Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Solid‐Phase Approach for the Synthesis of 2‐Amido‐1,3,4‐oxadiazoles

A new solid‐phase approach for the synthesis of 2‐amido‐1,3,4‐oxadiazoles has been developed. In this synthesis, hydroxypentyl JandaJel polymer support was treated with excess of oxalyl chloride to give resin‐bound 2‐chloro‐2‐oxoacetate, and this intermediate was then coupled with different hydrazides to give resin‐bound 2‐(N′‐acylhydrazinyl)‐2‐oxoacetate. Intramolecular dehydrative cyclization of resulting resin‐bound linear precursor followed by direct amidation using aluminum amide reagent provided 5‐substituted 1,3,4‐oxadiazoles as 2‐carboxamides. To explore the scope of this reaction sequence, we synthesized a small set of library using a combination of hydrazides and amines, and the desired products were obtained in good to high yields.     

A simple and rapid method for determination of boron in fast breeder reactor components

The present paper describes a new analytical method developed for direct determination of boron in steels using radio frequency glow discharge optical emission spectrometer. “Single parameter alternative method” technique has been used to optimize the various experimental conditions of glow discharge plasma such as forward power, gas pressure inside plasma chamber, pre-integration time, and integration time. Different emission lines for boron were studied and inter element interference effect is also discussed in the paper. A complete statistical analysis has been done to validate the developed method. A RSD of less than ±5% is achieved for boron in the range of 0.0010–0.020% in Steels using this method.     

Enantioselective LC‐ESI‐MS/MS determination of dropropizine enantiomers in rat plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective and reliable LC–ESI‐MS/MS method for direct quantitation of dropropizine enantiomers namely levodropropizine (LDP) and dextrodropropizine (DDP) in rat plasma without the need for derivatization as per regulatory guidelines. Dropropizine enantiomers and carbamazepine (internal standard) were extracted from 50 μL rat plasma using ethyl acetate. LDP and DDP resolved with good baseline separation (R_s = 4.45) on a Chiralpak IG‐3 column. The mobile phase consisted of methanol with 0.05% diethylamine pumped at a flow rate of 0.5 mL/min. Detection and quantitation were done in multiple reaction monitoring mode following the transitions m/z 237 → 160 and 237 → 194 for dropropizine enantiomers and the internal standard, respectively, in the positive ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 3.23–2022 ng/mL for each enantiomer. The intra‐ and inter‐day precisions were in the ranges of 3.38–13.6 and 5.11–13.8 for LDP and 4.19–11.8 and 8.89–10.1 for DDP. Both LDP and DDP were found to be stable under different stability conditions. The method was successfully used in a stereoselective pharmacokinetic study of dropropizine enantiomers in rats following oral administration of racemate dropropizine at 100 mg/kg. The pharmacokinetic results indicate that the disposition of dropropizine enantiomers is not stereoselective and chiral inversion does not occur in rats.     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

Investigation on dual properties of photosensitive thermotropic liquid‐crystalline poly(benzylidene‐ether)s containing alkanones and methylene spacers in the main chain

Thermotropic main chain liquid‐crystalline poly (benzylidene‐ether)s were synthesized by Claisen‐Schmidt polycondensation reaction of 4,4′‐diformyl‐2,2′‐dimethoxy‐α,ω‐diphenoxyalkanes with acetone, cyclopentanone, and cyclohexanone. The diformyl precursors were synthesized from 4‐hydroxy‐3‐methoxybenzaldehyde with dibromoalkanes of varying spacer lengths. The structure of monomers and polymers was confirmed by elemental analyses, Fourier‐transform infrared, ¹H NMR, and ¹³C NMR spectral analyses. The thermal properties were studied by thermogravimetric analysis and differential scanning calorimetry. Thermogravimetric analysis (TGA) data revealed that the polymers were stable up to 285 °C and start degrading thereafter. Cyclopentanone‐containing polymers are more stable than cyclohexanone‐ and acetone‐containing polymers. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index values using Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using differential scanning calorimetry (DSC), and it was proved that the isotropic temperature decreases with an increase in the length of the spacer. Polarized optical microscopic study showed that cyclohexanone‐containing polymers exhibit nematic threadlike and nematic droplet texture. The photolysis of liquid‐crystal poly(benzylidene‐ether)s revealed that the Entgegen, Zusammen (EZ) photoisomerization proceeds in the system. The band gap energy was calculated from absorption spectra and is in the range of 3.05–3.37 eV and proved that the length of spacers has a significant influence on their absorption and emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012