Rhodium‐Catalyzed Stitching Polymerization of 1,5‐Hexadiynes and Related Oligoalkynes

A new mode of polymerization, rhodium‐catalyzed stitching polymerization, has been developed for the synthesis of π‐conjugated polymers with bridged repeating units from nonconjugated 1,5‐hexadiynes containing both terminal and internal alkyne moieties as monomers. The polymerization proceeded smoothly with a high degree of stitching efficiency under mild conditions, and 1,5,9‐decatriyne and 1,5,9,13‐tetradecatetrayne monomers could also be employed. The present polymerization strategy would be particularly beneficial for the synthesis of polymers consisting of a repeating unit that is difficult to prepare as a stable monomer because it does not require the use of a preformed bridged π‐conjugated monomer.     

Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

“Four-component” assembly of polyaromatic 4H-cyclopenta[b]thiophene structures based on GaCl3-promoted reaction of styrylmalonates with 5-phenylthiophene-2-carbaldehyde

New “four-component” self-assembly of polyaromatic thiophene structures based on styrylmalonates and 5-phenylthiophene-2-carbaldehyde has been developed. This process is promoted by GaCl₃ and involves two [2?+?3]-annulation steps on the CHO-groups and para-substitution into one Ph-ring. The main feature of discovered process is a high diastereoselectivity with a significant increase in molecular complexity. The resulting polyaromatic structures containing two thiophene moieties in each structure have intense color and strong absorption in a near UV spectral region with absorption maxima in the range of 257–360?nm.     

Tricin isolated from Allium atroviolaceum potentiated the effect of docetaxel on PC3 cell proliferation: role of miR-21

For more effectiveness and overcoming the drug resistance Chemotherapy agents, the combination treatment is raised. Flavonoids with different anti-cancer effects are an appropriate choice as lead compounds. Over expressed MiR-21 in prostate cancer is associated with metastasis and drug resistance to chemotherapy with Docetaxel. In this study, the anticancer effect of 4′, 5, 7-Trihydroxy-3′, 5′-dimethoxyflavone (Tricin) was investigated with Docetaxel on PC3 cell line. Tricin was initially isolated from the Allium atroviolaceum by column chromatography and recrystallization method. The chemical structure of isolate was elucidated by spectroscopic techniques. IC₅₀ of Tricin and Docetaxel were assessed 117.5 ± 4.4 μM and 0.1 ± 0.02 nM by MTT assay, respectively. Analysis of results indicates the synergistic effect of combination therapy on decreased proliferation. MiR-21 in treated cells with Tricin significantly decreased compared to control cells. So, Tricin can be effective in the reduction of metastasis and drug resistance of Docetaxel.     

Unveiling the Layer‐Dependent Catalytic Activity of PtSe2 Atomic Crystals for the Hydrogen Evolution Reaction

Two‐dimensional (2D) PtSe₂ shows the most prominent layer‐dependent electrical properties among various 2D materials and high catalytic activity for hydrogen evolution reaction (HER), and therefore, it is an ideal material for exploring the structure–activity correlations in 2D systems. Here, starting with the synthesis of single‐crystalline 2D PtSe₂ with a controlled number of layers and probing the HER catalytic activity of individual flakes in micro electrochemical cells, we investigated the layer‐dependent HER catalytic activity of 2D PtSe₂ from both theoretical and experimental perspectives. We clearly demonstrated how the number of layers affects the number of active sites, the electronic structures, and electrical properties of 2D PtSe₂ flakes and thus alters their catalytic performance for HER. Our results also highlight the importance of efficient electron transfer in achieving optimum activity for ultrathin electrocatalysts. Our studies greatly enrich our understanding of the structure–activity correlations for 2D catalysts and provide new insight for the design and synthesis of ultrathin catalysts with high activity.     

Study of nano‐Cu/SiO2 catalysts for highly selective hydrogenation of acetophenone

Hydrogenation of acetophenone over nano‐Cu/SiO₂ catalysts was investigated. The catalysts, prepared by a liquid precipitation method using various precipitating agents, were characterized using low‐temperature nitrogen adsorption, X‐ray diffraction, temperature‐programmed desorption of ammonia, hydrogen temperature‐programmed reduction, transmission electron microscopy and X‐ray photoelectron spectroscopy. It was found that the catalysts prepared by a homogeneous precipitation method had better activity and stability than those prepared by a co‐precipitation method. The catalyst prepared using urea as precipitating agent had well‐dispersed copper species, high surface area and abundant pore structure. The catalytic performance and mechanism of the Cu/SiO₂ catalysts were further studied. It was found that the activity and stability of the catalysts could be improved by adjusting the proportion of Cu⁺/(Cu⁺ + Cu⁰). The sample prepared using urea as precipitating agent presented higher activity and selectivity. Also, the catalyst prepared using urea maintained a high catalytic performance while being continuously used for 150 h under the optimal reaction conditions.     

Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

σ2 Hessian方程的Pogorelov型C2 内估计及应用

提出利用拉格朗日乘子法重新证明σ2算子的最优凹性,并定义了一个凸锥Γ3?=λ=(λ1,λ2,?,λn)∈Rn:σ1(λ)>0,σ2(λ|i)>0,1≤i≤n。利用σ2算子的最优凹性，给出了σ2Hessian方程Pogorelov型C2内估计，进而证明了σ2(D2u(x))=1,x∈Rn的满足二次多项式增长条件的Γ3?-凸整解为二次多项式。     

Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand‐free click synthesis of diverse 1,2,3‐triazoles and tetrazoles

Magnetic CuFe₂O₄/g‐C₃N₄ hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X‐ray diffraction, high‐resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N₂ adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe₂O₄/g‐C₃N₄ enabled superior performance in the one‐pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work‐up and isolation procedure.