanism of sorption phenomena of Cr(VI) and Pb(II) achieving > 99.9 % removal capacity by the prepared ACs. Depending on the heavy metal ions being investigated, it was revealed that the pH of the solution and the amount of adsorbent had a direct impact on the total adsorption ability. Nitrogen atoms doped into the carbon frameworks were found to enhance the adsorption in the case of Pb(II) while the removal of Cr(VI) appeared to be unaffected. Maximum adsorption for Cr(VI) was observed at pH 2 and was determined to follow Freundlich isotherm while that of Pb(II) was observed at pH 7 and follows Langmuir isotherm. Best adsorption was found at an adsorbate concentration of 10 ppm and an adsorbent dose of 10 g/L. Kinetic modeling parameters showed the applicability of pseudo-second-order model perfectly.     

Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone–releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.     

A co-activation strategy for enhancing the performance of hematite in photoelectrochemical water oxidation

Hematite(α-Fe_2O_3) is a promising photoanode for photoelectrochemical(PEC) water splitting.However,the severe charge recombination and sluggish water oxidation kinetics extremely limit its use in photohydrogen conversion.Herein,a co-activation strategy is proposed,namely through phosphorus(P)doping and the loading of CoAl-layered double hydroxides(CoAl-LDHs) cocatalysts.Unexpectedly,the integrated system,CoAl-LDHs/P-Fe_2O_3 photoanode,exhibits an outstanding photocurrent density of 1.56 mA/cm~2 at 1.23 V(vs.reversible hydrogen electrode,RHE),under AM 1.5 G,which is 2.6 times of pureα-Fe_2O_3.Systematic studies reveal that the remarkable PEC performance is attributed to accelerated surface OER kinetics and enhanced carrier separation efficiency.This work provides a feasible strategy to enhance the PEC performance of hematite photoanodes.     

氮硫共掺杂多孔碳材料的制备及其在锂硫电池中的应用

锂硫电池因其较高的理论容量和对环境友好等优势被视为极具发展潜力的储能装置,但是多硫化物的穿梭效应极大地限制了锂硫电池的实际应用。本文以葡萄糖为碳源,离子液体为氮源和硫源,KCl和ZnCl₂为模板剂,KOH为活化剂,通过热解工艺合成了氮硫共掺杂多孔碳（NSPC）。XPS和极性吸附实验表明N、S杂原子成功引入并且提高了碳材料对多硫化物的吸附能力,有效缓解多硫化物的穿梭效应,而较高的比表面积（1290.67 m²·g^-1）有助于提高硫负载量。负载70.1wt.%的硫后（S@NSPC）作为锂硫电池的正极材料表现出了良好的电化学性能。在167.5 mA·g^-1的电流密度下S@NSPC的首次放电容量为1229.2 mAh·g^-1,远高于S@PC的861.6 mAh·g^-1,且S@NSPC循环500圈后容量为328.1 mAh·g^-1。当电流密度从3350 mA·g^-1恢复至167.5 mA·g^-1时,可逆容量达到首圈放电比容量的80%,几乎恢复至其初始值。     

高活性和高稳定性的核壳结构PtPx@Pt/C催化氧还原

在质子交换膜燃料电池中,金属铂是最高效的阴极氧还原催化剂之一,但是铂昂贵的价格严重阻碍了其在燃料电池领域中的大规模商业化应用.通过铂与3d过渡金属(Fe、Co和Ni)合金化可以有效提高催化剂的氧还原活性,然而在实际的高腐蚀性、高电压和高温的燃料电池运行环境中,铂合金纳米粒子易发生溶解、迁移和团聚,从而导致催化剂耐久性差.同时过渡金属离子的溶出会影响质子交换膜的质子传导,并且一些过渡金属离子会催化芬顿反应,产生高腐蚀性?OH自由基,加快Nafion和催化剂的劣化.与过渡金属掺杂相比,非金属掺杂具有明显优势:一方面,非金属溶出产生的阴离子不会取代Nafion中的质子,也不会催化芬顿反应;另一方面,与3d过渡金属相比,非金属具有更高的电负性,其掺杂很容易调节Pt的电子结构.因此,本文通过非金属磷掺杂合成具有优异稳定性的核壳结构PtPx@Pt/C氧还原催化剂.通过热处理磷化商业碳载铂形成磷化铂(PtP2),经由酸洗处理产生富铂壳层,即PtPx@Pt/C.X射线粉末多晶衍射结果证明了PtP2相的存在,并且进一步通过电子能量损失谱对纳米粒子进行微区面扫描分析以及X射线光电子能谱分析证实了富铂壳层的存在,壳层厚度约1 nm.得益于核壳结构及磷掺杂引起的电子结构效应,PtP1.4@Pt/C催化剂在0.90 V(RHE)时的面积活性(0.62 mA cm–2)与质量活性(0.31 mAμgPt–1)分别是商业Pt/C的2.8倍和2.1倍.更重要的是,在加速耐久性测试中,PtP1.4@Pt/C催化剂在30000圈电位循环后质量活性仅衰减6％,在90000圈电位循环后仅衰减25％;而商业Pt/C催化剂在30000圈电位循环后就衰减46％.PtP1.4@Pt/C催化剂高活性与高稳定性主要归功于核壳结构、磷掺杂引起的电子结构效应以及磷掺杂增加了碳载体对催化剂粒子的锚定作用进而阻止了其迁移团聚.综上所述,本文为设计同时具有优异活性与稳定性非金属掺杂Pt基氧还原催化剂提供新的思路.     

调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应,具有重大的研究意义.在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注.自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后,不同类型的氮掺杂的碳也得到了深入研究.例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料,兼具丰富的氮位点及良好的三维结构.氮的掺杂对碳原子具有电子调控的作用,是其高氧还原活性的根本原因.本文对金属有机框架衍生的氮掺杂的碳材料进行进一步的电子结构的优化,以提升催化性能.功函是电子逸出表面所需的最少的能量,是材料的电子结构性质之一,其对氧还原反应的影响也有报道,早期以理论计算为基础,探究氧气分子在碳材料表面的解离能与氮掺杂的碳的表面功函的关系,后续则采用开尔文探针显微镜,直接测量了不同元素掺杂的碳表面功函,并建立起功函与氧还原动力学的线性关系.本文通过控制碳材料的功函来调节其电子结构.铯是一种经典的给电子物质,通过将电子注入到掺杂材料表面来降低其功函.因此,本文通过CsCO₃与2-甲基咪唑、Zn(NO₃)₂煅烧形成铯修饰的氮掺杂碳.电镜及XRD均观察不到所得材料中铯的存在,证明碳层中无大颗粒团聚的铯物种.EDS元素分布图表明,铯在碳层中呈原子级均匀分布.Raman谱结果表明,碳的G带发生明显的位置偏移,证明其面内电子结构发生了明显的改变.XPS结果证明铯成功与氮原子配位,通过铯氮键将电子注入到碳骨架.UPS则最终显示,经过铯的修饰,碳表面功函从4.25 eV下降到3.6 eV.表面功函的降低有利于氧气分子的解离,也调节OOH^*中间体的吸附,使其吸附的自由能更接近最优值.材料改性后氧还原性能明显提升,起始电位达到0.91 V vs RHE,半波电位达到0.83 V vs RHE,均接近商业Pt/C催化剂.氧还原反应的动力学电流密度随功函的降低而增大,验证了前人的结论.本文提供了一个较为新颖的电子结构调控策略,为设计新的氧还原催化剂提供了新的思路.