掺氧化钙及相变对高压下立方氧化锆电子结构和光吸收的影响

研究表明,立方氧化锆可作为冲击波实验中的窗口材料.为了使得该材料在常态下保持结构稳定,需添加稳定剂——氧化钙.然而,掺杂会导致其在29 GPa的冲击压力下从立方转变为斜方Ⅱ结构相.因此,该材料在冲击压缩下的电子结构和光学吸收性质以及作为光学窗口的适用压力范围是值得研究的重要问题.本文运用第一性原理的方法,分别计算了在100 GPa范围内两种结构氧化锆的电子结构和光学吸收性质.结果表明:(1)在立方结构相区,冲击压力将导致其吸收边蓝移,而在斜方Ⅱ结构相区,却使得其吸收边红移;(2)在立方结构相区,掺杂将引起能隙变窄(吸收边红移),但对于斜方II相区,却导致能隙变宽(吸收边蓝移);(3)冲击结构相变使得能隙变窄,吸收边红移.本文数据建议,掺氧化钙的立方氧化锆在95GPa的冲击压力范围内可作为光学窗口材料.     

A Pressure‐Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure‐induced disordering could require recognition of an order–disorder transition in solid‐state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B‐site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long‐range ferrimagnetic ordering in the B‐site ordered samples are gradually overwhelmed by B‐site disorder. Theoretical calculations suggest that unusual unit‐cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.     

A Pressure-Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure-induced disordering could require recognition of an order–disorder transition in solid-state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B-site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long-range ferrimagnetic ordering in the B-site ordered samples are gradually overwhelmed by B-site disorder. Theoretical calculations suggest that unusual unit-cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.     

Anisotropic compressive behavior of rigid PVC foam at strain rates up to 200 s−1

The elevated strain rate compressive response of closed-cell polyvinyl chloride (PVC) foam at various densities is investigated. Two loading directions, (i.e., parallel and perpendicular to foam rise direction) were considered to investigate structural anisotropy. The elevated strain rates tests (up to 200 s⁻¹) were performed using a customized drop tower device. Engineering stress/strain behavior, energy dissipation, and maximum stress capacity were obtained for each density and compared against each other. Except for the lowest density of 45 kg/m³, strain rate effects were clearly observed through increased compressive strength and plateau stress when loading in the foam rise direction. The strain rate effect is more evident at higher densities. However, no significant strain rate effect was observed when loading perpendicular to the foam rise direction. Scanning electron microscopy (SEM) analysis showed that plastic hinges are the primary deformation mechanism for PVC foam cells. An analytical model has been calibrated using the experimental results and successfully predicted the mechanical response of the foam. Shape anisotropy has been measured employing the SEM images. The analytical approach was also able to predict the foam's anisotropic mechanical response.     

利用DSP底层结构提高MPEG-4编码的实时性

由于利用TMS320C6000系列的DSP底层结构可以提高图像压缩的实时性,本文在TMS320C6416平台上针对DSP底层结构对MPEG-4视频编码进行了优化,包括对8个运算单元能并行执行的特性进行汇编。针对DSP芯片两级高速缓存的工作特点,对编码器中代码和数据所占用的内存空间进行优化。利用EDMA级联特性在内存开辟双缓冲区,同时完成视频数据编码和传输的工作,从而有效地改善编码效率。实验结果表明：该编码器可以对512 pixel×512 pixel大小的灰度图像,以30 frame/s帧频进行压缩,实现了对视频图像的实时编码。     

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

The behavior of the flow stress of Al-Cu-Mg-Ag heat-resistant aluminum alloys during hot compression deformation was studied by thermal simulation test. The temperature and the strain rate during hot compression were 340-500 °C, 0.001 s⁻¹ to 10 s⁻¹, respectively. Constitutive equations and an artificial neural network (ANN) model were developed for the analysis and simulation of the flow behavior of the Al-Cu-Mg-Ag alloys. The inputs of the model are temperature, strain rate and strain. The output of the model is the flow stress. Comparison between constitutive equations and ANN results shows that ANN model has a better prediction power than the constitutive equations.     

EXISTENCE AND MULTIPLICITY OF POSITIVE SOLUTIONS TO THIRD-ORDER PERIODIC BOUNDARY VALUE PROBLEM

The existence and multiplicity of positive solutions to a periodic boundary value problem for nonlinear third-order ordinary differential equation are established, based on the zero point theorem concerning cone expansion and compression of order type. Our main approach is different from the previous papers on the existence of multiple positive solutions to the similar problem.     

三类构型激光脉冲压缩器光栅拼接误差容限比较

建立了包含拼接光栅的三类典型构型(双程Z型、X型及菱型)激光脉冲压缩器的理论模型. 利用光线追迹法计算压缩器引入的相位变化,结合傅里叶变换的方法仿真分析并比较了各压缩器相应的光栅拼接误差容限. 以远场焦斑峰值能量下降到理想值的0.9倍为限确定了三类压缩器光栅拼接误差容限,明确了不同构型激光脉冲压缩器对拼接误差的敏感程度. 这对脉冲压缩器的选型和设计具有指导意义. 关键词： 光栅拼接 脉冲压缩 误差容限 光线追迹     

双轴压缩下颗粒物质剪切带的形成与发展

本文采用离散元方法,研究了双轴压缩的颗粒体系在刚性边界约束下,局部剪切带的形成和发展过程,注重分析了细观的体积分数、配位数、颗粒旋转角度等参数以及力链结构形态的演变.并从颗粒体系jamming 相图中J点附近的边壁压强和配位数随体积分数的标度规律出发,分析了剪切带内外的体积分数和配位数的变化.结果表明:剪切带形成于颗粒体系的塑性变形开始阶段,此时体系发生剪胀,颗粒体积分数减小,颗粒体系抵抗旋转的能力降低,开始出现细小剪切带,随着轴向应变的继续,细小剪切带发生连接,最终导致贯穿性优势剪切带形成 关键词： 颗粒物质 力链 双轴压缩 剪切带